CNC stružnica

DOOSAN PUMA TT1800 SY

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ML0177-000528, premer struženja: 230 mm, izvrtina vretena: 76 mm, največja hitrost vretena: 5.000 obr/min, skupna višina: 2.700 mm, skupna dolžina: 11.000 mm, skupna širina: 2.400 mm, skupna masa: 10.000 kg, nos vretena: A2#6, Premer palice (maks.): 65 mm, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 31 i-Model A, največji navor vretena: 208 Nm, Število orodnih postaj v orodni glavi 1: 12, Število orodnih postaj v orodnem revolverju 2: 12, DOOSAN PUMA TT 1800 SY CNC Turning Machine - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Connection: 75.21 kVA - Rated current: 13 KA - Total connected load: 68.4 kVA - Max. distance between spindle noses: 980 mm - Saddle swing: 230 mm - Recommended turning diameter: 210 mm - Max. turning diameter on upper turret: 230 mm - Max. turning diameter on lower turret: 230 mm - Max. workpiece length (left and right spindle): 230 mm - Bar working diameter: 65 mm Ihsdpfjx Tzuiex Af Tjt - Front spindle diameter: 110 mm - Boring bar diameter: 32 mm - Travel X1: 165 mm, X2: 190 mm - Travel Z1: 700 mm, Z2: 720 mm - Travel Y-axis: 100 (+-50) mm - Travel C1 and C2 axis: 36° (0.001°) - Rapid traverse X1 and X2 axes: 20 m/min - Rapid traverse Z1 and Z2 axes: 40 m/min - Rapid traverse Y-axis: 7.5 m/min - Rapid traverse B-axis: 40 m/min - Rapid traverse C1 and C2 axis: 600 rpm - Bed guideway width Z1 axis: 414 mm, Z2 axis: 339 mm - Bed guideway width X1 and X2 axes: 240 mm - Includes main and counter spindle each with HAINBUCH chuck, as well as tool holders as shown in the photos - Includes FMB Turbo 5-55 bar feeder and LNS chip conveyor, year of manufacture: 2013 Attention: The item must be collected on a fixed date between 18.02.2026 and 26.02.2026 (exact date to be agreed upon). FCA D-78087 Mönchweiler – loaded onto truck

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) Ihodpfoxp Hmaex Af Tot - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 942 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 600 mm, premer struženja: 230 mm, moč vretenovega motorja: 22 W, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 165 mm, pomik osi Y: 100 mm, pomik po osi Z: 700 mm, hitro pomikanje X-os: 20 m/min, hitri pomik na osi Z: 40 m/min, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 50 obr/min, prehod palice: 65 mm, skupna višina: 2.100 mm, skupna dolžina: 5.000 mm, skupna širina: 2.200 mm, skupna masa: 8.800 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Used 8-axis CNC lathe "DN Solutions model PUMA TT1800SY" equipped with an upper motorized turret featuring Y-axis, lower motorized turret, opposed spindles, and DN Solutions-Fanuc i-Plus iHMI CNC control. Ihsdpswuqp Eofx Af Tot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, stružna dolžina: 230 mm, premer struženja: 230 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 68 mm, nos vretena: A2-6, Doosan TT1800SY Ihodewzxcaopfx Af Tjt

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Ihjdpjvivx Njfx Af Tst C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Stanje: rabljeno, Zgornja gnana glava z osjo Y, spodnja gnana glava, dvojna vretena. Največji obrat nad ležiščem 300 mm. Največji obrat nad podporo 230 mm. Največji obrat nad ležiščem z zgornjo glavo 230 mm. Največji obrat nad ležiščem s spodnjo glavo 230 mm. Največja dolžina struženja 600 mm. Največja razdalja med sprednjim delom desnega in levega vretena 980 mm. Območje rezkanja zunaj osi struženja z uporabo Y osi mm 100 (+/- 50). Največji premer obdelovane palice (levo vreteno) 65 mm. Največji premer obdelovane palice (desno vreteno) 65 mm. Največja dovoljena teža obdelovanca brez uporabe konturnega vretena (vključno s težo vpenjalne glave = 23 kg) 12 kg. Skupna teža 7800 kg. Dodatki: Podajalnik SS 2500, dolžina 200-1525 mm. Isdpex Np U Ajfx Af Tjht

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 300 mm Turning length 600 mm Control FANUC, 18i-TB Swing diameter over cross slide 230 mm Travel X1 165 mm Travel Z1 700 mm Travel X2 190 mm Travel Z2 720 mm Travel Y +/- 50 mm Main spindle bore 76 mm Main spindle speed 5,000 rpm Main spindle motor 22 kW Spindle torque 208 Nm Counter spindle bore 76 mm Counter spindle speed 5,000 rpm Counter spindle motor 22 kW Spindle torque 208 Nm Tool turret 2 x 12 stations Number of live tool stations 2 x 12 Ijdpfxjxn Amts Af Teht Live tooling speed 5,000 rpm Torque 47 Nm Tool drive power 5.5 kW C-axis resolution 0.001° Rapid traverse X + Z axes 20 / 40 m/min Rapid traverse Y axis 7.5 m/min Total connected load 68.4 kVA Machine weight approx. 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA BB208, 210 mm diameter, on counter spindle, various tool holders for turret, short bar loader by HYDRAFEED, model MULTIFEED MX-1B for bar diameter 3 - 80 mm and bar lengths up to 1650 mm; chip conveyor, coolant system with band filter unit

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 119.571 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 45.000 m/min, model krmilnika: Siemens 840 D, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Machine ON: 119 571 h, vreteno ON: 56 792 h - Vreteno HSK-A63 10.000 min⁻¹ - 32 orodnih mest - Rotacijska miza SRT 280 mm z integriranim vpenjalnim sistemom HSK100 (če ni potreben, ga je mogoče zapreti ali predelati v sistem za vpenjanje na ničelni točki) - Zunanja dovod hladilne tekočine - Notranja dovod hladilne tekočine s trakastim filtrom iz papirja, 80 bar - Pištola za splakovanje ostružkov - Transporter za ostružke - Ročni upravljalni modul - Samodejna kabinska vrata - 32 orodnih mest plus 87 dodatnih mest ZM87 - Toplotna kompenzacija - BLUM merilna sonda za orodja (bočna) - Merilna sonda Renishaw - Zabojnik za ostružke - Signalna luč za status Stroj je bil popolnoma preverjen in ima geometrijski protokol ter meritve krožnosti. Stroj si je mogoče kadarkoli ogledati in preizkusiti pod napetostjo. Iedpoxcp Srjfx Af Toht Zelo dobro vzdrževano stanje.

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Ihsdpfjd E A I Ijx Af Tst Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: rabljeno, Leto izdelave: 2005, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Swiveling B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Ihjdpfx Aowf Rgfof Tjt Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight approx.: 27.0 t Space requirements approx.: 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO – DMC 100 U duoBLOCK - Swiveling milling head (B axis) - NC rotary table (C axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction system - WITHOUT tools