Center za mlinarstvo Turn-Mill

DOOSAN Puma MX2600ST

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Technical Details Turning Diameter: 760 mm Turning Length: 1540 mm Control System: Fanuc 31i-B Total Power Requirement: 94.42 kW Machine Weight approx.: 15.5 t Space Requirement approx.: m Additional Information Integrated turning center with an infinitely adjustable swiveling milling head and Y-axis, motorized lower turret, and sub-spindle. The upper head is supplied by a tool magazine and is capable of turning or milling at various angles. Even highly complex components can be fully machined without additional repositioning. CNC Control: Fanuc 31i-B Swing Diameter over Bed: 1000 mm Maximum Turning Diameter: 760 mm Gtedpfjyua T Sjx Ab Ejw Maximum Turning Length: 1540 mm Maximum Bar Diameter (manual/continuous): 76/76 mm Y-axis Travel: 230 mm (±115 mm) Chuck (Sub-spindle) ASA Mount: A2-8 Spindle Speed: 4000 rpm kW/AC Motor Power (cont./30min.): 22/26 Turning/Milling Head B-axis Rotation / Indexing: 240° (±120°) Tool Holder: Capto C6 Spindle Speed: 12000 rpm AC Motor Power kW/30min.: 15/18.5 Number of Tools: 40 (Opt. 80) Turret Number of Driven Tools: 12 (12) Power of Driven Tools: 7.8 kW/30min.

Stanje: dober (rabljeno), Leto izdelave: 2003, Tehnični podatki so na slikah. Gsdox R S R Nspfx Ab Ejtw

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 15.500 kg Glavni pogon Število osi: 7 Hitrost vretena: 4.000 vrt/min Moč motorja vretena: 22 kW Krmilna enota Znamka: FANUC Model: Series 31i-MODEL B5 Pomiki Pomik osi X: 630 mm Pomik osi Z: 1.585 mm Pomik osi Y: 115 mm Ta 7-osni DOOSAN Puma MX2600ST je bil izdelan leta 2014 in se ponaša z robustno zasnovo horizontalnega stružnega stroja. Opremljen je z B-osjo ±120°, velikimi pomiki v oseh X, Y in Z ter premerom palice 76 mm. Stroj ima krmilje FANUC 31i-Model B5, menjalnik orodij s 40 postajami in vreteno z močjo 22 kW. Če iščete vrhunske zmogljivosti struženja, razmislite o stroju DOOSAN Puma MX2600ST iz naše ponudbe. Kontaktirajte nas za več informacij. Gtsdjx D E Raopfx Ab Esw Vrste uporabe Struženje

Stanje: zelo dobro (rabljeno), CNC stružnica z Y-osjo DMG MORI - CTX BETA 800 4A ID stroja: 9282 Proizvajalec: DMG MORI Tip: CTX BETA 800 4A Krmiljenje: Siemens 840 D-SL Leto izdelave: 2012 Gtjdpfsxuqw Hjx Ab Esw

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Turning length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, spindle speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, tailstock quill diameter: 125 mm, quill stroke: 280 mm, connected load: 62 kW. Machine dimensions (X/Y/Z): approx. 6500 mm / 2500 mm / 2300 mm, control system: Heidenhain, operating hours: approx. 9000 h. Includes accessories such as a steady rest. Documentation is available. On-site inspection is possible. Gtsdevwcwuepfx Ab Eow

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 19.853 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11170000963, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, 5-Achs-Simultanbetrieb Drehzahl: 18.000 U/min Werkzeugwechsler: 60 Plätze / SK 40 DIN69871 Werkzeuge im Preis enthalten Gsdpewqp Hujfx Ab Eetw IKZ (Innenkühlung) / Blasluft Heidenhain Steuerung 426/430

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm Gtjdowhk Ubspfx Ab Ejw - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle carrier: 150 mm Main drive: - Pole-changing three-phase brake motor: gear transmission with forward/reverse - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring assembly - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screw spindles: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle centre to underside of counter support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 Head, swivelling: 0–140° Spindle feed Quill diameter: 90 mm Quill travel: manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - ABENE milling machine Gjdpewuurwjfx Ab Estw - Heidenhain control - Tool holder set - Coolant pump - Leveling feet - Mounting block - Complete operating documentation Exact scope of supply as per photo series

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm Gtjdpfxjt Apugj Ab Eow See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW Godpfx Ajhzbipsb Ejtw MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.