CNC stružnica

DOOSAN Puma 700 M II

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request. Kedpfx Aasxmhdnjcewu

Stanje: rabljeno, Leto izdelave: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D Shop Turn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Kwodpfsww Nazox Aacsu Number of tools in turret 1: 12 BMT 65 Driven tools: 12 BMT 65 Speed of driven tools: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box integrated in the door - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guides - Tool measurement arm - Programmable tailstock - 23 bar coolant supply - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual pressure clamping

Stanje: dober (rabljeno), Leto izdelave: 2006, Technical data Ø: 400 to 1000 mm Kodpev Tztyefx Aacswu Rectangular: 100 x 400 mm to 1000 x 1100 mm

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 671 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 550 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 35 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain TNC7, teža obdelovanca (maks.): 1.100 kg, širina mize: 800 mm, dolžina mize: 616 mm, vrtljajska hitrost (min.): 20 obr/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Heidenhain TNC7 Vreteno HSK-A63 16000 min-1 30 mest za orodja Toga vpenjalna miza 800x616 Notranji dovod hladilne tekočine 40 bar s papirnim tračnim filtrom Strgalačni transporter Ročni kolešček BLUM LC53-Digilog - prelom/merjenje orodja Kedjyf E Atopfx Aacewu Merilna tipalka BLUM TC Stroj VKLOP: 671 h, vreteno VKLOP: 61 h Stroj je star približno 6 mesecev. Prodaja po naročilu stranke. Ogled možen po predhodnem dogovoru.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 Kodpfx Aouhazgeacewu - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 77.711 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain iTNC530, hitri pomik na osi Z: 45.000 m/min, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Stroj VKLOPLJEN: 77.711 h, vreteno VKLOPLJENO: 16.294 h Kwjdpfsxcp R Iex Aacou - Vreteno HSK-A63 10.000 min-1 - 32 mest za orodja - Okrogla miza SRT 280 mm z integriranim sistemom vpenjanja SK50 (če ni potreben, se lahko zapre ali pa se predela v sistem vpenjanja z ničelno točko) - Zunanji dovod hladilne tekočine - Notranji dovod hladilne tekočine s papirnatim tračnim filtrom 80 bar - Pištola za čiščenje ostružkov - Transporter ostružkov - Ročni upravljalni modul - Avtomatska vrata kabine - 32 mest za orodja plus 87 dodatnih mest ZM87 - Toplotna kompenzacija - BLUM merjenje orodij Wange - Merilna tipala Renishaw - Posoda za ostružke - Signalna luč Stroj je bil popolnoma preverjen in obstaja geometrijski protokol ter krožni test meritve. Stroj si je možno kadarkoli ogledati in preizkusiti pod napetostjo. Zelo dobro ohranjen stroj.

Stanje: rabljeno, Leto izdelave: 1999, x-travel 2000 mm Kodpfev H Ertsx Aacswu y-travel 800 mm z-travel 850 mm Control HEIDENHAIN TNC 360 Total power requirement / kW Machine weight approx. / t Space requirement approx. / m

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 390 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 1.300 mm, prehod palice: 65 mm, skupna višina: 2.700 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, skupna masa: 12.000 kg, Oprema: dokumentacija / priročnik, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofitted in 2022) Control: Siemens 840D Solutionline Number of axes: 5-axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant system and chip conveyor - Differential pressure clamping for main / counter spindle - Workpiece pick-up device - Preparation for bar feeder (available as an option) Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5,000 rpm Kwjdpfeubyv Rex Aacsu Spindle power: 34 kW Counter spindle speed: 6,000 rpm Counter spindle bar capacity: 52 mm Counter spindle power: 20 kW Tool changer: 24 stations B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: • Full enclosure • NC swivel head as B-axis • Coolant unit and chip conveyor • Documentation • Geometric accuracy within new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer’s tolerances for new machines - All wear parts replaced Retrofit 2022: - Z1 and Z2/3 linear guides replaced - Y-axis linear guide replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Slide covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer’s specifications

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Kwsdpfxeph Uk Nj Aacju Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: rabljeno, Leto izdelave: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Letnik: julij 2011 Velikost palete: 500 x 500 mm Pomiki: - X: 730 mm - Y: 730 mm Kwodpfsv Tvh Ssx Aacju - Z: 740 mm Hitrost vretena: 12.000 vrt/min Izmenjevalec orodij: 40 pozicij Transporter ostružkov: kromiran