CNC center za struženje in rezkanje

DOOSAN Puma 2600SY II mit Siemens

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, CNC stružnica DOOSAN Puma 2600SY II s Siemens krmiljenjem; termosenzorji za najvišjo natančnost; Y-os; protivreteno s vpenjalnim kleščnim vpenjalom; premer skozi vreteno 80 mm (glavno vreteno); vse osi so ravninsko vodene - primerno tudi za težko obdelavo; transporter za odrezke, nastavitveni merilnik orodja, zbirnik delov s trakom, hladilna pištola, odsesavanje; 70 bar visokotlačni hladilni sistem; različni fiksni in gnani držaji orodij; Giodpfx Aoy Amflea Ueu

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Gijdpfx Ajt Hw Nysa Uou Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis vertical machining center, the HAAS VF-4SS, was manufactured in 2008. It offers a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer featuring 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, consider the HAAS VF-4SS that we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feed rate: 20.5 m/min • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Giodpfx Aajx D Irmj Uju Additional equipment: • Auger-type chip conveyor • Additional high-pressure filtration system

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, Oprema: Na voljo je tipska ploščica, Mitutoyo coordinate measuring machine model Crysta Apex C7106 Temperature compensation on all axes Active vibration isolation system by BILZ Measuring range X-axis = 700 mm Measuring range Y-axis = 1000 mm Measuring range Z-axis = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw probe head PH10MQ Renishaw change rack SCR200 Renishaw sensor TP200 Renishaw TP200 modules = 6 units Measuring software: MCosmos Gsdpfx Aaewhb A Nj Ujiu PC system WIN10, 27" monitor Reference sphere / calibration sphere Software upgrade optional Hardware upgrade optional Full service available on request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 5.792 h, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 635 mm, proizvajalec krmilnikov: HAAS, obremenitev mize: 794 kg, največja hitrost vretena: 12.000 obr/min, število osi: 3, Ce centre d’usinage vertical 3 axes HAAS VF-3SS a été fabriqué en 2015. Il dispose d’une table de 1.372 × 457 mm, d’une capacité de charge maximale de 794 kg et d’une vitesse de broche de 12.000 tr/min. La machine est équipée d’un changeur d’outils automatique latéral 30+1 ATC et d’une avance rapide de 30,5 m/min. Si vous êtes à la recherche d’une fraiseuse de haute qualité, considérez la HAAS VF-3SS que nous proposons à la vente. Contactez-nous pour obtenir davantage d’informations sur cette machine. • Électrique : • Tension : 354 / 488 V Gsdpfx Aox D I Smja Usiu • Phases : 3 • Fréquence : 50/60 Hz • Puissance nominale : 40 A • Charge maximale : 70 A • Pouvoir de coupure en court-circuit : 10.000 A • Courant de court-circuit : 5.000 A RMS symétrique • Heures machine (par la commande) : • Temps sous tension : 19.635 h • Temps de cycle démarré : 8.564 h • Table : • Dimensions : 1.372 × 457 mm • Changeur d’outils : ATC latéral 30+1 • Unité de commande : Commande numérique Haas

Stanje: rabljeno, Leto izdelave: 2013, A 4-axis CNC machining centre by Spinner is available. Travel distances X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18 m/min, rapid traverse Z: 15 m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10,000 rpm, power: 22kW, tool holder: SK40, tool magazine: 24 positions, weight: approx. 8,000kg. Documentation available. Inspection on site possible. Gedpfx Aaswqd R Ue Ujiu

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), Glavni pogon Gjdpfxex D Rqxj Aa Usiu Število vretenc: 2 Območje hitrosti vretena: 6000 Število osi: 6 Gibi Pomik Y-osi: ±31 mm Hitri pomik Y-osi: 6 m/min Pomik B-osi: 525 mm Hitri pomik B-osi: 40 m/min Hitri pomik C-osi: 600 vrt/min Ta 6-osni NAKAMURA WT-100 je bil izdelan leta 2019 in ima dvoje vreten s hitrostjo 6.000 vrt/min ter močjo motorja 11/7,5 kW vsakega. Ima prebojno sposobnost palic do Ø42 mm ter maksimalni premer struženja Ø190 mm. Stroj vključuje dodekagonalni revolverski nosilec z 24 pozicijami in omogoča hitre pomike do 40 m/min. Če iščete kakovostne stružne zmogljivosti, upoštevajte naš stroj NAKAMURA WT-100. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 540 mm, pomik po osi Z: 850 mm, največja hitrost vretena: 1.500 obr/min, premer struženja nad prečnim suportom: 1.000 mm, skupna dolžina: 2.510 mm, skupna višina: 3.546 mm, skupna širina: 4.155 mm, hitrost pomika os X: 20 m/min, hitrost podajanja os Z: 20 m/min, višina struženja: 825 mm, montažni premer: 1.000 mm, premer obdelovanca (maks.): 1.100 mm, skupna masa: 16.000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Axes: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X Axis: 500+40 mm Gsdpfjyxg N Aox Aa Ujiu - Z Axis: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 - Maximum workpiece weight (including chuck): 1250 kg Turret: - Number of stations: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X - Z: 20 - 20 m/min - X axis ballscrew: Ø 50 x 8 mm - Z axis ballscrew: Ø 50 x 8 mm Motors: - Spindle motor power: 37 - 45 kW - Motorized tool motor power: 7 kW - X - Z axis servo motors: 4 - 7 kW General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16000 kg INCLUDED ACCESSORIES: - CNC control unit 0i-TF Plus (15''), Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, Ethernet, and USB outputs - Belt-driven spindle, 1500rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Without chuck - Servo-assisted BMT turret, 12 stations, prepared for motorized tools - Chip conveyor - High-pressure pump 15 bar - 3-color alarm and end-of-cycle signal light - Integrated machine work light - Support feet - Tool box with service keys - Air blow through spindle system - Upgraded turret motor (from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm)) - Pressure release (dual pressure) - Manual Renishaw M.T.P. presetter - Oil skimmer - Static toolholder kit - Fume extractor preparation - Black color BRAND NEW MACHINE AVAILABLE FOR IMMEDIATE DELIVERY

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Gedpfx Aev E R E Aea Uoiu Control: MSX 701 Maximum spindle speed: 6,000 rpm Drive power – main spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum spindle speed: 6,000 rpm Drive power – sub spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm B-axis: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: rabljeno, Leto izdelave: 2003, Maks. premer struženja: 420 mm Dolžina struženja: 1090 mm Krmiljenje: FANUC serija 18i-TB Prehod glavnega vretena: 108 mm Vpenjalna glava: 250 / 315 mm Območje vrtljajev: 0-3750 min⁻¹ Podajalna hitrost: 18/24 m/min Orodja: 12 Gjdpfjucgylox Aa Uoiu Hod konice: 100 mm Premer konice: 110 mm Priključek: MK 4 Število gnanih orodij: 12 Obrati: 3000 min⁻¹ Navor: 22 Nm Rezervoar za hladilno tekočino: 140 l Skupna potrebna moč: 22/18,5 kW Teža stroja pribl.: 6500 kg Cilindrično držalo DIN 69880: VDI 50 Obdelava palic: Ne Obdelava v vpenjalni glavi: Da Hidravlična luneta notranji premer: Dm 20-165 mm