VDL 2B pralni stroji z bobnom ™

DOLFIN INDUSTRIAL PART WASHING MACHINE

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Gjdefbt Siopfx Ahmsbn Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Stanje: rabljeno, Leto izdelave: 2022, Kartonirka vključno z napravo za vroče lepljenje. Naprava ima malo obratovalnih ur. Primerna je predvsem za izdelke, ki jih je mogoče vstaviti v karton s strani. Gbjdsvb E Evspfx Ahmon

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 7.950 h, Funkcionalnost: popolnoma funkcionalen, Vertikalni obdelovalni center / Vertikalni stružni stroj Proizvajalec: EMAG Model: VL6 (FANUC) Leto izdelave: 2021 Obratovalne ure: cca. 7950 Skupna teža: 10,5 t Glavno vreteno: 28,5 kW Moč pri 40/100 % ED: 41/28,5 kW Navor pri 40/100 % ED: 491/340 Nm Polna moč pri hitrosti vretena: 800 min⁻¹ Najv. število vrtljajev: 3100 min⁻¹ Premični enoti X, Z Pogonska enota revolverja za gnana orodja (C362) s centralno dovodom hladilne tekočine v orodje Najv. število vrtljajev: 9600 min⁻¹ Polna moč pri 3000 min⁻¹ Navor pri 100 % ED: 33 Nm / 10,4 kW Navor pri 40 % ED: 44 Nm / 13,8 kW Navor pri 10 % ED: 56 Nm / 17,6 kW Držalo za gnana orodja: 12 x BMT65 Skladišče in transportni sistem za obdelovance, transporter tipa O (GO 240") sistem nosilnih prizmov za 10 obdelovancev Višina obdelovanca: maks. 250 mm Teža obdelovanca: maks. 40 kg Set (10 kos) nosilnih prizmov za premer obdelovanca: 150–300 mm Zračno pihalo za obdelovanec in vpenjalno pripravo (Pick-Up) Dovod hladilne tekočine: 15 bar Zmogljivost črpalke: cca. 80 l/min pri 15 bar Hladilna enota (6,5 kW, voda-zrak) Dvostranski filter hladilne tekočine, ročno preklopljiv Filtrirna finost: 100 μm, z električnim in mehanskim indikatorjem kontaminacije Gsdpfx Ahowzwu Ijmebn Transporter odrezkov, verižni tip – odvod zadaj Izvedba s tečajnim trakom: odvod zadaj Višina izmeta odrezkov: 1.100 mm (z integriranim rezervoarjem za hladilno tekočino, kapaciteta cca. 500 l) Izvleček emulzijske meglice: zmogljivost cca. 800 m³/h Izpiralna pištola Merjenje obdelovanca s sondo Pihanje sonde Nadzor trajanja orodja (upravljanje nadomestnih orodij) 3-barvni signalni stolp Hitromenjalna vpenjalna glava SMW autoblok KCNS-N400-128 maks. = 3500 min⁻¹ Set trdih osnovnih čeljusti Set mehkih vršnih čeljusti Programska oprema Navodila za uporabo / Navodila za vzdrževanje

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 24 h, Funkcionalnost: popolnoma funkcionalen, Serija DOLFİN-PYM2 naprav za pranje delov so industrijske naprave za čiščenje delov, ki se uporabljajo pred in po reviziji, zlasti v servisih za popravila in vzdrževanje. Deli, ki so nameščeni v napravo, se vrtijo okoli lastne osi s pomočjo košare za pranje, medtem ko se pod pritiskom razpršuje vroča voda z detergentom. S kombinacijo pritiska, temperature in kemičnega učinka se z dela odstranijo vse maščobe in nečistoče. Ker pralni stroji Dolfin delujejo v zaprti zanki, se pri vsakem pranju ne uporablja nova voda ali detergent. Isto posodo za več ciklov uporablja ista tekočina, pri čemer vsi ostanki umazanije ostanejo v pralnem prostoru. Ta lastnost ščiti okolje in zaposlene. Zaradi visoke učinkovitosti in zmogljivosti prihrani energijo, vodo in delo. Gbedpfx Asv Sa I Tjhmsn Deluje avtomatsko v skladu z vnaprej nastavljenimi temperaturnimi in časovnimi vrednostmi. Za nalaganje, predvsem težjih predmetov v košaro oziroma njihovo odstranjevanje iz košare, se košara lahko postavi na transportni voziček, kar pomeni, da jo je mogoče po potrebi odstraniti iz naprave. S pomočjo vozička jo je mogoče enostavno prenesti na katerikoli del delavnice.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Novo naprava MASS International Z-transportni trak NDZ Kotna transportna naprava / transportni trak hitro dobavljivo Primer kot prikazano na sliki: Višinsko nastavljiv kotni transportni trak z nastavljivimi koti NDZ1 Dovodni del 600 mm Dvignjeni del 1300 mm Izhodni del 500 mm Uporabna širina 250 mm Zunanja širina 305 mm (brez motorja) Višinsko nastavljiva izhodna višina 700 - 1000 mm Nastavljivi koti za dovodni in izhodni del Nastavljiv naklon PU trak Barva črna Gbedpfsiz S Htjx Ahmjn L pregrade Razmak med pregradami 500 mm Višina pregrade 30 mm Hitrost traku 3 m/min Standardno krmiljenje z izklopom v sili / gumb za zaustavitev Premično na vrtljivih zavornih koleščkih Trodeleni lijaki za dovodni del Navedena ponudbena cena velja za NDZ1.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, A rotary transfer machine for the production of ball sockets is available. Processing stations: 13, bar feeder: 0433, bar feeder length: 3000 mm, machine power: 40 kW, control system: Hydromat. Includes Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing, and separate Knoll chip disposal. In 2015, the machine was upgraded with SW milling. Documentation available. On-site inspection is possible. Gsdju T Rg Ropfx Ahmebn

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, Poleg navedenih in prikazanih strojev imamo na zalogi tudi številne druge stroje in dodatke (sistemi za peskanje, transportni trakovi in manjši stroji). Stroje je mogoče kupiti ali najeti. Kontaktirajte nas za brezplačno svetovanje na področju vibracijskega obdelovanja, bobnarske in peskalne tehnike. Gsdpfx Aswfdbcohmjbn

Stanje: nepreverjeno (rabljeno), Hydromat HW25-714 Gbjdji Ewtuepfx Ahmsn Manufacturer: Pfiffner Serial number: 5.07.021-1 (4.2 m) Units produced to date: approx. 7,800,000 pcs Footprint: 9 m x 4 m + control cabinet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, CNC Turning and Milling Center DMG Mori CTX gamma 1250 CT (Year 2017) Available from March 2027 Base Machine CTX gamma 1250 CT with turning length of 1,250 mm Main spindle as integrated spindle motor (ISM102) Drive power: 35/45 kW (100/40% duty cycle) Spindle speed: 4,000 rpm Partial hollow clamping device (hydraulic) Draw tube inner diameter: 104 mm, length: 848 mm C-axis and hydraulic spindle brake Chuck flushing device at main spindle (external) Upper cross slide with turning/milling spindle as motor spindle: Speed: max. 12,000 rpm Power: 27 / 36 kW (100% / 40% duty cycle, 2 min) Torque: 160 / 220 Nm (100% / 40% duty cycle, 2 min) Hydraulic clamping during turning operations Tool interface: HSK-A 63 DIN 69893 Y-axis: ±210 mm B-axis: ±120°, torque motor Disc-type tool magazine: 36 stations NC tailstock with bearing-mounted, hydraulically traversable quill and fixed center Absolute, direct travel measuring systems in X, Y, and Z1 axis Coolant pump: 6 bar, 20 l/min, fabric filter, filter fineness 100 µm Cooling system for spindle motors, motor console, turning/milling spindle, and B-axis torque motor Control: CELOS® with Siemens 840D sl Operate and ShopTurn 3G Control & Operation CELOS® with Siemens 840D solutionline Operate including 21.5" ERGOline® Control with multi-touch screen. APPs to simplify machine operation Consistent management, documentation and visualization of job, process, and machine data Networkable with CAD/CAM and compatible with PPS/ERP Extended Equipment Tool chain magazine: 120 stations (instead of 36-station disc magazine) Tool interface: HSK-A 63 DIN 69893 Mechanical oil mist separator Performance: 1,100 m³/h, filter class H13 4-color signal beacon Gedpfjy A Hq Iox Ahmsbn Design variant “BLACK” Work area door, front panel, and front window frame in deep black Tropical package for ambient temperatures up to 40°C Including control cabinet cooling unit Energy meter 3D data model of the workspace (STEP & IGES) – supplied on CD Electric Profibus interface for 6-axis robot (only with Siemens control) Special Equipment / Options Preparation for grinding (using CBN cup wheels), consisting of: Shortened grease lubrication cycle Sealing by plug in the draw tube Flushing of the Z1/X1 telescopes during machining HT 2 handheld operating device Jog, inching, and incremental movement via handwheel Integrated emergency stop function and feed override Tailstock with increased feed force (20 kN) Hydraulically actuated double-piston chuck Forkardt OZRDI 150, consisting of: Integrated pressure intensifier Piston rod clamping Travel monitoring unit with switch cone for clamping piston Ø 150 mm Maintenance-free 5-way oil supply Safety valve system for clamping piston Ø 150 mm Condition The machine has been regularly serviced by DMG Mori customer service and is in excellent technical condition. Inspection is possible under power or during ongoing production. Dimensions & Weight Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg Total weight incl. accessories: approx. 22,605 kg Number of packages: 11 Loading meters: approx. 21 The complete equipment and further technical details can be found in the documentation, which we will gladly provide upon request. Dismantling, removal, shipping, and recommissioning can be organized.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Commissioning: As Okuma stock machine 09.2017 Controller: OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Spindle bore Ø 112 mm Motor power 32kW Torque 955Nm ▪ Hollow clamping cylinder Ø 127mm SMW VNK 320-127 with bore Ø 127mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm Gbedpfxoyviigo Ahmsn ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance, self-cleaning function ▪ Drum-type sump filter TMF300 with clean tank 980l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on lower turret (not possible in combination with driven tools for the lower turret) ▪ Door automation ▪ Robot interface Type E for connecting additional loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50-4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range switching at full speed ▪ Lower turret: 12 stations With cylindrical roller guide in ZB-axis With slideway in XB-axis ▪ Collision Avoidance System (CAS) in real time ▪ 19" Color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical monitor and tilt-adjustable keyboard ▪ Second operating system Windows 7 for operation and open, unrestricted use for Windows 7-compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with stroke +150 / -150 = 300mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20bar pressure Including bag filter, external cooling for tool spindle, pump with max. 3bar pressure ▪ Tooling system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (when using standard chuck) for secure setup ▪ Machine management MacMan with integrated BDE (machine data collection) ▪ Part program storage 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 interfaces ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation by periodic speed variation ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°