Laserski stroj za rezanje

DNE Laser - Member of Bystronic group DNE Soar plus

Stanje: novo, Oprema: osvetlitev, Take your painting process to a new level – with mobile convenience. Mobile spray booths in container design for painting and coating various objects. They are specially designed for mobility, making them easy to transport and set up at different job sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system that prevents the escape of paint mist. The ventilation system ensures that the vapors and particles released during painting are contained within the booth, posing no danger to the surrounding environment. Mobile spray booths are a practical and flexible solution for companies that require a relocatable and efficient painting system, which can be transported from one site to another as needed. Overview of Design and Features Our mobile 20-foot Sapi spray containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The flooring is made from checker plate. Both door wings feature ventilation grilles equipped with fine-pore filter mats. For safety, one door wing is designed as an escape door and fitted with a viewing window. Notably, these are not simply converted shipping containers! We manufacture all our containers from scratch, using only the most durable materials that meet requirements and have been tested and proven to comply with safety standards. Standard shipping containers would not meet the necessary safety standards. Paint Mist Extraction System in the Mobile Spray Container The paint mist extraction wall is mounted in front of the rear wall for the separation of overspray, and is fitted with multi-layer filter mats. The extraction wall consists of a galvanized housing, bent with baffle plates, including various suspension and mounting elements for filter installation. On the container’s exterior, at the rear wall, a powerful and explosion-proof extraction fan with a drive motor is installed on a console. Next-generation Mobile Spray Booths: Meeting EU Requirements and Advancing Coating Solutions The new generation of mobile spray booths must comply with the highest EU requirements. The consideration of new coating systems such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints poses significant demands on conventional spray booths. That’s why we have developed a new and unique mobile spray booth for the next generation of coating solutions. An important criterion is the transport of the workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, air humidification or air drying, condensation drying at low temperatures or hot air drying—whether pre-treating workpieces by high-pressure washing with a water recirculation system, compressed air blasting, or centrifugal wheel blasting technology. Giodpfxjun Shgs Afqsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 33.000 h,

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. Gedpfx Aed Ixadsfqoil A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: novo, Leto izdelave: 2024, Stroj za profiliranje kovinskih stebrov za vinograde se uporablja v vinogradih in sadovnjakih za proizvodnjo kolov in stebrov. Običajno so vinogradniški stebri debeline 1,5-2 mm. Proizvodna linija je sestavljena iz razvijalca (decoiler), servo podajalca-ravnalca, stiskalnice, orodja za vtiskovanje, stroja za profiliranje in giljotine. Gijdpfjt Tcz Uox Afqsl

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts Giedpfx Afjt Hw Iieqol up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: zelen, skupna masa: 12.900 kg, največja dovoljena obremenitev: 3.800 kg, dvižna višina: 15.740 mm, Leto izdelave: 2007, obratovalne ure: 6.100 h, številka stroja/vozila: Roto 38.16, Oprema: UVV varnostni pregled, hidravlika, pogon na vsa štiri kolesa, vilice za palete, Rotating Telehandler Technical Data Working height: 15.74 m Lateral outreach: 12.98 m Slewing range: 415° Length: 6.24 m Width: 2.24 m Clearance height: 2.85 m Lifting capacity: 3,800 kg Platform basket load capacity: 300 kg Total weight: 12,900 kg Stabilizers: Oscillating outriggers Drive: Diesel Attachment: Forks Required driving licence: Class 3/B Inspection/Status Gedpotucp Tofx Afqoil UVV (accident prevention inspection) valid until 11/2025 Operating hours: 6,100 hrs as of 02/2024 Interested? We are at your disposal at any time. You can reach us Monday to Friday from 7:00 am - 4:00 pm! Price stated plus applicable VAT. Subject to prior sale, modifications, and errors.

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. Gisdewbil Sepfx Afqol ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserske ure: 6.900 h, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, moč: 10 kW (13,60 KM), leto zadnje generalne obnove: 2024, delovno območje: 4.020 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, CNC Plano Type Boring Mill – Quill with Rotary Travelling Table Make: SKODA / Model: W200 Base Machine Year: 1986 / Refurbished & retrofitted to CNC by SKODA: 1999 The machine can be inspected by appointment. Technical Specifications: Giedpewxyxqjfx Afqjl Travel: X-axis: 8,000 mm Y-axis: 4,150 mm W-axis: 2,000 mm Z-axis: 1,600 mm Spindle: - Spindle diameter: 200 mm - Tool taper: DIN 2080 AD, ISO 60 - Spindle speed: 0.0 – 930 rpm - Spindle drive power: 77 kW Boring Mill / Rotary Travelling Table: - Make: SCHARMANN - Clamping table surface: 6,000 x 4,000 mm - V-axis travel: 2,000 mm - Maximum table load: 80 t - B-axis: 360°, indexing: 0.001° Accessories: - CNC control: SIEMENS Sinumerik 840 CE - Chip conveyor - ... No guarantee for completeness or accuracy of technical specifications and equipment details. Subject to prior sale. Detailed technical data sheet and further equipment information available on request.

Stanje: nepreverjeno (rabljeno),