Obdelovalni center

DMG DMU 35

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), Control: Siemens Djdpjlawavofx Abgekp Travel paths X/Y/Z: 350 x 240 x 340 mm Spindle speed: 6300 rpm Tool holder: SK 40 Manual swivel rotary table Tool holder Vice Accessories

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power: 14 kVA MACHINE HOURS - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO Dodouhhp Sspfx Abgokp - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, obratovalne ure: 625 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 240 mm, pomik po osi Z: 340 mm, skupna višina: 2.100 mm, skupna dolžina: 2.000 mm, skupna širina: 1.700 mm, skupna masa: 1.600 kg, For sale is a 3+2 axis machining center by DMG, model DMU 35 M. This machine comes from an educational institution and was used for training purposes as well as setup with controls. Especially notable are the low spindle hours. Technical data: Year: 2009 Spindle hours: 625 Machine number: 18065358844 X-axis travel: 350 mm Y-axis travel: 240 mm Z-axis travel: 340 mm Max spindle speed: 6,300 rpm Feed rate: Stepless up to 5,000 mm/min Rapid traverse: 5 m/min Servo motors for X, Y & Z axes Clamping surface: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105° / -150° (mechanical) Max table load: 100 kg Tool change: Manual Tool holder: SK 40 Tool clamp: pneumatic/mechanical Footprint: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized throughout Europe on request, for an additional fee. Prices are subject to VAT. Inspections are possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchasing/Sales Dksdpsx Aiiqjfx Abgsp PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or would you like to sell your machine? For further information or to get in touch, please visit our website.

Stanje: dober (rabljeno), Please read the technical specifications in full. If the machine is of investment interest to you, we kindly request your complete identification, including a correct telephone number and email address, in order to receive an offer. DECKEL Milling Machine / Tool Milling Machine DMU 35 M 3 x 2 Axes CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001 and 2003 (2 units available) Dkjdexz Rdaopfx Abgop Travel paths X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: max. 55/80 Nm Universal tilting-/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox ranges - Full safety enclosure with sliding door - Swivelling control panel - Coolant nozzles on vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine lamp - Serial interface RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops; gunsmiths, etc. It impresses with its versatility, thanks to the additionally manually operable rotary/tilting table which allows 5-sided machining. Condition: good to very good, from a vocational training center, see pictures. Can be tested under power.

Stanje: rabljeno, Table length 400 mm Table width 300 mm Dksdpfxsvwgq Se Abgop X-axis travel 300 mm Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive range of accessories.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2008, številka stroja/vozila: LSP 100T, Proizvodna hidravlična stiskalnica s H-okvirjem 100t Dkedpfxog Rn Efe Abgop z vodenjem Proizvajalec Stenhoj Danska Leto izdelave 2008 Maks. pritisk sile 1.000 kN / 318 bar Stiskalni valj, dolžina hoda 400 mm Miza stiskalnice s T-utorom zgoraj 1.500x900 mm spodaj 1.500x1.050 mm Prehod stojala 1.700 mm Stanje kot novo, stroj je bil uporabljen le za poskusna zaganjanja in je od takrat skladiščen. Vse informacije brez garancije. Brez stroškov prevoza.

Stanje: dober (rabljeno), Leto izdelave: 2010, Obdelovalni center Sugino Xion-II-5AX-CE Proizvajalec: Sugino Machine Limited Japonska Tip: Xion II 5AX CE Letnik izdelave: 2010 Osi: 5 Dkedpfox Hqwgex Abgep Pomik X-os: 300 mm Pomik Y-os: 300 mm Pomik Z-os: 200 mm Zasuk A-os: -90° – +90° Rotacijska os C: 360° Maksimalni premer orodja: 40 mm Maksimalna teža orodja: 15 kg Hitrost vretena: 40.000 obr/min Orodni vpenjalni sistem: HSK-E32 Položajna natančnost osi X, Y in Z: 0,002 mm Ponovljivost osi X, Y in Z: ±0,001 mm Teža stroja: 2800 kg Za pravilnost, popolnost in ažurnost podatkov ne jamčimo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 14.553 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ML0405-000122, izvrtina vretena: 51 mm, največja hitrost vretena: 6.000 obr/min, prehod palice: 51 mm, Premer palice (maks.): 51 mm, Oprema: dokumentacija / priročnik, Zraven stružnice se prodaja tudi podajalec TOP AUTOMAZIONI FU350SX, letnik 2020. Cena je za komplet. Dodpfx Asyym Smebgokp

Stanje: pripravljen za uporabo (rabljen), Effective width: 1500 mm, screw diameter: 2 x 500 mm, motor power: 2 x 3.5 kW, outlet: 2 x 800 x 800 mm, length: 7000 mm, conveying speed: 50 m/min, equipped with a steel support frame, fully enclosed design with hopper extension, inspection possible, year of manufacture unknown, completely overhauled in 2022. Dsdpfxjn Tpm Ao Abgskp

Stanje: rabljeno, Leto izdelave: 1997, obratovalne ure: 10.227 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 525 mm, pomik po osi Z: 500 mm, širina mize: 540 mm, dolžina mize: 1.000 mm, skupna masa: 4.500 kg, največja hitrost vretena: 12.000 obr/min, For sale is a machining center by Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Of particular note are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control on-time: 8,283 h Machine on-time: 31,148 h Program run time: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y axis: 18 m/min Rapid traverse Z axis: 15 m/min Tool changer: 25 Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transportation and loading can be arranged Europe-wide upon request, at an additional charge. All prices are subject to VAT. An inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machine purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? Dedpfx Aew I R I Hebgekp For more information or contact options, please visit our website.