DMG DMU 40 eVo linear l. 2012, IntŠt231419

DMG 40 eVo linear

Stanje: dober (rabljeno), Leto izdelave: 2009, Ref.-št.: 10616 Proizvajalec: DMG Tip: DMU 210 P Leto izdelave: 2009 Vrsta krmiljenja: CNC Krmilje: Heidenhain ITNC 530 Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 257XXXX Hod X-osi: 1800 mm Hod Y-osi: 2100 mm Hod Z-osi: 1250 mm B-os: -30 / +180 ° C-os: 360 ° Obremenitev mize: 8000 kg Vpenjalna površina: 1.700 mm Vpenjalo orodja: SK 50 Hitrost vretena: 10.000 min-1 Največji navor: 288 Nm Skupna priključna moč: 38 kW Število postaj: 60 Notranje hlajenje: 40 bar Podpfx Ajx R R Hcsdyogg Zadrževalni moment: 22.700 Nm Dodatne informacije: - 5-osni obdelovalni center DMG DMU 210 P je namenjen visokotočni obdelavi velikih, težkih obdelovancev. Stroj je mogoče pregledati pod napetostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 Pedsxgnz Topfx Adyegg - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.134 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, model krmilnika: HASS, širina mize: 914 mm, dolžina mize: 2.134 mm, obremenitev mize: 1.800 kg, skupna masa: 11.340 kg, hitrost vretena (min.): 40 obr/min, največja hitrost vretena: 7.500 obr/min, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 864 mm, moč vretenovega motorja: 22 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 406 mm, premer orodja: 63 mm, teža orodja: 5.500 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical machining center with HAAS CNC Psdewrfamspfx Adyegg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck Psdpfjwlvlgox Adyogg • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Walter MINI POWER Nakladalnik Pgedpexnkzfefx Adyeg Fanuc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GS1000/5-T, največja hitrost vrtenja: 30.000 obr/min, skupna masa: 15.500 kg, Letnik izdelave: 2014 Stanje: zelo dobro Magazin: 66 x HSK63 Krmiljenje: Heidenhain 530 Vreteno: n=30.000 Pedpfxjw Awmts Adysgg V mizi integriran Erowa sistem ničelne vpenjalne točke Erowa robot easy 250 avtomatizacija s 6 paletami 3D merilni sistem Oljno-zračna mazalna enota za visokofrekvenčno vreteno Lasersko merjenje Delovne ure vretena:

Stanje: rabljeno, Leto izdelave: 2005, Tehnične podrobnosti: Pomik X: 750 mm Pomik Y: 406 mm Pomik Z: 508 mm Teža stroja pribl.: 4 t Pgsdsx Iwr Tspfx Adysg Hitrost vrtalne vretena: 12.000 obr/min HAAS VF-2 je 3-osni obdelovalni center, zasnovan za natančnost, visoko točnost in zanesljivost.

Stanje: rabljeno, Leto izdelave: 2024, proizvajalec krmilnikov: Sonstige, Opis: Splošno: Leto izdelave: 2024 Pomik X/Y/Z: 800/1.500/700 mm Maksimalna obremenitev mize: 800 kg Merilna natančnost: 0,0005 mm Pedpfoxv Nkuox Adyogg Ponovljivost: 0,002 mm Merilni sistem: Renishaw PH 10M Plus

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. Pedjw Ew T Sopfx Adyjgg The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm Pgjdjwywcijpfx Adyjg A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!