Procesni center

DMG 105V LINEAR

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 14.000 h, največja hitrost vretena: 18.000 obr/min, skupna masa: 10.500 kg, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 D, število osi: 5, This 5-axis universal machining center HERMLE C40U was manufactured in 2007. It features a travel path of 850 mm on the X-axis, 700 mm on the Y-axis, and 500 mm on the Z-axis, with a rapid traverse speed of 45 m/min. The machine is equipped with a spindle speed of 18,000 rpm and a tool changer with 38 positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C40U machine we offer for sale. Please contact us for further details. • Operating voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Total power: 41 kVA • Total rated current: 60 A • Main circuit diagram: 1-322-MS-96-002 • Rapid traverse: 45 m/min • Tool changer: 38 positions • Axis configuration: 5-axis • Linear axes: X, Y, Z • Rotational axes: A-axis (off-center), C-axis (NC rotary tilting table Ø420 mm) • NC rotary tilting table: Ø420 mm Gsdpfxoyly A Ie Agyeip • Internal coolant supply (ICS): 80 bar • Laser tool measurement / tool breakage monitoring • Touch probe: Heidenhain • Electronic handwheel • Electronic thermal compensation • Spindle hours: approx. 14,000 h (spindle replaced 11/2017) • Accessories: without tools, tool holders, and zero-point clamping systems Additional Equipment • Paper band filter • Chip conveyor • Coolant rinsing gun • Oil mist extraction Technical Specification Taper size HSK 63

Stanje: rabljeno, Leto izdelave: 2013, Technical Specifications: X-axis travel: 760 mm y-axis travel: 460 mm z-axis travel: 460 mm Control: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Tool magazine with: 24 positions Table size: 900 x 410 mm Max. table load: 350 kg Feed range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 V DC Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Dimensions of coolant system: 1.7 x 0.7 x 1.35 m Approx. machine dimensions (LxWxH): 1.9 x 2.3 x 2.45 m TNC 620 (Contour control with up to 5 controlled axes, especially suitable for universal milling), can be integrated into network Gjdpfjvhbpdjx Agysip Safety doors with shatterproof plastic windows Chip conveyor Hydraulic unit Coolant filtration unit Rittal chiller on control cabinet Work area interior lighting Handheld control unit

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle carrier: 150 mm Gjdpfx Aewhk Ubegyeip Main drive: - Pole-changing three-phase brake motor: gear transmission with forward/reverse - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring assembly - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screw spindles: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Turning length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, spindle speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, tailstock quill diameter: 125 mm, quill stroke: 280 mm, connected load: 62 kW. Machine dimensions (X/Y/Z): approx. 6500 mm / 2500 mm / 2300 mm, control system: Heidenhain, operating hours: approx. 9000 h. Includes accessories such as a steady rest. Documentation is available. On-site inspection is possible. Gedpsvwcwuefx Agyoip

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 rpm - Spindle drive power: 7.6 kVA LINEAR AXES - Travel distance X/Y/Z axes: 500 / 410 / 610 mm TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 sec TABLE - Table size: 650 x 400 mm Giedpfx Agouhbt Rsyjp - Max. table load: 200 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total drive power: 25 kVA WEIGHT AND DIMENSIONS - Space requirement: 1,640 x 2,100 mm - Machine height: 2,274 mm - Machine weight: 2,250 kg MACHINE HOURS - Operating hours: 9,070 h ACCESSORIES - Control: BROTHER A00 - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without frequency inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 bar - Oil mist extractor: AAF Astrosta - Electrical transformer - Tool holders: 42 pcs

Leto izdelave: 2015, stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, CNC stružnica Doosan Puma 700 M II Krmiljenje: Siemens Sinumeric 828 Letnik: 2022 Dolžina struženja: 1.600 mm Premer struženja: 900 mm Pomik X osi: 470 mm Pomik Z osi: 1.650 mm Število obratov: 3 – 1.500 min⁻¹ Revolver za orodja: 12 mest (vsa gnana) Vpenjanje orodja: BMT 85P Oprema: Samo-centrična luneta Transporter za odrezke Touchsetter Gedpfeyk Tdiex Agysip 3-čeljustna glava Programabilna konica Odvzemalna naprava Hladilna črpalka 20 bar s ciklonskim filtrom Odvzem oljne megle

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Gjdpjwuurwsfx Agyjip Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle centre to underside of counter support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 Head, swivelling: 0–140° Spindle feed Quill diameter: 90 mm Quill travel: manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - ABENE milling machine - Heidenhain control - Tool holder set - Coolant pump - Leveling feet - Mounting block - Complete operating documentation Exact scope of supply as per photo series

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Gsdpfxjvzhf Sj Agyeip Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system: OSP-U100L Travels: X-axis: 1020 mm Y-axis: 510 mm Gisdpforfw Nhsx Agysp Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Tool changer: 20 magazine positions Chip conveyor