CNC avtomatska stružnica

DMG MORI G100/300

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Knodpfxjh Akm Ts Agfjb

Leto izdelave: 2024, stanje: novo, Universal Testing Machine H 5 TMNI (L) 250mm Extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screw spindles, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 test space up to nominal load: Working space width: 420 mm Max. test stroke without test tools, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1325 mm Travel Speeds: Test speed: 0.001 – 1200 mm/min up to nominal load Return speed: 1200 mm/min Kodpfxjiq Hxvo Agfjnb Force Measurement: Measuring range depending on the force sensor used: 0.4 – 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Force measurement resolution depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this effort will be charged separately. Crosshead Travel Measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Leto izdelave: 2025, obratovalne ure: 4 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address. Mechanical Design: Single-spindle universal testing machine with backlash-free recirculating ball screw in C-frame construction, equipped with spindle protection and brushless drive motor, Fmax = 2.5 kN. 1 Test Space up to Rated Load: Working depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Maximum test area height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1375 mm Travel Speeds: Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Force Measurement: Measurement range depending on the force transducer used: 0.4 - 100% of the rated load, class 1 (optional class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this service is subject to an additional charge. Crosshead Travel Measurement: Knjdpfx Agsmdn Trofob Incremental quadrature input with encoder monitoring, storage of crosshead position. Resolution of crosshead travel measurement:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 5.300 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.000 obr/min, vrsta vhodnega toka: trifazni, skupna višina: 1.800 mm, skupna dolžina: 1.700 mm, skupna širina: 1.250 mm, skupna masa: 1.200 kg, Odlično stanje, predvsem proizvodnja majhnih serij iz plastike. Letnik: 2015. Naprava si lahko ogledate v proizvodnji do 39. tedna 2026. Nadzorni sistem: Siemens 828 D Ogled je mogoč po predhodnem dogovoru. Tehnični podatki: Premer obdelovanca nad strojno mizo 85 mm Premer obdelovanca nad strojno posteljo 250 mm Maksimalni premer obdelovanca 85 mm Knsdpozxpt Iofx Agfeb Maksimalna dolžina obdelovanca 225 mm Maksimalni premer palice 25,5 mm Gib: Os Z: 300 mm Os X: 100 mm Menjalnik orodij z 12 mesti za orodja, VDI16, od tega 6 pogonjenih. Število vrtljajev 0 - 6000 vrt/min Glavna vretena: Os C (vreteno, ločljivost) 0,001 ° Masa stroja približno 1200 kg Dimenzije: Dolžina 1700 mm Širina 1250 mm Višina 1800 mm Dodatna oprema: Vpenjalna glava, pištola za čiščenje hladilnega medija, posoda za obdelovane dele, LED opozorilna lučka, 4 klini, strojna dokumentacija.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 5 obr/min, dolžina podajanja os X: 1.200 mm, dolžina pomika po osi Y: 2.000 mm, dolžina podajanja os Z: 700 mm, hitrost pomika os X: 1.000 m/min, hitrost podajanja osi Y: 1.000 m/min, hitrost podajanja os Z: 1.000 m/min, skupna širina: 4.000 mm, San Rocco horizontal boring mill, fully overhauled, from a high-quality aerospace manufacturing operation. CNC control system: Siemens SINUMERIK 840D with SIMODRIVE 611 drive system. The machine is equipped with modern digital drives and is suitable for high-precision multi-axis machining in continuous operation. The machine was overhauled in 2024 and received brand new telescopic covers on all axes, as well as numerous additional minor but essential refurbishments to the hydraulics, CNC control, hoses, and all types of seals. The machine is comprehensively equipped with coolant system, etc. Travel distances: X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle data: Kjdpfsx Rhlcjx Agfenb Boring spindle diameter: 100 mm Tool holder: ISO 50 Milling spindle diameter: 185 mm Spindle axial stroke: 700 mm Feeds and rapid traverses: Automatic feed, spindle and vertical axis: 2 × 1,000 mm/min Rapid traverse, spindle and vertical axis: 5,500 mm/min Clearances: Min. spindle height above table: 0 mm Max. spindle height above table: 1,500 mm Maximal distance spindle nose to table center: 1,850 mm Spindle speeds: Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gear stages: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table data: Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table feeds: Automatic feeds X and Y: 1,000 mm/min each Rapid traverse X and Y: 5,500 mm/min each Table rotation: Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive system: Siemens SIMODRIVE 611 E R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting & transport data: Group 1: Steel bar, diameter 70 mm, length 1,600 mm Steel bar, diameter 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel cables, diameter 22 mm Weight approx. 12,500 kg Group 2: Two steel cables, minimum diameter 18 mm Weight approx. 3,500 kg Group 3: Manual lifting Weight approx. 1,300 kg Condition: The machine is in very good technical condition and can be inspected and tested under power by appointment.

Stanje: novo, Leto izdelave: 2025, dolžina mize: 900 mm, širina mize: 450 mm, število vreten: 1, hitrost vretena (min.): 8.000 obr/min, obremenitev mize: 500 kg, VMC 650 CNC obdelovalni center, rezkalni stroj s CNC krmilnim sistemom Obdelovalni center VMC 650 je večnamenska oprema, ki omogoča izvajanje rezkanja, vrtanja, narezovanja navojev in struženja v avtomatskem načinu (če so te možnosti na voljo pri stroju). Rezkalni stroj VMC 650 je lahko opremljen z orodnim magazinom s 16 ali 24 postajami. Glede na želje kupca je lahko rezkalni stroj opremljen s CNC sistemom GSK, Siemens ali Fanuc. Opcijsko je možna tudi nadgradnja z Y-osnim pogonom. Kot zelo uporabno dodatno opremo priporočamo vgradnjo tračnega transporterja za odrezke (chip conveyor), ki vam bo prihranil čas pri delu s strojem. Tehnični podatki: Knsdpfxexc I Dgs Agfob Velikost delovne mize: 900 x 450 mm Največja teža obdelovanca: 500 kg Pomiki po oseh X/Y/Z: 800/450/500 mm Maksimalna razdalja med vretenom in površino mize: 120–620 mm Moč motorja: 5,5–7,5 kW Maksimalno število vrtljajev vretena: 8000 min⁻¹ Tip vretena: BT40 Natančnost pozicioniranja: ±0,008/300 mm Ponovljivost: ±0,005 mm Dimenzije stroja: 3000 x 2275 x 2550 mm Teža stroja: 4000 kg Po naročilu je možna tudi dobava CNC rezkalnih strojev oziroma obdelovalnih centrov z drugimi velikostmi miz: VMC 850 – miza 1000 x 500 mm VMC 855 – miza 1000 x 550 mm VMC 1060 – miza 1200 x 600 mm VMC 1160 – miza 1200 x 600 mm VMC 1275 – miza 1300 x 700 mm VMC 1370 – miza 1400 x 700 mm VMC 1580 – miza 1600 x 800 mm VMC 1680 – miza 1700 x 800 mm VMC 1890 – miza 2000 x 900 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 25.000 h, skupna masa: 3.900 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TD, število osi: 4, This 4-axis DOOSAN LYNX220LSYA horizontal lathe was manufactured in 2014. It provides robust performance for precision turning operations. If you are looking for high-quality turning capabilities, you should consider the DOOSAN LYNX220LSYA machine we are offering for sale. Contact us for more information. Machine Advantages Qualitative Machine Advantages Knodpfx Asx D I T Rsgfsb • Adapter/housing set for internal machining • Preciflex live holder supplementary adapter set • A set of barely used tools is available at an additional cost. Technical Machine Advantages • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) • Face machining holder • Internal machining holder • Double external turning tool holder (on both sides) • Triple internal machining holder • Axial driven tool holder (left side) • Axial driven tool holder (left side) • Radial driven tool holder Additional Information Machine still under power

Stanje: dober (rabljeno), Leto izdelave: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table through-hole: 100 mm Ram surface: 120 x 100 mm Installation height: 250 mm Total power requirement: 1.1 kW Knodpet Tqglofx Agfsb Machine weight approx. 1,150 kg Space requirements approx. 0.96 x 1.34 x 1.88 m - Positive-fit Ortlinghaus clutch - Not suitable for manual loading operations - Press has been inspected in-house and delivered with a current DGUV (German accident prevention regulation) certificate

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, nastavitev hidravličnega cilindra: 40 mm, vgradna višina: 2.400 mm, skupna širina: 17.000 mm, dolžina mize: 400 mm, širina mize: 400 mm, stiskalna sila: 25 t, nastavitev hoda: 17 mm, delovna širina: 200 mm, skupna masa: 2.500 kg, leto zadnje generalne obnove: 2023, moč: 0,003 kW (0,00 KM), Manufacturer: MABU Model: 25 VPR. Made in Germany. Completely overhauled in Dec. 2023. Max. force: 250 kN (25 t). Kjdpoq Ikhpefx Agfjnb Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand start and foot pedal start. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Power output: 3 kW. Power supply: 230 / 400 V. Air connection: 5.5 bar. Feed unit: Silicon SFS 200, left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu Pf 1.3 control system. Front and rear safety guards with inspection window. Technical documentation and operating manual in English and German included. CE certificate and EUR-1 certificate of origin. In stock, tested and ready for shipment. Additional used machines from Mabu, Bruderer, Bihler, and Schaal available for sale from our inventory.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Usata Giddings & Lewis Modello MC 50 Twin Pallet Centro di Lavoro Orizzontale con Mandrino Motorizzato, Cambio Utensili Automatico a 60 posizioni e Controllo G&L 8000A. Numero di serie: 445-1052. Anno di costruzione: 1987. Macchina precedentemente installata presso Rolls Royce Plc a Derby, Regno Unito. Disponibile immediatamente per la vendita e attualmente situata in Belgio, dove è possibile visionarla. Knsdpfeu Dahnsx Agfsb Diametro mandrino – 130 mm Cono mandrino – ISO 50 Corsa mandrino (asse Z) – 915 mm Velocità mandrino (4 gamme) – 5 a 1500 giri/min Motore principale – 30 HP Dimensioni pallet – 1219 x 1245 mm Rotazione pallet – incrementi di 0,001°, 360.000 posizioni Portata massima pallet con cambiopallet – 5.000 kg Portata massima pallet senza APC – 9.000 kg Corsa longitudinale (W) – 1.700 mm Corsa verticale testa (Y) – 1.500 mm Corsa trasversale (X) – 1.800 mm Avanzamenti – da 1 mm/min fino a rapido Avanzamento rapido (X e Y) – 4.500 mm/min Avanzamento rapido (Z e W) – 3.000 mm/min Cambio utensili automatico – 60 posizioni Alimentazione elettrica – 415V, 3Ph, 50Hz CARATTERISTICHE E DOTAZIONI Refrigerazione interna ad alta pressione (25 Bar) attraverso il mandrino, macchina di alta precisione. Macchina precisa, ben mantenuta e regolarmente calibrata dal costruttore. Sonda di misura Renishaw. Dimensioni: Lunghezza – 11.679 mm, Larghezza – 6.502 mm, Altezza – 4.423 mm Peso – 40.329 kg