CNC stružno-rezkalni center

DMG MORI ECOTURN 510 V3

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Njdpjwbhipofx Adyewb

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Njdpfx Ajxddamjdyewb Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Njdpfx Adschhfueyowb Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: nepreverjeno, številka stroja/vozila: 73136, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 720 mm, nazivna (navidezna) moč: 64 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, skupna višina: 3.150 mm, skupna dolžina: 5.605 mm, skupna širina: 4.290 mm, skupna masa: 12.600 kg, hitrost vretena (min.): 15.000 obr/min, delovne ure vretena: 21.786 h, število mest v zalogovniku orodij: 46, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (read): Control on: approx. 112,194 h Machine on: approx. 72,272 h Spindle on: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with typical signs of wear, technically functional. Inspection under power possible by arrangement. Working Areas Travel paths: X-axis: 1350 mm Y-axis: 1150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration time to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur-St Lubrication: Lifetime-lubricated Cooling: Water with corrosion protection Feed Drives Feed motors: AC Rapid traverse/Working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle per hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Location bore: Ø 50 H6 Clamping torque: 8000 Nm Max. moment of inertia: 75 kg·m² Table stroke above floor: 1120 mm Table drive: Torque motor, direct Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm fully equipped 130 mm partially equipped Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Chip-to-chip time (vertical): 11 s Coolant / Chip Removal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed nominal power: 75 kW Power connection: 58 kW Connection rating: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Nwedpfx Aex Eh Iqjdyjb Machine weight: approx. 12,600 kg (without accessories) Space requirement (L × W × H): 5605 × 4290 × 3150 mm

Stanje: rabljeno, Leto izdelave: 2008, Used drilling center by CMA Model: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008 Nsdpfx Aewc Ndwodyowb

Stanje: kot nova (razstavni stroj), dolžina mize: 500 mm, širina mize: 300 mm, Surface grinding machine Ziersch Z35 - Demo unit, unused - Grinding area: 500mm x 350mm Nwsdpfxovvwf Do Adyeb Dressing device Permanent magnet Belt filter system with magnetic separator

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Prebijalna sila: 220 kN, delovno območje v kombiniranem načinu X/Y: 2.585 mm/1.650 mm, delovno območje v načinu prebijanja: 3.085 mm/1.740 mm, delovno območje v laserskem načinu X/Y: 3.085 mm/1.650 mm, največja debelina pločevine (konstruktivno jeklo/nerjavno jeklo/aluminij): 8 mm/6 mm/4 mm, največja teža obdelovanca: 230 kg. Hitrost pozicioniranja: 109 m/min, največja zmogljivost hodov: 900 hodov/min, največja zmogljivost označevanja: 2.800 hodov/min, število orodnih mest: 18, natančnost: +/- 0,1 mm. Dimenzije stroja X/Y/Z: pribl. 8.000 mm/9.000 mm/2.500 mm, teža: pribl. 22.500 kg. Dokumentacija na voljo. Ogled na lokaciji možen. Predvidoma na voljo od novembra 2025. Nwodpfexddagsx Adysb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 15.996 h, skupna masa: 6.750 kg, vhodna napetost: 400 V, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Nwsdpfx Astwliwodyeb Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Model: Amada HFE M2 220t 4m, 8-osna hidravlična upogibna stiskalnica Letnik: 2012 Tonska moč: 220 ton Največja dolžina upogiba: 4280 mm Dolžina hoda: 200 mm Hitrost približevanja: 1 – 100 mm/s Hitrost upogibanja: 1 – 10 mm/s Hitrost vračanja: 1 – 100 mm/s Kapaciteta olja: 195 l Moč motorja: Nodev S U Izjpfx Adyowb Teža: 17.450 kg Dimenzije: Dolžina stroja: 5070 mm Globina stroja: 2075 mm Višina stroja: 3085 mm Razdalja med stranskima okvirjema: 3760 mm Širina prečke: 180 mm Višina mize: 960 mm Odprtina (svetel odprt): 470 mm Globina grla: 420 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Control system: ELB PLC Grinding area: Length X 1000 mm Width Z 750 mm Height Y 400 mm Magnetic chuck 1000 x 700 mm Table load capacity (without magnetic plate): 1100 kg Longitudinal axis X: Table speed 2–26 m/min Maximum longitudinal stroke 1100 mm Vertical axis Y: Vertical stroke 400 mm Maximum feed speed 1200 mm/min Minimum vertical infeed 0.001 mm Cross axis Z: Maximum cross stroke 620 mm Maximum feed speed 2000 mm/min Minimum cross infeed 0.001 mm Grinding spindle: Taper 75 mm Drive 22 kW Speed range 1450 rpm Grinding wheel dimensions: 450 x 150 x 203.2 mm Nodpfx Asvwl Ipodyjwb Machine footprint (without control panel) LxWxH: 3550 x 2750 x 3230 mm Total machine weight: 7300 kg