Univerzalni obdelovalni center

DMG MORI ecoMill 50

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Kwsdpfxoxmhdno Aacju Operated in single-shift mode only. Further information available on request.

Stanje: dober (rabljeno), Leto izdelave: 2009, Ref. No.: 10556 Manufacturer: DMG MORI Model: DMC 60 FD Year of manufacture: 2009 Control type: CNC Control system: Siemens 840DSL-721 Location: Halberstadt Country of origin: Germany X travel: 630 mm Y travel: 800 mm Z travel: 850 mm Max. workpiece diameter: 600 mm Max. workpiece weight: 400 kg Spindle speed: 12,000 rpm Tool changer: 60 positions Max. workpiece height: 500 mm Machine weight approx.: 10 t Number of pallets: 2 Motor spindle: 24,000 rpm Additional information: - Internal cooling - B-axis swivel range -5/ +110° - Cooled table console, table bearings, and motors - Cooled bearing blocks and spindle nuts on the ball screws - Cooled guides in the linear axes X/Y/Z - Drive power: 100%ED/40%ED 24 kW/35 kW - Chip conveyor - Internal coolant supply - Electronic handwheel - Rotary table with turning function - Operating mode 4 - 2 pallets, ø 630 mm - Pallet rotary changer - ICS 40 bar, 980 liters, paper band filter - Dsc Htetzywvjlwwxokp - Heidenhain probe - 3D Quickset The machine can be inspected under power by arrangement. Kwsdpjxc Tt Tefx Aaceu

Stanje: dober (rabljeno), Leto izdelave: 2006, Technical data Ø: 400 to 1000 mm Kwsdpfxov Tztys Aacju Rectangular: 100 x 400 mm to 1000 x 1100 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 7.000 kg, Ta stroj je konfiguriran s 4 popolnoma elektronskimi CNC osmi in ima integrirano programsko opremo, ki generira samodejni program. Opis: Kwsdpfx Aewvbqieacju Največji premer zobnika: 400 mm Širina zobnika: 76 mm Hod: 82 mm Obrati: 150 - 700 obr/min Modul: min. 0,5 mm Modul: maks. 6 mm Teža stroja: približno 7500 kg Električna oprema: – Obratovalna napetost: 380/400 V – Zaščita: 20kVA Stroj z novim CNC Siemens 808D Siemens pogoni in servomotorji Nova nadgradnja 2025 Zasloni za samodejno generiranje programov Samodejni cikli NR12 Vključen je: Transporter odrezkov Rezervoar za hlajenje Samodejno mazanje Digitalni nadzor tlaka Hidrostatično vodilo

Stanje: rabljeno, Tool presetting device EZSET EZ400 Kodpsuhb Stsfx Aacswu

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Coolant system Technical data: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Kjdsrairwopfx Aacjwu Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Technical data, accessories and machine description are non-binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, skupna višina: 2.777 mm, potovalna razdalja osi X: 700 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 660 mm, skupna masa: 1.265 kg, število osi: 3, This 3-axis Hexagon GLOBAL CLASSIC was manufactured in 2019. This CMM device is ideal for precise measurements and provides a reliable solution for enhancing quality control processes. Take advantage of the opportunity to purchase this Hexagon GLOBAL CLASSIC CMM. Contact us for further information. Additional Equipment • Compressed air supply: Min. air pressure: 0.5 MPa / Max. air consumption: 70 NI/min / Minimum supply pressure: 0.5 MPa (5 bar) / Minimum inlet flow (ANR) UNI ISO 8778: 7.5 dm³/s • Compressed air quality: Maximum oil concentration in air: 5 mg/m³ / Maximum solid particle size in compressed air: < 0.04 mm / Maximum particle concentration in compressed air: 3(*) • Dynamic performance: 3D positioning speed: 510 mm/s / Max. acceleration: 1700 mm/s² / Resolution: 0.039 µm Machine Advantages Technical advantages of the machine: • Maximum workpiece weight: 900 kg Main system: • Dell Precision Tower 5820 workstation • Pre-installed PC-DMIS 2019 metrology software Probe / Sensor system: • HP-S-X1S scanning sensor • HR-X1S automatic probe changer with 6 slots Calibration and fixturing equipment: • Standard calibration artifact • Swift-Fix kit with silver base plate (400 × 600 × 12 mm) Accessories (Standard probe set – HP-S-X1S): • 1× probe stylus Ø 1.5 mm, 20 mm length • 1× probe stylus Ø 3 mm, 20 mm length • 1× probe stylus Ø 5 mm, 20 mm length • 1× probe stylus Ø 3 mm, 50 mm length • 1× probe stylus Ø 5 mm, 50 mm length • 1× probe stylus Ø 5 mm, 100 mm length • 1× wrench • 2× spring pins • 1× storage case Kwsdex D Em Uepfx Aacju Dimensions Machine depth 1277 mm

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot Kwsdpfx Aaeu A Dn Nocsu - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, CNC SMOOTH G, hodi 730 x 730 x 730 mm, 2 paleti 500 x 500 mm, hitrost vretena 18000 obr/min, magazin za 120 orodij, max. premer kosa 800 x 1000 mm, hitri pomiki 60 m/min, centralno hlajenje 15 barov, priprava za RENISHAW, rotacijska miza CNC s 360 pozicijami, transporter CONCEP. Kwjdjxcvycopfx Aacou

Stanje: zelo dobro (rabljeno), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight: approx. 12.5 t Kwsdewgizdopfx Aacou Space requirement: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by specialist company. The existing milling head has been replaced by an overhauled universal milling head. Equipment: Differential for angled machining Automatic indexing device (interchangeable index plates!) for splined and multi-start components; also extensive set of bushings, support rollers and around 70 change gears. Conversion of milling head speed control to frequency inverter with corresponding high-performance motor is a great advantage and saves much setup time. Accessories: Around 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller supports, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.