Vertikalni obdelovalni center

DMG Mori Seiki DMU 50 ecoline

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Fsdsx Hgl Hjpfx Ahmjgc With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 31.000 h, Funkcionalnost: popolnoma funkcionalen, CNC sliding headstock automatic lathe Manufacturer: STAR Model: SV-38R Year of manufacture: 2014 Equipped with: FANUC 31i-B control, Synchronised spindle, Backworking capability, Driven tools, Turret with B, Y, X, and Z axes, 2x C-axis, Fsdpfx Aheytq Ahemjgc Y2-axis, High-pressure pump, Oil mist extraction system, Parts conveyor, Chip conveyor, Fire extinguishing system, Can be used as short or long turning machine Bar loader magazine FMB Turbo 5-55

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current standards. Technical Data: - Heidenhain TNC 320 retrofit - Travel axes: X - 500 mm, Y - 380 mm, Z - 350 mm - Spindle taper: SK 40 - Vertical quill stroke: 50 mm - Spindle speed range: 20–3,150 rpm, stepless - Feed rate: 1–3,000 mm/min - Rapid traverse: 5 m/min - Table load capacity: 250 kg - Total power requirement: 11.3 kW - Machine weight: approx. 2 t - Handheld control unit - Safety enclosure Inspection and test run under power on-site are of course possible. We are also happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: Fgjdpsxw N S Isfx Ahmsc - Service - Maintenance - Overhauling - Automation of DMG machines and other renowned manufacturers. We are your partner! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us throughout the entire process.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 53.776 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 380 mm, premer vrtljive mize: 500 mm, največja hitrost vrtenja: 18.000 obr/min, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping table diameter: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Fgedpfx Aowxd Agehmec Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be organized throughout Europe at an additional cost, if required. Prices are plus VAT. Viewing by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your machine? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 35 t, delovna širina: 2.000 mm, Pressure: 35 tons Fgsdpfx Ahjwagyksmsc Max. bending length: 2000 mm Backgauge Drive power: 4.5 kW Weight: 3000 kg

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm - Machine height: 1666 mm - Machine weight: 1700 kg Fsdpeuha Umsfx Ahmjgc ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Stanje: generalkompletno obnovljen (rabljeno), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measurement uncertainty 4.0 + 4.5L/1000 (in original condition, currently significantly improved after modernization) Fully modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Completely new software: Inca Premium (other software options available upon request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Fsdpfxodpak Re Ahmsgc Probe changer Rotary table, etc.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 794 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 520 mm, pomik po osi Z: 475 mm, model krmilnika: Siemens, skupna masa: 7.750 kg, največja hitrost vretena: 20.000 obr/min, število mest v zalogovniku orodij: 60, Nudimo DMG DMU 50 v odličnem stanju, z le 794 urami delovanja. Stroj bo na zalogi prihodnji teden. Stroj ima naslednje opcije: - Siemens 840D SL - Hitrovreteno Speedmaster 20.000 vrt/min, 35 kW / 25 kW, navor 130 Nm / 86 Nm, SK40 - Avtomatski menjalec orodij za 60 orodij - Transporter za odrezke - Zasučna miza 630 x 500 mm - Notranje hlajenje 20 bar - Zunanje zračno hlajenje - Zračno vreteno Fgodozb Em Rspfx Ahmsc - Rotacijsko okno za jasen pogled - Pršilna pištola - Separator oljne in emulzijske megle - Sonda Heidenhain TS460 - Naprava za merjenje orodja Heidenhain TT160 - 3D quick set - Elektronsko ročno kolo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 67 h, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.300 obr/min, potovalna razdalja osi X: 615 mm, pomik osi Y: 260 mm, pomik po osi Z: 1.585 mm, skupna masa: 16.600 kg, proizvajalec krmilnikov: MAZATROL, število osi: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine is equipped with a robust tool magazine holding 72 positions and includes both a main and a second spindle to expand its capabilities. If you are looking for high-quality turning and milling functions, you should consider the Mazak INTEGREX i-200 S turning-milling center. Contact us for further details. • Operating time: approx. 68 hours • Availability: Immediate • Key Features: • Full simultaneous 5-axis machining • Main spindle + sub spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and work area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (sub spindle): Ø65 mm • Maximum support weight (main spindle): 650 kg • Maximum support weight (sub spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blower system: Included • Additional equipment: Heavy-duty spindle HD1; removal of standard spindle cylinder and chuck • Sub spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travel • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: tool breakage detection in magazine; overload detection • CNC functions and software • 5-axis machining package • 5-axis tool radius compensation • Cylindrical interpolation • Polar coordinate interpolation • Synchronous thread cutting with milling spindle • Cooling and preparation • Coolant through spindle: 7 MPa • Prepared for mist extraction system • Highlights • Practically new condition with only approx. 68 hours operating time • Very extensive factory configuration • Full simultaneous 5-axis machining • Main and sub spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings compared to new Additional Equipment Fgodsy Sltgjpfx Ahmec • Chip and parts handling • Side chip conveyor - Consep type • Belt conveyor for parts • Bar loading and workpiece handling • LNS QLS II bar loader • Interface kit for bar loader • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Other accessories • Mounting anchors for the machine • 3-color machine status signal light Technical Specification

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Fedpfexf Hqqjx Ahmsgc Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)