Stroj za oblikovanje

DISA Disamatic 2032 A

DISAMATIC 2032 A
Serial Number: 75.1019
Year of manufacture: 1975
Dimensions:
DISAMATIC 2032 A: 8011 x 1600 x 2950 mm (length x width x height)
Control room: 2400 x 1900 x 2300 mm (length x width x height)
Weight:
Ihedpfx Asvyc T Usdksw
Approx. 32 t (without hydraulic oil)

Mould dimensions:
Height: 600 mm
Width: 775 mm
Thickness: min. 150 mm / max. 400 mm
The thickness of moulds depends on chamber depth, moulding pressure, moulding boards, sand shooting pressure, and characteristics of the moulding sand.

Mould surface pressure:
Adjustable between 0 and 22 kp/cm²

Performance:
300 moulds per hour (coreless / mould thickness 200 mm)
Current efficiency: 150 moulds per hour

Maximum casting unit weight:
Approx. 40 kg net

Moulding sand consumption:
Max. 85 m³ per hour

Air consumption:
Max. 14 m³ per minute

Air pressure:
Min. 6 kp/cm²
Max. 10 kp/cm²

Electrical system:
Power requirement: 59.5 kW
1) Main motor - 37 kW
2) Servo motor – 7.5 kW
3) Heating elements – 13 kW
4) Control system – 2 kW
Control voltage: 110V AC

MOULDING CHAMBER DIMENSIONS
Top Plate #: 774.8 x 710 x 30 mm
Right Side Plate #: 810 x 710 x 30 mm
Left Side Plate #: 810 x 710 x 30 mm
Bottom Plate #: hard-chromed on one side, 2311 x 774.8 x 8 mm

System PMC - Capping Strips PMC
Dimensions:
Width: 775 mm
Length: 18 m
Weight: approx. 8 t
Air consumption:
Average: 0.5 m³/min
Max.: 2.5 m³/min

-----
No CSE – “QUICK CORE MASK CHANGE”
No QPC – “QUICK PATTERN PLATE CHANGING UNIT”
-----

The DISAMATIC 2032 A moulding machine is integrated with a BBC XCQ 44 pouring furnace with a 4.4 t capacity. The induction furnace is equipped with a heated inductor (max. power 120 kW) and a bottom-pour stopper.

The moulding line is connected to a knockout grid.

We are prepared to sell the entire moulding line, including additional accessories.

Machines are in good condition, mechanically and electrically fully operational.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.