Ročni laserski varilec 1500 Watt

Diodela FWS-1500-AS

Stanje: rabljeno, Leto izdelave: 2004, Used APV Anhydro PSD 52 stainless steel (AISI 316) spray dryer. Maximum drying capacity of water evaporation: 9.3 kg/h at a maximum air temperature of 350°C. The drying chamber has a diameter of approx. 1000 mm, straight side height of 700 mm, and a conical bottom height of 1100 mm. Includes (1) rotary atomizer CMT model AF07 powered by an IBAG motor with 0.7 kW output, wheel diameter 63 mm, speed range 10,000–60,000 rpm. Also equipped with a 12 kW electric air heater, cyclone with container for dry product, fan, and main switchboard with integrated control panel. Hsdpfx Aouk Ehxof Tsfb

Stanje: pripravljen za uporabo (rabljen), Sertom brand hydraulic plate rolling machine, length 25,000 mm with loading feed, 2 lower rolls of 300 mm, upper roll of 318 mm, plate thickness capacity 14 mm. 22 kW for rotation, 5.5 kW for movements, 2.5 kW for support structure. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Hedpfjnr Npysx Af Tofb

Stanje: novo, Leto izdelave: 2023, Suhi, z epoksidom zalit trifazni distribucijski transformator, proizvajalec TESAR Italija, 1 kos 1000kVA; 6000 (± 2 x 2,5 %) /400V; Dyn1, IP00, leto izdelave 2023, izgube po ecodesign 2, projektna dokumentacija in posamezni protokol, navodila, nerazpakiran, 2 leti garancije. Hfedpfol Tm Uvex Af Tsb

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw Hedsfgyicepfx Af Tjfb 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2025, Certificirano po DGUV do: 12/2026, skupna masa: 25 kg, vhodna frekvenca: 50 Hz, lastna masa: 25 kg, Agitator Shaft for Rego Hjdpfx Aodlxgtsf Tefb Bakery Machine Suitable for Rego Beating Machine / Planetary Mixer SM model sizes 2, 3, and 4 in stock Shaft fully overhauled + spare parts service We maintain a large spare parts inventory for you! Visit our extensive showroom with numerous bakery machines.

Stanje: rabljeno, Dolžina upogibanja: 3100 mm Tlak: 80 t Moč motorja: 5,5 kW Mehanska zadnja opora Hjdpfx Aoru Unbsf Tefb

Stanje: rabljeno, Table size 900 x 460 mm X/Y/Z travel – 600/400/420 mm Spindle speed 20–4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Tool changer with 32 stations Quill movement in vertical head 75 mm Swivelling vertical head +/- 90° Control: Heidenhain TNC 407 Equipped with: Machine vice Hfsdpfx Afsl Dvx Eo Teb 19 tool holders Coolant system

Stanje: novo, Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Tapping capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle speeds for threading: 200 - 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Hfodpfxob Eldno Af Teb Weight: 80 kg Three-phase motor, frequency-controlled: 1.1 kW With full-featured tapping device and programmable digital display Machine in stock and immediately available

Stanje: zelo dobro (rabljeno), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive graphical user interface (GUI) operating on Microsoft Windows XP Professional. Instrument configuration includes the following features: Hsdpjmn Rcqjfx Af Tofb - Magnification range: 5x - 300,000x - Accelerating voltage: 0.3 - 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large fully motorized specimen stage with eccentric tilt, including: - Graphical navigation on the specimen holder - Easy sample navigation via click-center-zoom - Field-of-view controlled navigation using two navigators - Relative coordinate navigation - Save and recall sample positions - Adjustable specimen stage field-of-view process - Field-of-view correction during rotation via computer-controlled eccentric rotation - Field-of-view correction during tilting via computer-controlled eccentric tilt - Calculation of possible tilt angle based on sample geometry - Automatic focus tracking when moving the sample in the Z-direction - Intelligent limit switches for the motorized axes Specimen stage travel range: - x = 125 mm - y = 100 mm - z = 5 to 80 mm (stepless) - T = -10°C to +90°C - R = 360° (continuous) - Secondary electron detector for high vacuum operation - Innovative superconical objective lens to ensure highest image resolution even at high tilt angles - Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV - Simultaneous live image display from multiple detectors - Easy sample navigation via click-center-zoom - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile sample chamber with various expansion options: free flanges (e.g., for EDX, WDX, EBSD, cathodoluminescence, etc.) - Maintenance- and wear-free, quiet pumping system consisting of forepump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Extensive fault protection to prevent operator error and external media failure - Ergonomic, height-adjustable system table - SEM starter kit including 2 sample holders, tool kit, and 6 spare cathodes Additional equipment for scanning electron microscope: - Turbomolecular pump instead of standard diffusion pump - When using a turbomolecular pump, no cooling water is required for SEM operation. Additional SEM equipment: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software license will be transferred to the new owner upon purchase! - Nitrogen-free, energy-dispersive X-ray analysis system including: - SDD detector with 127 eV or better energy resolution - Detection of all elements from boron upwards - Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standards-free element analysis - Image acquisition - Ultra-fast qualitative line scan - Ultra-fast qualitative element mapping - Data management and archiving system - Report generation and results output - Data communication - Installation and instruction - HyperMap - Multipoint analysis - Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (See photos) Condition: used (Subject to change and errors in the technical data and specifications!)

Stanje: dober (rabljeno), Leto izdelave: 2000, Manufacturer: KUKA Model: KR 350/2 Year of manufacture: 2000 Net weight: 1,870 kg Hfedpfx Ajh Dwr Uef Tob Without cables and control cabinet. Supplement to the measurement report!