Krmilna enota

Dietz FDR 132 M/4q Motor SN:3070557 mit FD 71/25q

Stanje: zelo dobro (rabljeno), Schneider SH 07 Vacuum Dissolver Explosion-proof design with wall scraper Drive power: 13 kW Wall scraper power: 2.5 kW Speed range: 380–2000 rpm Mixing vessel: stainless steel, double jacket, 2 x 100 L net capacity, Klsdpfx Afeimgqme Nsl 50 L heating chamber volume Mixing vessel: stainless steel, 1 x 200 L Very good condition, directly from production!

Stanje: rabljeno, številka stroja/vozila: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3-blade rotor 2 rows of stator knives Feed opening approx. 300 x 280 mm Drive motor 11 kW With soundproof enclosure, soundproof hopper, and extraction fan Kedpfx Afjghgq Ns Nell

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3 m/min Crab travelling speeds 20/5 m/min FEM group 2M Operating voltage 400V Kjdpfxevx E I Se Af Nsll Control voltage 230V Flange width 300mm Multiple units immediately available from stock

Leto izdelave: 1994, Stanje: dober (rabljeno), Rivo bandsaw sharpening machine Model GA 250 Klodspl D Hxjpfx Af Nol

Stanje: dober (rabljeno), Renault 270 DCI crane truck, 19 tonnes, Year: 2002, 470,000 km. Engine replaced with factory exchange unit at 250,000 km. Crane capacity: 5.5 tonnes. Technical inspection: passed. No remote control for the crane. Kjdpsrhzy Hefx Af Nsll

Leto izdelave: 1990, Stanje: dober (rabljeno), Used side loader Kalmar, The machine has been well maintained. Kljdpsh Et E Nefx Af Nol For further details, please refer to the pictures.

Leto izdelave: 2010, Stanje: dober (rabljeno), 2 SICON shredders Year: 2010 Electrical cabinet is missing Price: €15,000 each Kledpfxjiz Tm Ij Af Nsl 4 densimetric tables: €8,000 each

Stanje: skoraj kot novo (rabljeno), Manufacturer: Flender Model: K2S-2,5 Backstop: Yes Power: 78 kW Gear Ratio: 44.16:1 Input/Output Speed: 1,400 / 31.7 rpm Input Shaft Diameter: 65 mm Kedpfx Afog Stz Aj Njll Output Shaft Diameter: 140 mm

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Kedpfxjw Sy T Hj Af Noll Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: rabljeno, Funkcionalnost: nepreverjeno, izvrtina vretena: 81 mm, premer struženja nad ležiščem sani: 650 mm, višina središča: 320 mm, stružna dolžina: 1.500 mm, Used lathe, see pictures. Equipped with Sony digital display and 660 mm faceplate. Year of manufacture: 1976 Kjdpfx Afjwm Rvij Noll All technical specifications are shown in the last image. ATTENTION: According to the nameplate, the model is XD500, but based on dimensions and delivery note, it is actually an XD630. Centre distance: 1500 mm Bed length: 2500 mm Centre height: 320 mm Includes taper turning attachment and side ruler.