Sistem žerjava

DEMAG

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.000 kg, skupna dolžina: 7.860 mm, skupna širina: 2.900 mm, nosilnost: 5.000 kg, glavna hitrost dviga: 5.000 mm/min, TEHNIČNI PODATKI Oznaka dvižnega mehanizma: P 35 Hitrost dviga: 5 m/min FEM skupina: 1Cm Nosilnost: 5 t Vrvi/veriga: 16 mm Mera Y/W 1: 111 mm Ppsdpfx Asyf Av Doczsl PODROBNOSTI STROJA Mere in teža Mere (D x Š x V): 7.860 x 2.900 x 1.000 mm Lastna teža: 5.000 kg OPREMA Brezžični daljinski upravljalnik Preizkusna knjiga priložena Opomba: Žerjavne proge niso vključene v obseg prodaje in dobave.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HEGLA, KPL-MZ-III, 36 Compact glass storage system Year of manufacture: 2014. Load capacity: 180 t Psdpev Iqtxofx Aczjpl Maximum glass size: 3210 x 6000 mm, 36 compartments. In very good technical condition. Inspection possible by appointment. Available: IMMEDIATELY

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 28.646 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It offers a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine features a linear robot system and a 9-zone hot runner mold temperature control unit. Take this opportunity to purchase the DEMAG El Exis S250/630-2300 electric injection molding machine. Contact us for further information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar distance (H x V): 630 x 630 mm • Platen size: 950 x 950 mm • Minimum/maximum mold installation height: 330 mm / 830 mm • Maximum daylight (open space): 1505 mm • Opening stroke: 675 mm • Ejector stroke/force: 200 mm / 80 kN • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating capacity: 14.8 kW • Hybrid drive power consumption: Pedpfoyftamex Aczopl • Installed total power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW • Options/controls • Core pulls: 2x (moving side) • Needle shut-off control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9-zone hot runner integrated • Interfaces: printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle time: 2.00 s • Noise level: 74 dB(A) • Owner’s note • Describes a hybrid high-speed machine equipped with a larger injection unit (Type 2300 vs. Type 840) than the above-mentioned stock machine. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN Ppsdpeyfq Alofx Aczel • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), številka stroja/vozila: MBUT136, ! Bargain Price ! Price starting from €1,150 R.Stahl Single-Girder Suspension Crane / Bridge Crane / Crane Runway / Workshop Crane / Gantry Crane Safe Working Load: 250 kg 7 cranes available: 4: Steel Suspension Crane SWL 250 kg, width 6.35 m, gauge 5.6 m 5: Steel Suspension Crane SWL 250 kg, width 2.65 m, gauge 1.9 m 6: Steel Suspension Crane SWL 250 kg, width 4.85 m, gauge 4.35 m 7: Steel Suspension Crane SWL 250 kg, width 2.90 m, gauge 2.35 m 9: Steel Suspension Crane SWL 250 kg, width 6.0 m, gauge 5.5 m 10: Steel Suspension Crane SWL 250 kg, width 1.03 m, gauge 0.74 m (€1,150) 11: Steel Suspension Crane SWL 250 kg, width 1.65 m, gauge 1.25 m Gauge can be modified, end carriages are fastened with 8 bolts. Runway beams (IPE 200 – not included) Trolleys are adjustable to fit beam dimensions. Includes complete control equipment and pendant controller. All cranes have full electric travel on all three axes. Lift height/hook travel approx. 4 m Power supply: 400V, 16A, year of manufacture: 2003 Very good condition, systems were solely used for maintenance purposes – hardly used. Shipping by freight forwarder, collection preferred. Location: 75053 Gondelsheim Podpfx Acsigl R Rszepl For shipping rates by postal code, please inquire. We will provide you with a prompt and non-binding offer!

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 1.500 mm, Oprema: dokumentacija / priročnik, Število osi: 3 Doseg: 1500 mm Nosilnost: 5 kg Ppedpoyfhw Hjfx Aczel X=420 mm Y=1200 mm Z=1500 mm

Stanje: dober (rabljeno), Leto izdelave: 1975, Crane trolley, manufacturer: DEMAG, type: PL 168 NF, year of manufacture: 1975. Load capacity: 3,200 kg, lifting height: 4 m. Equipped with pendant control. In good condition. Ppodpfxsubbr Ts Aczjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, For sale: Glaston UC 1000 glass cutting table. The machine is in very good technical condition, has been regularly serviced, and is ready for operation. Ideal for precise cutting of glass of various thicknesses. Ppodpfeur U Tyox Aczjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, nosilnost: 2.000 kg, Mostovno dvigalo DEMAG - M + PK10-N-F Pedpfxoyfd N So Aczjpl MACH-ID: 9360 Proizvajalec: DEMAG Tip: M + PK10-N-F Leto izdelave: 1991 Motoriziran vrtljivi doseg 0° - 270° Nosilnost 2000 kg Visoka hitrost 4000 mm/min Nizka hitrost 10000 mm/min Priložene knjige / pregledne knjige Prosimo, upoštevajte: Informacije na tej strani smo zbrali po najboljšem vedenju, kjer je bilo mogoče tudi od proizvajalca. Podatki so podani v dobri veri, vendar za točnost ne moremo jamčiti. Tako te informacije ne predstavljajo zavezujoče ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Pedpfx Acorgw Exjzjpl Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 158 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GG6TKB-21932, skupna širina: 4.201 mm, skupna dolžina: 7.151 mm, skupna masa: 2.250 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina podajanja os X: 6.100 mm, dolžina pomika po osi Y: 3.355 mm, pritisk: 8 letvica, dolžina rezanja (maks.): 6.100 mm, Stroj za nalaganje, rezanje in lomljenje enoslojnih steklenih plošč z manj kot 158 delovnimi urami! Naprava za samodejno zaznavanje debeline stekla omogoča samodejno nastavitev parametrov stroja. Jumbo plošče: 6100x3355 mm maks., debelina 2–19 mm. Ppedpfownww Nsx Aczol

Leto izdelave: 2019, obratovalne ure: 18.138 h, Stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Dodatne informacije Pedpex D Nxzjfx Aczjpl • Premer polža: 50 mm • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 12.396 h, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Ta DEMAG Ergotech 4200-2300 je bila izdelana leta 1998. Gre za hidravlični brizgalni stroj z zapiralno silo 4200 kN in vključenim Wittmann robotom. Razmislite o priložnosti za nakup tega hidravličnega brizgalnega stroja DEMAG Ergotech 4200-2300. Kontaktirajte nas za dodatne informacije. Ppedjx D Hyvepfx Aczol • Wittmann vključen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machine condition is excellent, having completed only 123,000 cycles. CNC-controlled automatic machine designed for processing welded frames. Independent drive and control system. Multiple operations performed within the same cycle time Operates in conjunction with a welding and cleaning line Does not require additional shop floor space Can be adapted for operation in a sash line All processing operations are performed during the cooling phase: Psdpfx Ajm Ak R Ueczepl - Drainage - Ventilation grooves - Ventilation bores in colored profiles - Drilling of frame for mullion connector - Hinge drillings in the frame (x6) The center is equipped with its own transfer system for moving frames from the welder to the cleaner SPS, NC control User-friendly visualization interface

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Pjdpfx Asyctgbsczjpl Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request