KBK vrtljiva plošča

Demag

Leto izdelave: 1992, Stanje: dober (rabljeno), Kompresorska postaja sestavljena iz: Vijačni kompresor Proizvajalec: MANNESMANN DEMAG Tip: 085 Rallye Leto izdelave: 1992 Zmogljivost: 7,9 m³ /min 3.000 obr/min 45 kW Digitalni prikazovalnik Vijačni kompresor Proizvajalec: MANNESMANN DEMAG Tip: 085 Rallye Leto izdelave: 1992 Zmogljivost: 7,9 m³ /min Tlak: 75 bar 3.000 obr/min 45 kW Hladilni sušilnik stisnjenega zraka Proizvajalec: MANNESMANN DEMAG Tip: AD160AB Leto izdelave: 1993 Separator olje-voda Tip: ÖWAMAT 6 Rezervoar za stisnjen zrak Proizvajalec: LOHENNER Kljdpfx Afjri I Rre Nel Tip: ZU47/21 Prostornina: 5.000 l Izvedba: stoječa Leto izdelave: 1993 Nadtlak: 11 bar

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 52 h, nosilnost: 200 kg, dvižna višina: 10.000 mm, lastna masa: 2.680 kg, gradbena višina: 1.990 mm, vrsta goriva: električni, skupna dolžina: 2.800 mm, vrsta pogona: Elektro, gradbena širina: 1.000 mm, delovna višina: 10.000 mm, Navpično dvižno dvigalo Kljdevymbijpfx Af Nsl Velikost prednjih pnevmatik: 16x5 Velikost zadnjih pnevmatik: 16x5 Napetost baterije: 24V Kapaciteta baterije: 250Ah Proizvajalec baterije: Haulotte Polnilec št. ST413

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis Kjdpfx Aex D Rqrsf Nell • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Klodpjx D Nwqofx Af Nsl Machine depth: 6,600 mm

Stanje: novo, JAN REILING BV has an extensive inventory with over 15,000 different DEMAG parts, ranging from nuts to complete cranes. In addition to new parts, we also supply used parts, hoists, and cranes. Our refurbished hoists, cranes, parts, and drives are available in fully overhauled condition from our warehouse. JAN REILING BV delivers exactly what you're looking for without delay. JAN REILING BV has built up an extensive supplier network across Europe. In addition to DEMAG, we can quickly and cost-effectively supply you with parts for all other brands as well. Kjdpfx Afsh Upx Is Nell We offer a wide range of new Demag parts from stock, including: rope guides, hoist ropes, brake linings, rope pulleys, hoist motors, trolley motors, fine lift motors, bottom blocks, load hooks, travel wheels, pinions, radio controls, bottom hooks, cable drums, trolleys, motors, travel motors, ropes, chains, and more. KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P00DH P10 P1250 P1201 DMR DR DC PK DK Contact us to discuss the available options. We supply both new and used equipment.

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Kledpfx Afoyark Te Nol Razdalja med stebri (V): 580 mm Razdalja med stebri (H): 580 mm Tip: Horizontalen Pogon: Hidravlični

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 160 t Kjdeyarfdspfx Af Njll Premer vijaka: 40 mm Razdalja med stebri V: 520 mm Razdalja med stebri H: 520 mm Tip: Horizontalen Pogon: Hidravlični

Leto izdelave: 2016, Stanje: kot nova (razstavni stroj), številka stroja/vozila: KBK FFM, DEMAG KBK 2 - Overhead Crane Track Indoor Crane The images show a sample crane runway with the components listed below. These are also available individually! Kledpfemmbn Tjx Af Nel Please inquire about your crane runway according to your required dimensions. Safe working load / lifting capacity from 80, 125, 250, 500 up to 1000 kg KBK 2-R switches left and right (with conductor line) KBK 2-R swivel discs 890mm (with conductor line) KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with conductor line) KBK 2-R rails (with conductor line) The system can be delivered complete according to your requirements. Rails, rail connectors, trolleys, end plates, cable carriers, brackets/hangers, accessories are available. Chain hoists available on request. Very good, almost like-new condition Shipping by freight carrier possible Demag KBK1, KBK2, and KBK3 rails are in stock!

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. Klsdjxcbnljpfx Af Nol 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Omrežna priključitev: 380 V, 50 Hz Teža: 20 kg dobro stanje

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Serial number: 86584 Front tire condition: 70% Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Please contact PFEIFER GROUP for further information. Kjdpfowwqbyjx Af Nell

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 64 h, nosilnost: 200 kg, lastna masa: 2.680 kg, gradbena višina: 1.990 mm, vrsta goriva: električni, skupna dolžina: 1.650 mm, vrsta pogona: Elektro, gradbena širina: 1.000 mm, delovna višina: 9.950 mm, Navpična dvižna ploščad Velikost sprednjih pnevmatik: 16x5 Kledpewkbgmjfx Af Nel Velikost zadnjih pnevmatik: 16x5 Napetost baterije: 24V Kapaciteta baterije: 250Ah Letnik baterije: 2024

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Zapiralna sila: 280 t Premer polža: 45 mm Teža brizga: 294 g Razdalja med stebri (V): 630 mm Razdalja med stebri (H): 630 mm Prostornina brizga: 323 cm3 Tip: Horizontalen Pogon: Hidravlični Kljdpoxykw Rjfx Af Njl

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Ksdpfxewk Aw Ho Af Noll Please contact PFEIFER GROUP for further information.

Leto izdelave: 2020, Stanje: novo, Prodamo nov ležaj TIMKEN HH 840249 005-U/2 VP, še zapakiran v kartonski škatli. Kedol Axp Djpfx Af Njll

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, DEMAG DVOJNOSEŽNI MOSTNI ŽERJAVI, LETO 1998, Z DVIŽNIM MEHANIZMOM. DOLŽINA NOSILCA: 28.200 mm. VIŠINA POD NOSILCEM: 11 METROV. DELOVNI. DOKUMENTACIJA IN VZDRŽEVALNA DOSJEJA NA VOLJO. Kljdpfxeyb Tt Sj Af Njl