Drobna poteza FG24 16/5P4

Demag

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. Kodpfxox D Rqrs Af Tjdg • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: dober (rabljeno), Overhead crane, crane, trolley, crane end carriage, crane travel unit, end carriage, end carriage for bridge cranes, underslung crane end carriage, end carriage for single-girder bridge crane Kedpfx Afsdc Ipmj Tjdg -Friction wheel Demag type: RF180 -Beam width: 120 mm -Safe working load: 2,000 kg -Quantity: 2 travel units available -Price: complete -Dimensions: 2550/320/H350 mm -Dead weight: 500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard Kjdpfx Ajx D Nwqjf Tsdg • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine depth: 6,600 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Razdalja med stebri (V): 580 mm Razdalja med stebri (H): 580 mm Tip: Horizontalen Kdedjyark Tspfx Af Tog Pogon: Hidravlični

Leto izdelave: 1989, Stanje: nepreverjeno (rabljeno), The crane has been dismantled. Inspection book available. Kdjdpfef Sfxqsx Af Teg

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 160 t Premer vijaka: 40 mm Razdalja med stebri V: 520 mm Razdalja med stebri H: 520 mm Tip: Horizontalen Pogon: Hidravlični Kdedpfxjyarfdj Af Teg

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Kdsdsxcbnlopfx Af Tjg Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Omrežna priključitev: 380 V, 50 Hz Teža: 20 kg dobro stanje

Stanje: dober (rabljeno), Overhead crane, crane, trolley, crane travelling gear, crane carriage, end carriage for bridge cranes, overhead crane end carriage, single-girder bridge crane end carriage - Handover in as-is condition as inspected - 1x wheel missing (see photos) - Friction wheel Demag type: 13/8RF8-2 - Beam width: 120 mm - For narrow flange beams: IPE240 (120 mm wide) - The carriages are inserted into a steel beam - Load capacity: 2000 kg - Quantity: 2 carriages available - Price: complete (for both) - Dimensions: 2550/320/H350 mm - Own weight: 500 kg Kodpsdc Iplefx Af Todg

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Kodewwqbyspfx Af Todg Serial number: 86584 Front tire condition: 70% Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Zapiralna sila: 280 t Premer polža: 45 mm Teža brizga: 294 g Razdalja med stebri (V): 630 mm Razdalja med stebri (H): 630 mm Kodpfx Afjxykw Rs Todg Prostornina brizga: 323 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Kodpfx Afjwk Aw Ho Todg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, Leto izdelave: 1988, Outreach 2,200 mm Hook height 2,600 mm Machine weight approx. 1.8 t Load capacity 1,000 kg +++++ Please note that the machine is in a disassembled and load-ready condition. For this reason, a powered demonstration or the recording of a video is not possible. Furthermore, our listing contains the most informative and highest quality photos available. Unfortunately, it is not possible to send additional pictures. Kdsdpfxsg N Di Re Af Tog +++++

Stanje: rabljeno, Ročna krmilna enota DEMAG za dvoranski žerjav. Stroški pošiljanja 20 evrov. +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videa nista mogoča. Kodpfxjh Hvgxe Af Tedg Poleg tega naša oglas vsebuje najbolj informativne fotografije najboljše možne kvalitete. Pošiljanje dodatnih slik žal ni mogoče. +++++