Pesto motorja 28/12K4P

Demag

Leto izdelave: 1992, Stanje: dober (rabljeno), Kompresorska postaja sestavljena iz: Vijačni kompresor Proizvajalec: MANNESMANN DEMAG Tip: 085 Rallye Leto izdelave: 1992 Zmogljivost: 7,9 m³ /min 3.000 obr/min 45 kW Digitalni prikazovalnik Vijačni kompresor Proizvajalec: MANNESMANN DEMAG Tip: 085 Rallye Leto izdelave: 1992 Zmogljivost: 7,9 m³ /min Tlak: 75 bar 3.000 obr/min 45 kW Hladilni sušilnik stisnjenega zraka Proizvajalec: MANNESMANN DEMAG Tip: AD160AB Kjdpfx Afori I Rrs Njll Leto izdelave: 1993 Separator olje-voda Tip: ÖWAMAT 6 Rezervoar za stisnjen zrak Proizvajalec: LOHENNER Tip: ZU47/21 Prostornina: 5.000 l Izvedba: stoječa Leto izdelave: 1993 Nadtlak: 11 bar

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Kjdsuy Ifgopfx Af Njll Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.).

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling Klodpfx Afsx D Rqrj Nel • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm Kedpfx Aox D Nwqsf Noll • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine depth: 6,600 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010,

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Razdalja med stebri (V): 580 mm Klodpfjyark Tex Af Nel Razdalja med stebri (H): 580 mm Tip: Horizontalen Pogon: Hidravlični

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 160 t Premer vijaka: 40 mm Razdalja med stebri V: 520 mm Razdalja med stebri H: 520 mm Tip: Horizontalen Kljdpfx Asyarfdef Nel Pogon: Hidravlični

Stanje: kot nova (razstavni stroj), Used/overhauled hoist motor for a Demag rope hoist P ATTENTION! Kljdpfxeh Uqccj Af Nol We have more than 15,000 Demag spare parts in stock. For further information, please visit our website or check our other listings.

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Omrežna priključitev: 380 V, 50 Hz Kljdpexcbnlsfx Af Nsl Teža: 20 kg dobro stanje

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Klsdpfx Afjwwqbye Nol Serial number: 86584 Front tire condition: 70% Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve manifold, control block, directional control valve Kljdpfx Aeb Nktujf Njl - Solenoid valve - Type: CPE18-M1H-5J-1/4 - Operating pressure: 2-10 bar - Quantity: 28 valves available - Price: per piece - Weight: 0.1 kg/unit

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Kljdpfx Afjxykw Re Njl Zapiralna sila: 280 t Premer polža: 45 mm Teža brizga: 294 g Razdalja med stebri (V): 630 mm Razdalja med stebri (H): 630 mm Prostornina brizga: 323 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Klodpfx Aowk Aw Hof Nol Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, Proximity Switch, Proximity Sensor - Manufacturer: Festo, proximity switch unused, original packaging - Model: SME-8-K-LED-24 150 855 - Quantity: 22 units available - Price: per piece Kedpfx Asb A S Hlef Njll - Weight: 0.1 kg/unit

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, DEMAG DVOJNOSEŽNI MOSTNI ŽERJAVI, LETO 1998, Z DVIŽNIM MEHANIZMOM. DOLŽINA NOSILCA: 28.200 mm. VIŠINA POD NOSILCEM: 11 METROV. DELOVNI. DOKUMENTACIJA IN VZDRŽEVALNA DOSJEJA NA VOLJO. Klodpoyb Tt Ssfx Af Nsl