Rezkalni stroj

Deckel FP3 LV Typ 2309

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start Iijdpfxjrqwbij Ah Aek • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 – 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque/milling performance Iodpfsv Nqu Esx Ah Ajik Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable quill, vertical stroke 60 mm, SK40, M16 drawbolt thread Axes: X/Y/Z 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, Iedpfxoq H Eabs Ah Aoik We are offering milling machines of the Deckel FP3 type. The machine is at least technically inspected in our workshop and is therefore fully operational. We would be very pleased to receive your inquiry! Delivery time: upon request Dimensions: 2.00x1.60x1.90m (LxWxH) Weight: approx. 1500kg X-axis travel: 500mm Y-axis travel: 300mm Z-axis travel: 380mm Table clamping surface: 800x420mm Spindle speed range: 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Feed axes: X, Y, Z Feed rate: 10–500mm/min Rapid traverse: approx. 1500mm/min Further equipment and accessories: available on request Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - If desired, we can completely or partially overhaul the selected machine - You are free to choose the paint color of the selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further equipment such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Technical Data: Working length: 2,600 mm Frame gap: 2,150 mm Press force: 45 t CNC control: DELEM DA 66 W Controlled axes: Y1/Y2; X; R; Z1/Z2 Motorized adjustable backgauge with 4 stops Throat depth: 310 mm Working height: 930 mm Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3,000 x 2,150 x 2,150 mm Weight: approx. 5 tonnes Accessories: Iiodpswd Uinjfx Ah Ask 1 set of standard tooling Condition: The machine is in very good condition. The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are commensurate with its age; used machines are sold without any warranty.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Weiler Primus VC precizni stružnica Leto izdelave: 2011 Tehnične podrobnosti Premer struženja: 250 mm Dolžina struženja: 500 mm Višina konic: 140 mm Premer nad sanmi postelje: 280 mm Maks. premer nad prečnim suportom: 150 mm Glavno vreteno: Območje vrtljajev glavnega vretena: 30 – 4.000 min⁻¹ Moč: 4,0 kW Število prestav: 1 Vpenjalna glava: velikost 5 / DIN 55027 Premer vretena v prednjem ležaju: 70 mm Premer odprtine vretena: 40 mm Uporabni premer prehoda palic: 40 mm Nosilec orodja: Sistem: MultiFix B Presek držala rezila: 20 x 20 mm Konjiček: Hod pinole: 85 mm Premer pinole: 40 mm Stožec konjička: MK 3 Pomiki: Število pomikov: 24 Vzdolžni pomik: 0,02 – 0,63 mm/obrat Prečni pomik: 0,006 – 0,2 mm/obrat Narezovanje navojev: Metrski navoj: 0,25 – 8 mm Colni navoj: 80–2 1/” Pomiki osi: X-pomik – prečni suport: 150 mm Z-pomik prečnega suporta: 500 mm Z-pomik zgornjega suporta: 110 mm Skupna priključna moč: 15 kVA Teža stroja: pribl. 800 kg Dimenzije (DxŠxV): 1400 x 935 x 1550 mm Oprema/možnosti: - Dokumentacija - Tridelna vpenjalna glava, premer 160 mm, z čeljustmi - Štiridelna vpenjalna glava, premer 160 mm, z čeljustmi - Vpenjalna glava za vpenjalne puše z vpenjalnimi pušami - Konjiček - MultiFix nosilec orodja z držali - Podporni prislon (luneta) - Menjalna kolesa - Razno orodje - Lista omara Iiodpfx Asw Ebdbsh Aok - Rezervni deli - ipd. Stroj je pod napetostjo v našem skladišču.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control system HS, cycle-controlled, year of manufacture 1998, in very good original condition. This machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed X and Y: 2 to 1600 mm/min, stepless Feed Z: 2 to 1000 mm/min, stepless Rapid feed X and Y: 1.6 m/min Rapid feed Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable through 18 gear stages - Vertical milling head swivels right and left - Hydro-mechanical tool clamping (vertical and horizontal) - Automatic central lubrication - Coolant unit external - Control cabinet mounted to the machine - Fixed angle table - Operating manual and circuit diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight approx. 1,750 kg Accessories and equipment: Ijdpfx Ajwyn Rqeh Aoik - Operating manual, electrical diagrams - Machine feet About the machine: We are offering a Hermle UWF 802 M milling machine with NC control system HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine live under power on site and see its condition for yourself.

Stanje: pripravljen za uporabo (rabljen), An older Kellenberger precision cylindrical grinding machine, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, max. workpiece weight: 3 kg, max. workpiece diameter: 245 mm, max. workpiece length: 130 mm. An on-site inspection is possible. Isdpfx Aew Edpgsh Ajik

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost: 2.500 kg, Roller Support by Dumeta CHGK-5-NDPU Load capacity: 2500 kg It was a mistaken investment and has hardly been used, therefore it is in absolutely like-new condition. The unit is available for immediate delivery. Iijdpfx Ahowffxis Aek

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: Iisdpfetwlwzex Ah Aok >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: rabljeno, rabljena Michael Deckel S11 - popolnoma delujoča Iiodpfxox Hyn Io Ah Ask