Orodni rezalnik

DECKEL FP 1

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe - Cap de frezat vertical - Reglare verticală 100 mm - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Nsdpfxexmgguj Adyjwb Stare: folosită.

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Multifix quick-change tool post with turning tool Njdpjvav Sdofx Adyowb Coolant system Foot switch Thread cutting possible (metric, Whitworth, module, pitch)

Stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, položaj glave za glodanje: SK40, vhodna napetost: 400 V, Deckel FP1 2-axis Active Travels: X = 300 mm Y = 160 mm Z = 340 mm Spindle speed 40-2000 rpm Automatic feed and rapid traverse on the X, Y and Z axes. Infinitely variable control. Table size 600 x 260 mm Nwjdpfsvuzg Aox Adyeb 2-axis Aktiv control, point-to-point operation. 3-axis digital readout by Heidenhain. Spindle taper SK40 Deckel (external thread).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki X-pot: 300 mm y-pot: 160 mm z-pot: 290 mm Površina mize: 600 x 210 mm Nosilec orodja: SK 40 Hitrosti vretena: (16) 40 - 2000 o/min Vodilni pomik brezstopenjski: 5 - 500 mm/min Hitri pomik: 1,2 m/min Pogon vretena: 1,5 / 1,9 kW Skupna potrebna moč: 9,5 kVA Teža stroja pribl.: 830 kg Potreben prostor pribl.: 2000 x 2200 x 1655 mm Dodatne informacije Stroj je v zelo dobrem stanju in prihaja iz učne delavnice. Oprema: * 3-osni pozicijski krmilnik z aktivnim digitalnim prikazom Heidenhain TNC 123 - Ročno upravljanje: Ročni način in pozicioniranje z ročnim vnosom - Avtomatski način: Programirano izvajanje posameznih blokov, shranjevanje programov * Fiksna kotna miza * Premakljiv navpični rezkalni glavič, nagibni razpon +/- 90°, pomik pinole 60 mm * Naprava za hlajenje * Centralno mazanje * Protipodporna glava z ležajem Nodpfx Adoyangqeyewb * Nihajna stopala * Dokumentacija

Stanje: rabljeno, Leto izdelave: 2016, Overview Nodpfxjtz H T De Adyjwb This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The line is fully equipped, in very good technical condition, and shows only minimal signs of use. The system is still installed and connected, and therefore can be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/Flat pouch formats: 20/25g, 50g, 300g, 500g, 750g - Capability for micro-dosing of powders - Modern wide zipper/conveyor Scope of Supply - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing units between the discharge stations, the mixer, and the multihead weigher - Ishida X-ray inspection system with reject unit, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject unit - System for nitrogen or other inert gas injection, including measurement system - Dust extraction system - Euro-slot - Smooth sealing system

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rezkalni stroj Deckel FP1. Zelo dobro stanje. Popolnoma funkcionalen. Nodsxgdr Iepfx Adyewb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Nwjdpew Agxrsfx Adysb Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machine condition is excellent, having completed only 123,000 cycles. Nsdpem Ak R Usfx Adyewb CNC-controlled automatic machine designed for processing welded frames. Independent drive and control system. Multiple operations performed within the same cycle time Operates in conjunction with a welding and cleaning line Does not require additional shop floor space Can be adapted for operation in a sash line All processing operations are performed during the cooling phase: - Drainage - Ventilation grooves - Ventilation bores in colored profiles - Drilling of frame for mullion connector - Hinge drillings in the frame (x6) The center is equipped with its own transfer system for moving frames from the welder to the cleaner SPS, NC control User-friendly visualization interface

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table Nwsdpfx Asx Tdy Iodyjb New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Nodpex S Edljfx Adyswb Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 176308, Country of Origin: Switzerland Voltage: 400 / 380 / 50 / 3 Net Weight: approx. 350 kg Dimensions: 82x85x156 cm Installed Power: max 2 kVA Customs Tariff Code: 8460.3930 TECHNICAL SPECIFICATIONS Nwodew T S Sqepfx Adyjb GRINDING SPINDLE GROUP Spindle Speed (bi-directional): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding Motor Power (2,800 rpm): 0.4 HP Vertical Slide Travel (linear): 100 mm Micrometer Stop Adjustment Travel: 25 mm Micrometer Stop Readout Accuracy: 0.01 mm WORKPIECE SPINDLE GROUP Workpiece Spindle Speed (bi-directional, continuous): 100–900 rpm Motor Power: 0.2 HP Number of Indexing Plate Teeth: 120 Vernier Angular Readout: 20' Collet Type: W-20 Horizontal Travel: 100 mm Rapid Feed per Handwheel Revolution: 2 mm Micrometric Feed per Handwheel Revolution: 0.1 mm Micrometric Feed per Scale Division: 0.001 mm Spindle Head Swivel Range: a) In Main Direction: 165° Fixed Ratchet Indexing: every 3° Indexing with Micrometer Screw: every 2' b) In Grinding Plane: approx. 15° Index at 0° Cross Feed Travel: 80 mm Micrometer Travel: 25 mm Readout Accuracy: 0.01 mm Extraction Motor Power (2,800 rpm): 0.25 HP Technical specifications are provided without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Three-phase motor, electric motor, brake motor Njdoul H Dwopfx Adyjwb - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from a Deckel FP4L milling machine - Power output: 4.0 kW - Speed: 1435 rpm - Mounting type: B14 - Protection rating: IP 44 - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Leto izdelave: 1974, Stanje: skoraj kot novo (rabljeno), As-new Deckel FP1 universal milling machine, overhauled by FPS, featuring 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Equipped with spindle brake. Accessories include tailstock and various collets. The machine is in excellent, ready-to-operate condition and can be demonstrated under power by arrangement. Nedpfxoq A Icqo Adyewb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, stiskalna sila: 80 t, Oprema: varnostna svetlobna zapora, Manufacturer: Amada Model: ITS 80-25 Year of manufacture: 1994 Pressing force: 80 t Nsdpfsvncifsx Adyewb Bending length: 2500 mm Throat depth: 400 mm Stroke: 100 mm Power: 9.5 kW Dimensions (LxWxH): 3010 x 2230 x 2230 mm Weight: 4950 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck Nsdsvnr Hyopfx Adyewb - Additional accessories available on request.