Obdelovalni center - univerzalni

DECKEL MAHO DMU 60 monoBLOCK

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 42.339 h, Glavni pogon Število osi: 3 Gibanja Pomik po osi X: 730 mm Pomik po osi Y: 510 mm Pomik po osi Z: 510 mm Mediji Transporter za odrezke: Da Ihjdpfox D Nwksx Af Tst Notranje hlajenje: Da Ta 3-osni DMG DECKEL MAHO DMU 60 monoBlock je bil izdelan leta 2005. Opremljen je s transporterjem za odrezke in sistemom notranjega hlajenja, kar ga naredi idealnega za zahtevnejše obdelovalne naloge. Če iščete visoko kakovostno rezkalno opremo, razmislite o stroju DMG DECKEL MAHO DMU 60 monoBlock, ki je pri nas na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders Iedpfx Afoxp Hmas Toht - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 630 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, širina mize: 1.000 mm, dolžina mize: 600 mm, obremenitev mize: 500 kg, skupna masa: 6.500 kg, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 24, Oprema: transportni trak za ostružke, Oprema: Približno 40 držal SK-40 za orodje (brez rezalnega orodja) Obratovalne ure: 32.379 h (stanje: 09.07.2024) Čas delovanja vretena: 15.674 h (stanje: 09.07.2024) Obdelovanci, vpeli na mizi, niso vključeni v obseg dobave! Ihedpfx Afjxcpkzj Tjt Stroj je na voljo: Takoj

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Na voljo sta dve CNC rezkalni stroji DMG. 1) Deckel Maho DMU 100 monoBlock, leto izdelave: 2011, pomik X/Y/Z: 1150mm/710mm/710mm, mesta za orodje: 32, hitrost pomika: 30m/min, vpenjalo orodja: SK40, število vrtljajev: 18000 obr/min. Dimenzije stroja X/Y/Z: cca 4250mm/3500mm/3300mm, teža: cca 10000kg, krmiljenje: Heidenhain iTNC 530, delovne ure: 30521h, ure vretena: 15388h. 2) Deckel Maho DMU 60 monoBlock, leto izdelave: 2006, pomik X/Y/Z: 730mm/560mm/560mm, mesta za orodje: 24, hitrost pomika: 30m/min, vpenjalo orodja: SK40. Dimenzije stroja X/Y/Z: cca 2900mm/1900mm/2250mm, teža: cca 7000kg, krmiljenje: Heidenhain iTNC 530, delovne ure: 39296h, ure vretena: 15305h. Dokumentacija je na voljo. Ogled na lokaciji je možen. Možen je le skupinski nakup. Iedpfx Afoxtpqvj Tsht

Stanje: rabljeno, Leto izdelave: 2005, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Swiveling B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Machine weight approx.: 27.0 t Space requirements approx.: 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO – DMC 100 U duoBLOCK Ihodpfx Afswf Rgfj Tot - Swiveling milling head (B axis) - NC rotary table (C axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction system - WITHOUT tools

Stanje: rabljeno, Leto izdelave: 2007, X-travel: 730 mm Y-travel: 560 mm Z-travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range (max): 18,000 rpm Main spindle drive power: 10 / 15 kW Maximum torque: 130 / 87 Nm Tool holder: HSK-A63 Swiveling (NC): ° Clamping surface (table): 1,000 x 600 mm Ihedpfjwpw E Njx Af Tot T-slots: 9x 14 x 63 mm Table diameter: 600 mm Rotary axis C: 360° Maximum table load: 500 kg Number of tool stations: 60 positions Tool holder: HSK-A63 Total power requirement: 40 kVA Machine weight: approx. 11.0 t Space requirements (LxWxH): approx. 4.5 x 4.5 x 3.5 m CNC Universal Machining Center DECKEL MAHO - DMU 60 monoBLOCK - 5 axes - NC rotary table - Swivel milling head

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 00287, Technical Data Manufacturer: Brown & Sharpe Model: DEA Scirocco 101509 Year of manufacture: 2001 Serial number: 00287 Software: PC-DMIS 2019R1 Measuring Range X = 1000 mm Y = 1500 mm Z = 900 mm Measuring Table Length = 2280 mm Width = 1145 mm The machine can be upgraded with new accessories according to customer requirements. Ijdpfei Dpggex Af Toht Price: on request! Installation and commissioning available! We will be happy to provide you with a detailed quotation. Note: Our offer is aimed exclusively at professional customers. (Specifications, data, and prices are subject to change and error. Prior sale reserved!)

Stanje: novo, POPOLNOMA NOVO OBDELOVALNO SREDIŠČE HEIDENHAIN TNC 7 digitalno tirno krmiljenje z 19" zaslonom HEIDENHAIN paket (motorji, merilni sistemi in ročno kolo) X-os: 650 mm Y-os: 700 mm Z-os: 645 mm Ijdpfx Ajhy Artof Teht Premer mize: 410 mm Maksimalni premer obdelovanca: 500 mm Maksimalna hitrost vretena: 12.000 min⁻¹ (oljno hlajeno z MMS) Vpenjalna glava vretena: SK 40-BIG PLUS (BVD 40) Maksimalna moč vretenskega motorja: 17 kW IKZ – notranja dovod hladilne tekočine – 20 bar Hitri pomiki X,Y & Z: 30.000 mm/min Natančnost pozicioniranja: ± 0,005 mm Ponavljivost: ± 0,003 mm Menjalec orodij z dvojno roko: 30-kratni (opcijsko do 80 orodij) Transporter ostružkov z verižnim trakom Popolno ohišje Odgovarjamo le na povpraševanja iz Nemčije / Le povpraševanja iz Nemčije bodo obravnavana

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 9.080 h, Funkcionalnost: popolnoma funkcionalen, For sale: Well-maintained CNC Turning and Milling Center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel Paths: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and Accessories: - Turret: 12 positions, all driven - Driven tool speed: max. 10,000 rpm - Parts catcher - Power supply: 400 V - Power consumption: 37.6 KVA - Internal coolant system - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manual measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Includes tooling: 8 fixed tools, 3 driven tools - Incl. extraction unit, manufacturer: Indusa Ihedpfx Afsxzqhre Tst - Complete documentation included Machine available immediately! The machine has been fully cleaned and inspected! Loading handled by us! Transport can be organized upon request!

Stanje: dober (rabljeno), Leto izdelave: 2002, Stroj je v dobrem stanju. Stranske plošče so bile odstranjene, zato ni potreben prevoz z nadširino. Ihedpfxjtwpame Af Tst