5-osni obdelovalni center

Deckel Maho DMF 220 linear

Stanje: rabljeno, Leto izdelave: 2002, x-axis travel 2,200 mm y-axis travel 560 mm z-axis travel 720 mm Control: 840 D Powerline ShopMill Siemens Main spindle: Speed range - main spindle: 20 - 12,000 rpm Drive power - main spindle: 35 / 25 kW Max. torque: 130 / 87 Nm Tool holder: SK 40 Internal coolant supply: 40 bar Worktable: Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Number of T-slots: 6 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool changer: Number of tool stations: 30 Max. tool length: 300 mm Max. tool weight: 6 kg Max. tool diameter: 80 / 125 mm Feeds: Feed rate: 20,000 mm/min Input increment: 0.01 mm Dksdpfxjtqmr Rj Ag Nou Rapid traverse (X / Y / Z): 100 / 50 / 50 m/min Positioning system Resolution: 0.001 mm Total power requirement: 60 kVA Machine weight approx. 12.5 t Space requirement approx. 6.0 x 3.7 x 2.9 m CNC Vertical Machining Center DECKEL MAHO - DMF 220 linear - from single-part production (aluminum, brass and stainless steel) - incl. work area partition wall - M26 function (switching to air blast through spindle center) - new ball screw for Z axis incl. bearings (April 2015) - new milling spindle (2016) - Spindle hours: approx. 11,966 h - WITHOUT vices

Stanje: rabljeno, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D Path Control Heidenhain iTNC 530 Travel range X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar bolt DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed speed 0-20,000 mm/min Rapid traverse speed X axis 100 m/min Rapid traverse speed Y+Z axis 50 m/min Mains connection 400 Volt, 50 Hz, 73 kVA - 30-position automatic tool changer - Internal coolant supply through the spindle 40 bar (ICS) - Compressed air with minimum quantity lubrication for tool cooling - Compressed air through spindle center via M-function - 2 rotating safety glass panes - Operating mode 4, process monitoring in production - Electronic handwheel on the operator station - Separate coolant preparation unit, paper band filter with filter sump - Chip conveyor, to be slid under the working area - Centralized grease lubrication system - Operating manual - Operating hours - control on = 75188 h - Operating hours - program run or spindle on = 31632 h - Control system with interfaces for data transfer, RS232C + USB Installation area L x W x H 650 x 400 x 280 cm Footprint of the main machine L x W x H 490 x 395 x 275 cm (with operator panel) Space required for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space required for coolant preparation unit L x W x H 180 x 115 x 190 cm (500 kg) Transport dimensions main machine L x W x H 500 x 248 x 275 cm Additional transport space required for further components 550 x 240 x 250 cm Weight of main machine approx. 12.5 tons Dkedpfew Iqt Aox Ag Nou Good condition

Stanje: rabljeno, Leto izdelave: 2003, X-axis travel 2,200 mm y-axis travel 560 mm z-axis travel 720 mm Control unit iTNC 530 Heidenhain Spindle speed range - milling 20 ~ 12,000 rpm Tool holder SK 40 Spindle drive power 35 / 25 kW Tool magazine with 100 positions Table clamping surface 2,600 x 600 mm Rapid traverse X-axis 100 m/min Dedpfx Agotumqve Neku Rapid traverse Y-axis 50 m/min Rapid traverse Z-axis 50 m/min Max. tool diameter 80 mm Max. tool diameter with free adjacent pocket 130 mm Max. tool length 300 mm Max. tool weight 6 kg Max. table load 2,200 kg Total power requirement kW Machine weight approx. 12 t Space requirements approx. 7.0 x 4.2 x 2.7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - New spindle installed (April 2024) - Including 4th axis 560mm and tailstock (centre height 350mm)