Obdelovalni center - navpično

DECKEL MAHO DMF 220 linear

Stanje: rabljeno, Leto izdelave: 2003, X-axis travel 2,200 mm y-axis travel 560 mm z-axis travel 720 mm Control unit iTNC 530 Heidenhain Spindle speed range - milling 20 ~ 12,000 rpm Tool holder SK 40 Spindle drive power 35 / 25 kW Tool magazine with 100 positions Table clamping surface 2,600 x 600 mm Rapid traverse X-axis 100 m/min Rapid traverse Y-axis 50 m/min Rapid traverse Z-axis 50 m/min Max. tool diameter 80 mm Max. tool diameter with free adjacent pocket 130 mm Max. tool length 300 mm Max. tool weight 6 kg Max. table load 2,200 kg Total power requirement kW Machine weight approx. 12 t Space requirements approx. 7.0 x 4.2 x 2.7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - New spindle installed (April 2024) - Including 4th axis 560mm and tailstock (centre height 350mm) Crjdpfxotumqvo Adhoh

Stanje: rabljeno, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D Path Control Heidenhain iTNC 530 Travel range X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar bolt DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed speed 0-20,000 mm/min Rapid traverse speed X axis 100 m/min Rapid traverse speed Y+Z axis 50 m/min Mains connection 400 Volt, 50 Hz, 73 kVA - 30-position automatic tool changer - Internal coolant supply through the spindle 40 bar (ICS) - Compressed air with minimum quantity lubrication for tool cooling - Compressed air through spindle center via M-function - 2 rotating safety glass panes - Operating mode 4, process monitoring in production - Electronic handwheel on the operator station - Separate coolant preparation unit, paper band filter with filter sump - Chip conveyor, to be slid under the working area Crodow Iqt Aepfx Adhjh - Centralized grease lubrication system - Operating manual - Operating hours - control on = 75188 h - Operating hours - program run or spindle on = 31632 h - Control system with interfaces for data transfer, RS232C + USB Installation area L x W x H 650 x 400 x 280 cm Footprint of the main machine L x W x H 490 x 395 x 275 cm (with operator panel) Space required for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space required for coolant preparation unit L x W x H 180 x 115 x 190 cm (500 kg) Transport dimensions main machine L x W x H 500 x 248 x 275 cm Additional transport space required for further components 550 x 240 x 250 cm Weight of main machine approx. 12.5 tons Good condition

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 5.012 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 15115221654, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 560 mm, pomik po osi Z: 720 mm, največja hitrost vretena: 6.300 obr/min, število mest v zalogovniku orodij: 100, kot vrtenja osi B (min.): −90 °, kot vrtenja osi B (max.): 90 °, kot vrtenja osi C (maks.): 360 °, Note: Minor relay fault. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse Rapid traverse X-axis: 100 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load capacity: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine stations: 100 Rotary and swivel axes Crsdpfxewd N D Ts Adheh Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel spindle range (B-axis): +90° to -90° Swivel spindle indexing (B-axis): 2.5° Accuracy Positioning tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control Control manufacturer: SIEMENS Control model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h Operating hours: 17,969 h Connected load: 60 kVA Overall length: 6,800 mm Overall width: 3,900 mm Overall height: 2,750 mm Overall weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Infinitely variable spindle speed - Technical documentation and manual - Hydraulically clamped rotary axis - Swivel spindle with 2.5° indexing