Točkovni varilni stroj, uporovni varilni stroj

DALEX SL 16 EA

Stanje: novo, Model designation Prjdpjgvqzcjfx Agpsd Airtower FT 20,000

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm Prsdpfxjq Evn Eo Agped - Square: 300 x 300 mm - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm - Weight (approx.): 1000 kg

Stanje: zelo dobro (rabljeno), Pneumatically operated, water-cooled spot welding gun for industrial use Prodpfx Ajgibv Eegped Model: DALEX 3427 D Rated power at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Electrode force: 580 daN Equipped with double-stroke cylinder – long stroke 62 mm – pre-stroke 40 mm Working stroke with adjustable range: 0–22 mm With cardan suspension and mounting bracket 10 m power and control cable Electrode arms: 350 mm Arm spacing: 170 mm With synchronous welding control 15036

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. Prodpfx Ajxddamegpjd 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Stanje: rabljeno, Leto izdelave: 2000, Premer reza 280 mm Dolžina tračnega lista 4930 mm Območje reza pri 90 stopinjah: kvadrat 280 x 280 mm Območje reza pri 45 stopinjah: okroglo 280 mm Prsdpow En Efefx Agpod Območje reza pri 45 stopinjah: kvadrat 280 x 280 mm Območje reza pri 60 stopinjah: okroglo 220 mm Območje reza pri 60 stopinjah: kvadrat 200 x 200 mm Podajalna dolžina 600 mm Večkratna podajalna dolžina 5400 mm Hitrost reza 17 - 90 m/min Dolžina ostanka min./maks. min. 30 mm Minimalni premer reza 10 mm Krmiljenje KASTO, Compact Control Skupna potrebna moč 5 kW Teža stroja cca 1,75 t Mere stroja D x Š x V 2,68 x 2,54 x 1,59 m Dodatki: hladilni sistem, valjčna proga 3300 mm dolga, 300 mm široka; valjčna proga 1350 mm dolga, 300 mm široka.

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 05542, Offer 25128 Predpfswn Emljx Agpod Technical Data: - Rated power at 50% duty cycle: 25 kVA - Maximum welding power: 68 kVA - Throat depth adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding capacity for sheet steel approx.: 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water flow: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - Equipped with: - Single-phase controller T 90 Mark II - Electric foot switch - Separate cooling water recirculator

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: nepreverjeno, 1 used mitre band saw Make: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2,491 mm Width: 1,240 mm Height: 1,369 mm (bow down), 2,109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Podpfx Agswuqbbjpord Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically regulated flow control Material clamping: manual Saw band dimensions: 5,090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical, via tensioning cross Saw band cleaning: by easily replaceable wire brush driven in proportion to the main drive. Coolant: Supplied via a coolant nozzle, tank volume approx. 50 l, pump output approx. 16 l/min. Cutting capacities in mm approx.: Mitre angle 0° (90°) 45° 60° Round 400 320 240 Square 320 x 320 320 x 320 220 x 220 Flat (W x H) 400 x 320 210 x 320

Stanje: zelo dobro (rabljeno), Stud Welding Machine Manufacturer: TRW. Nelson Model: Alpha 850 Year of manufacture: 1995 Maximum welding capacity: studs up to 12 mm Welding current: steplessly adjustable from 100 to 850 A Connection voltage: 400 V, 32 A Transport dimensions: Psdpfx Aevcl T Aegpsrd Length: 550 mm Width: 320 mm Height: 380 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Rated power at 50% duty cycle: 63 kVA Short-circuit current: 26.3 kA Electrode force: 65–390 daN / single stroke Throat depth: 450–750 mm, continuously adjustable --- Control system: MPS 15036 (5-timer, 1 program) --- Includes additional options: Prjdpfx Agjv T Unwoped - Double foot switch for no-voltage positioning --- 6-month warranty --- Training and commissioning available on request --- Spot welding electrodes and spare parts available from stock --- For further information, please visit our website

Stanje: dober (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 6535, Offre 25230 Scie à ruban automatique guidée par deux colonnes hydrauliques Données techniques : - Cycle de travail automatique pour la coupe, levée/descente hydraulique du cadre de scie, orientation manuelle de l’onglet avec serrage hydraulique - Avance automatique du matériau, orientation motorisée de l’onglet - Dimensions du ruban de scie : 4400 x 34 x 1,1 mm - Vitesse de coupe : réglable en continu, 15–150 m/min - Pression de coupe : réglable en continu, 10–15 bar - Vitesse de descente : 0–300 m/min - Capacité de coupe : à 90° - Rond : 335 mm - Carré/plat : 500 x 335 mm - Avance automatique du matériau : 5–2300 mm - Entraînement : 400 V / 6,5 kW - Encombrement : env. L 2400 x H 1950 x P 2200 mm Pjdpew I Scfjfx Agpsrd - Poids : env. 1800 kg