Spot welding machine 200 kVA

Dalex PMS 14-4

Stanje: dober (rabljeno), aparata za točkovno varjenje, stroji za točkovno varjenje, sistemi za točkovno varjenje, klešče za točkovno varjenje, aparati za točkovno varjenje z uporabo upora, stroji za točkovno varjenje s pomočjo vzvoda, stroji za varjenje z valjčno šobo, stroji za varjenje z izboklino Csdpfx Ajy Au Eysp Eohd - proizvajalec: Dalex, stroj za točkovno in varjenje z izboklino z mizo z valji - tip: PMS 14-4 - nazivna moč: 200 kVA - izraz: 740 mm - upravljanje: s pomočjo pedala - posamezne komponente: vključno z dokumentacijo, glej fotografije - dobava/cena: komplet - mere: stroj 2120/890/V1680 mm / miza 2730/800V1055 mm - teža: 966 kg / 70 kg

Stanje: zelo dobro (rabljeno), globina grla: 1.100 mm, nazivna moč pri 50-odstotnem delovnem ciklu: 96 kVA, tok kratkega stika: 31.500 A, vhodna napetost: 400 V, vrsta hlajenja: voda, skupna masa: 830 kg, Oprema: Na voljo je tipska ploščica, Spot Welding Machine Type PMS 11-4 G3 in 3-Phase Direct Current Version - specially designed for welding aluminium sheets - minimally used, fully inspected and cleaned - everything functions, ready for demonstration - Rated voltage: 400V/50Hz - Rated power: 96 kVA - Welding current: 23 kA Csdpfxeh N Sc Es Ap Ejhd - Connection cable cross-section: 10 mm² per phase - Fuse protection: 63A - Throat depth: 1050 mm (!!) - Electrode arm diameter: 60 mm - Electrode holder diameter: 30 mm - Electrode force: 600 daN - Stroke: 65+25 mm - Electrode taper: MK2 - Control: MPS 8043/1 by Harms & Wende with current increase and pulses - includes operating manual - 2-step foot switch in accordance with UVV - Main machine switch - Pneumatic maintenance unit - Weight: approx. 830 kg - Complete documentation with wiring diagram, compressed air circuit, and cooling water circuit available - VAT can be shown separately - Delivery from stock Dresden, approx. 4 days within Germany – export may take longer! Commissioning on-site is subject to a fee and will be billed based on actual effort. System is located in Dresden, close to the A17 motorway, and can be inspected and demonstrated by appointment.

Stanje: zelo dobro (rabljeno), Double-head cylinder projection welding machine DALEX PMS 14-4 Nominal throat depth: 350 mm Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 79.4 kA Secondary open-circuit voltage: 5.8 - 9.74 V Electrode force: 120-720 daN Equipped with 2 double-acting cylinders with approach stroke Control cabinet mounted according to VDE 0100 Main switch 4-step switch Synchronous welding control with monitoring function Chsdpfx Apod Ip Alj Eed MPS 8043 Q1 Current measuring loop Cylinders can operate in cascade or simultaneously Weight: 1,090 kg The machine is being overhauled / currently undergoing refurbishment.

Stanje: dober (rabljeno), High-performance spot welding machine in 3-phase DC configuration DALEX, type PMS 14-4 G3 Arm reach: 550 mm Rated power at 50% duty cycle: 240 kVA Secondary short-circuit current: 89.5 kA Secondary open-circuit voltage: 4.69 – 9.38 V Electrode force: 80–1200 daN with double-stroke cylinder and approach stroke Cjdpfxsgqxg Ae Ap Eohd Lower arm support Weight: 1,660 kg Mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous dual-circuit welding control 8036 S3 Machine is currently being overhauled

Stanje: novo, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm - Movable cylinder - Electrically or manually operated - Pressure gauge Chedpfsilvb Njx Ap Eod - Emergency stop - 400V

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 2316-3, Ref. No. 10622 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25 (cast iron): 40 mm - Thread cutting ST 60: M 30 - Thread cutting GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system Cedsu Et Nbjpfx Ap Ejhd - T-slots vertical on the left side of the machine

Stanje: zelo dobro (rabljeno), Točkovni varilni stroj z enojnim hodnim cilindrom in z elektrodnimi nosilci s prirobnico zgoraj in spodaj. Proizvajalec: DALEX, tip: PMS 14-3. Izpust: 350 mm. Nazivna moč pri 50 % ED: 80 kVA. Sekundarni kratkostični tok: 54,5 kA. Sekundarna prostotečna napetost: 7-14 V. Sila elektrod: 80-1.200 daN. Opremljen z: 8-stopenjskim preklopnikom, glavnim stikalom, priključno krmilno omaro HARMS+WENDE, sinhrono varilno regulacijo MPS 200, 8 varilnih programov, identifikacijsko tablico AEG. Zagon prek nožnega stikala. Codpfxstuwz Io Ap Eohd

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1976, Work table: 500 mm x 1200 mm Arm travel: 600 mm Tool holder: Morse taper 4 (MT 4) Drilling capacity: 32 mm in steel Tapping device Coolant system Electrics: 24V control voltage Two-channel emergency stop Safety guard at the drill Completely overhauled in 2025 Cedpfownn S Rjx Ap Eehd 12 months warranty New paint finish RAL 7035 / 7031

Stanje: dober (rabljeno), Leto izdelave: 2010, premer žaginega lista: 250 mm, skupna masa: 130 kg, vhodna napetost: 380 V, moč hladilne črpalke: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Model: HU 250 DV Year of manufacture: 2010 Voltage: 400 V, 50 Hz Mounted on stand, swiveling head, quick-release clamp. 2-speed motor Coolant system with pump Chjdpfstwdvijx Ap Eed Saw blade dimensions: 250 x 32 mm Cutting capacity at 45° (rectangular): 50 x 60 mm Cutting capacity at 45° (round): 65 mm Cutting capacity at 45° (square): 55 mm Cutting performance at 90° (rectangular): 55 x 95 mm Cutting capacity at 90° (round): 70 mm Cutting capacity at 90° (square): 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Leto izdelave: 2025, stanje: novo, Automatic packaging machine for filling and packaging tea into single-chamber tea bags, which are subsequently packed into 3-side sealed sachets. The system includes a volumetric dosing unit and a labeling system for attaching the string with a tag. Labeling system: In the standard version, the tag is folded and glued together with the inserted string. Optionally, a heat-sealing module is available for this stage of production. Method for attaching the string to the tea bag: Heat sealing into the edge of the tea bag. Grouped bag output can be individual, counted, or directly into a pre-erected carton (optional). - Specifications: * Max. idle machine cycle rate: 115 cycles per minute * Dosing volume: max. 10cm³ * Tea bag dimensions (LxW): 65x62.5mm * Tea bag material roll width: 125mm * Suitable tea bag material: 16.5–20g/m², one side heat-sealable Chjdpfx Apjv Nm Smj Esd * 3-side sealed sachet dimensions (LxW): 82x75mm * 3-side sealed sachet material: heat-sealable monofilms or laminated composite foil * Tag size (LxW): 28x24mm * String length: 220mm * Power supply: 220/380V * Power consumption: 2.5kW * Machine dimensions (LxWxH): 1688x1330x2205mm * Weight: 1210kg