Vertikalni obdelovalni center

DAEWOO ACE - 850

Stanje: rabljeno, Leto izdelave: 2001, CNC FANUC 18i M X-AXIS TRAVEL: 2000 MM Y-AXIS TRAVEL: 850 MM Z-AXIS TRAVEL: 830 MM SPINDLE SPEED: 6000 RPM Duedjkx E Tbspfx Abteu SPINDLE TAPER: ISO 50 DIN 69871 WORKTABLE DIMENSIONS: 2000 X 800 MM MAXIMUM LOAD CAPACITY: 3000 KG X/Y/Z RAPID TRAVERSE: 12 M/MIN COOLANT SYSTEM: INTERNAL 5 BAR, EXTERNAL 20 BAR TOOL CHANGER: 40 STATIONS 4TH AXIS WITH CNC TABLE AND TAILSTOCK CHIP CONVEYOR

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min Djdpfxsx Hgl Hj Abtouu B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Dusdsdkdi Tspfx Abtju Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Dusdpfxexmaguo Abteu Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Dusdpfx Absifn N Notsu Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: rabljeno, Leto izdelave: 1998, Technical details: Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed rate: 1 - 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool holder, size D Coolant system Dodpfx Ajwwlt Rebtouu *

Stanje: rabljeno, Leto izdelave: 1996, Tehnične podrobnosti: Teža stroja pribl.: 1750 kg Motor žage: 2,2 kW Skupna potreba moči: 5 kW Hitrost rezanja: 17 - 90 m/min Premer reza: 320 mm Maks. območje reza: 320 x 320 mm Dolžina tračnega lista: 4.930 x 34 x 1,1 mm Dolžina podajanja: max. 9x 600 mm Duedpfovpt Eysx Abteu Potrebni prostor pribl.: 2,6 x 2,4 x 1,40 m Avtomatska tračna žaga, ravni rez, min. premer reza 10 mm, min. dolžina reza 6 mm, min. dolžina ostanka 15 mm (avtomatika 80 mm), maks. masa materiala 400 kg/m, rezervoar za hladilno tekočino 60 l, zmogljivost črpalke 16 l/min, napetost vpenjanja nastavljiva 20-60 bar, transporter ostružkov 2.400 x 950 mm, valjčna proga 2.200 x 950 mm, 5 kosov rezervnih tračnih listov 4.930 x 34 x 1,1 mm, navodila za uporabo

Stanje: rabljeno, Leto izdelave: 2000, Premer reza 280 mm Dolžina tračnega lista 4930 mm Območje reza pri 90 stopinjah: kvadrat 280 x 280 mm Duedsw En Efspfx Abtou Območje reza pri 45 stopinjah: okroglo 280 mm Območje reza pri 45 stopinjah: kvadrat 280 x 280 mm Območje reza pri 60 stopinjah: okroglo 220 mm Območje reza pri 60 stopinjah: kvadrat 200 x 200 mm Podajalna dolžina 600 mm Večkratna podajalna dolžina 5400 mm Hitrost reza 17 - 90 m/min Dolžina ostanka min./maks. min. 30 mm Minimalni premer reza 10 mm Krmiljenje KASTO, Compact Control Skupna potrebna moč 5 kW Teža stroja cca 1,75 t Mere stroja D x Š x V 2,68 x 2,54 x 1,59 m Dodatki: hladilni sistem, valjčna proga 3300 mm dolga, 300 mm široka; valjčna proga 1350 mm dolga, 300 mm široka.

Leto izdelave: 2015, stanje: novo, Shaft furnace Clear height: 1100 mm Clear diameter: 790 mm Outer diameter: 1560 mm Dusdpfxjcdi D Ds Abtou External height (without lid): 1480 mm External height (incl. lid): 2300 mm Electrically heated: 40 kW Recirculation fan: 2.2 kW Three-phase connection: 400 V, 50 Hz Maximum temperature: 750°C

Stanje: rabljeno, Leto izdelave: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm Dsdpfxswq Nc No Abtjuu Vertical automatic feed Equipped with fine-pole electro-magnetic chuck Grinding wheel diameter: 300 x 50 x 76.2 mm Includes paper band filtration unit and manual dresser on top Various wheels and flanges included Weight: approx. 2,400 kg Required floor space: approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please feel free to contact us.