Stroj za pakiranje kartona

Dünki Silicon Streifenspender

Stanje: pripravljen za uporabo (rabljen),

Stanje: dober (rabljeno), Preša za upogibanje Znamka: AMADA Tip: HFT 80/25 Kapaciteta: 2500 x 80T 4 osi Dedpewivddofx Afljul Razdalja med stebri: 1800 mm Dimenzije: 3500 x 1500 x 2100 mm Teža: 6.500 kg Opremljena z novimi in rabljenimi orodji

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Aluminium flat conveyor belt including substructure. Dimensions: 6000 + 620 x 105 mm Conveyor belt width: 500 mm PVC conveyor belt with cleats, sidewall, and sealing tape included. Dusdod Ra Uaepfx Afljl V2A stainless steel feed hopper at the beginning of the conveyor belt. * Optionally available with magnetic deflection roller at the end of the conveyor belt. * Optionally available as an incline conveyor. * Custom designs in all configurations possible.

Leto izdelave: 2006, Stanje: dober (rabljeno), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Tested and inspected, Duodjdtr A Topfx Aflel

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Komplett generalüberholt Dodsriui Tjpfx Afleul

Stanje: rabljeno, Hallo, wir können anbieten: Djdpfxjwqz Dre Afleul KBA 142-6-LV, Baujahr 1994 Lackwerk nach der 5. Druckeinheit, Baldwin Kühlgerät, Gummituch-Waschautomat, Weko T 77 Puder-Sprühgerät, Non-Stop Einrichtung an Anleger und Auslage, Plattenbiegeeinrichtung, IR- und Heißlufttrockner in der Auslage, CX-Einrichtung für Karton (ohne Kompressor), halbautomatischer Plattenwechsel, Delta-System am Varidamp.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) Djdpfog Ezarsx Afljul - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Leto izdelave: 2025, Stanje: novo, The RS-9 has been specifically developed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine with which it will be used. The shredder enables fast and safe shredding of paper, which can be taken directly from the die-cutting machine, allowing for easy transport to the baler via a conveyor system. The RS-9 shredder is designed to reduce waste from a die-cutting machine for straightforward transport via a belt system. Dusdpfxeiklxbs Aflsl Our shredder is simple to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 also features retractable shafts, ensuring worker safety and extending the service life of the device. The machine is fitted with a frequency inverter that allows for soft starting and precise motor control. Feel free to contact us.

Stanje: rabljeno, Leto izdelave: 1988, Bobst Flexo 1604 Printing Press, 4 bottom printing units, anilox cylinders 120 l/cm and 80 l/cm Bobst Transfer Unit BOBST SPO 1600 FLATBED DIE-CUTTER, maximum format 1100 mm x 1600 mm / 43.3" x 63", with 4 printing units plus bottom printing, conventional roller feeder - Anilox cylinders: 120 l/cm and 80 l/cm Dujdev Ifpuspfx Aflel - Open steel chambered doctor blade - Vacuum feeder - Die-cutting section - Waste removal section - Centerline II - High-pile delivery with two elevating tables - Maximum sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Minimum sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Die-cutting force: 400 t - Materials: E, B, C, CB, BE flutes - Maximum speed: 6,000 sheets/hour Machines can be sold separately.

Stanje: rabljeno, Leto izdelave: 2000, maks. premer obdelave 20 mm maks. dolžina obdelave 320 mm Dsdpjvnwfzjfx Afleul premer vretena 24 mm hitrost vretena 200 - 10.000 min⁻¹ Krmiljenje MITSUBISHI CNC avtomatski dolgostržni stroj | CITIZEN - M-20, opremljen s podajalcem palic. Stroj je v zelo dobro vzdrževanem stanju. Dodatne tehnične podrobnosti najdete v ponudbi.