Skobeljni stroji nakup rabljenega (26)

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Gksdpfx Ajih Dxdsb Tef Surfacing Total table length 2,250 mm Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Gedpohkz E Tjfx Ab Tskf Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Gkedoqlck Nspfx Ab Tsf Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Minimum working length: 210 mm Maximum cutting depth: 8 mm Gedpfx Asff Efaeb Tskf Electrical Data Connection voltage: 400 V Phase(s): 3 phases Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Surface planer and thicknesser with TERSA quick-change cutterhead system. Equipped with the TERSA quick-change system for rapid cutter knife replacement in seconds. The TERSA cutterhead system ensures exceptionally quiet operation. Helically-toothed steel infeed roller for consistent and even material feed. Robust planing tables made of ribbed, milled, and stress-relieved grey cast iron, ensuring resistance to deformation and long-term flatness. Large, tiltable planing fence for precise planing, reversible 90°/45°, with quick clamping mechanism. Planer table opens to the rear. Powerful motor. Solid steel/grey cast iron construction. Long-hole drilling unit retrofittable. Equipment details: TERSA cutterhead No adjustment or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Jointer: Standard with TERSA quick-change cutterhead system Large-scale planing tables Gkodpfx Aodqy Uqob Tef The jointer and thicknesser tables made of grey cast iron guarantee maximum operational smoothness and vibration-free running. Thickness planer: With the powerful feed mechanism, workpieces up to 200 mm in height can be planed. The helically-toothed feed roller guarantees constant material feed. Conversion from jointer to thickness planer is completed in seconds with a single action. Drive: Sturdy chain drive design Drive wheels made of steel Heavy-duty cast iron bearing support Planing system: Heavy-duty anti-kickback devices prevent workpiece kickback. Three-knife TERSA cutterhead ensures optimal planing results. Special features: Large planing fence, reversible 90°/45° for precise planing, with quick clamping mechanism Includes: Large, reversible 90°/45° planing fence for precise planing with quick clamping mechanism TERSA cutterhead Model: minimax fs 30g TERSA Article no.: 5503036 Technical data: --- Planer specifications --- Total table length: 1200 mm Infeed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. depth of cut: 3 mm --- Thicknesser specifications --- Thicknesser table dimensions: 450 x 300 mm Min./max. working height: 3/200 mm Feed speed: 6 m/min Cutterhead diameter/number of knives: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction port diameter: 2 x 120 mm Weight: 140 kg

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa cutterhead Knife changes in seconds When the machine starts, centrifugal force automatically tensions the knives—self-locking The knife projection is automatically set without using jigs Work table The work table is mounted on four large trapezoidal-thread spindles, guaranteeing maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting system, the table position is reliably maintained even without locking Helically toothed steel feed rollers for constant and even wood feed Second, rubberized feed roller at outfeed Heavy-duty anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions & weights Length: approx. 1170 mm Width/depth: approx. 1003 mm Weight: approx. 660 kg Godped Hx E Iefx Ab Tjkf Dust extraction connection Extraction port diameter (thickness): 150 mm Drive power Main motor: 7.5 kW Installation information Required length: 1170 mm Required width/depth: 1003 mm Required height: 1197 mm Note on required space: Dimensions account for maximum travel or working lengths. Machine body length: 1170 mm Machine body width/depth: 705 mm Length: 1000 mm Width: 2000 mm Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 250 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connection voltage: 400 V Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, FS 41 Classic Tersa – Surface and Thickness Planer with TERSA Quick-Change Cutterhead System Equipped with a TERSA cutterhead for tool-free, seconds-fast knife changes The TERSA blade system enables exceptionally quiet operation Helically serrated steel feed roller for consistent and even wood feed Extra-long one-piece surfacing tables ensure accurate and easy planing of workpieces Large tilting fence can remain in its set position when opening the surfacing tables Surfacing tables open towards the rear High machine weight guarantees maximum precision and smooth running Powerful industrial motor Durable steel and cast iron construction Model: FS 41 Classic Tersa Article no.: 5503414 Technical Specifications --- Surfacing Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. cutting depth: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./Max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter / knives: 72 mm / 3 pcs Cutterhead speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa Cutterhead System No more adjustment or screwing Knife change in seconds Self-locking Exceptionally quiet operation Safety Features Godpfxscnxayj Ab Tjkf Heavy-duty anti-kickback devices prevent workpiece kickback 3-knife Tersa cutterhead for optimal planed finish Wood Feed System Helically serrated steel feed rollers ensure consistent and even material feed without markings 13 teeth engage simultaneously for powerful feed Maintenance-free, unlike rubber feed rollers Extraction Hose Connection Extraction ports for both surfacing (1) and thicknessing (2) are oriented in the same direction Hose connection accessible from one machine side only No hose routing required around the machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Bäuerle debelinski skobeljni stroj DM 630 s podaljškom mizne površine Širina skobljanja: 630 mm Višina skobljanja: 260 mm Gkodpfx Aoxgbwujb Tef Nožna gred Centrofix Z = 3 Gumirani dovodni in odvodni valji Električna nastavitev mize z digitalnim prikazom Pogonski motor: 7,5 kW Podajanje: 7 + 14 m/min Sesalni nastavek: 160 mm Dimenzije: 1150 x 1120 x 1060 mm + podaljšek mize Teža: pribl. 1260 kg Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Gsdpfoff Hdpex Ab Tekf Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Godpfx Asqlckpeb Tskf Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Planer-thicknesser minimax fs 41es TERSA Maximum configuration for professional use. Article number 5503431 Brand Holzkraft / SCM Helical-toothed steel infeed roller for constant and uniform material feed, enabling chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for efficient planing of precious hardwoods Models equipped with TERSA cutterblock for rapid, tool-free knife changes and especially quiet operation Material feed with two selectable speeds Extra-long surfacing tables provide easy and precise workpiece alignment Work tables made of grey cast iron, annealed and stress-relieved, making them resistant to deformation and permanently flat Simultaneously rear-opening surfacing tables for minimal setup times Thicknessing table adjustment via handwheel with numeric thickness display High machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/grey cast iron construction Gkodpfx Abjlht Htj Tof Quality – Made in Italy TECHNICAL DATA Dimensions & Weights Length (product) approx. 2200mm Net weight approx. 450kg Width/depth (product) approx. 1160mm Surfacing Total table length 2200mm Fence length 1200mm Working height 905mm Fence height 150mm Max. stock removal, surfacing 5mm Chip extraction connection Suction port diameter, thicknessing: 1 x 120mm Thicknessing Thickness table length 775mm Max. working height thickness 240mm Table width 410mm Max. stock removal, thicknessing 5mm Min. working height thickness 3mm Electrical Data Main drive motor power 5kW Mains frequency 50Hz Connection voltage 400V Cutterblock Cutterblock type: TERSA Cutterblock speed 5000rpm Cutterblock diameter 95mm Max. planing width 410mm Number of knives 4 Feed Feed speed 6 / 12m/min SCOPE OF DELIVERY Planing jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Gsdpeff Hdmjfx Ab Tokf Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Bäuerle ravnalni skobeljni stroj Tip: AS 510 Leto izdelave: 1994 Nožna os: 3 noži Centrofix Širina skobljanja: 510 mm Moč motorja: 5,5 kW Pomožni prislon Zaščita nožev Fried Upravljalna plošča zgoraj Digitalni prikazovalnik Vhodna miza: 1630 mm Izhodna miza: 1220 mm Gjdpfxjxgbw Ij Ab Tskf Lokacija: na zalogi 54634 Bitburg - na voljo takoj -

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 Gkedpfopgkmwjx Ab Tsf T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterhead and planer blades – quick-change system The Tersa planer blade system allows for blade changes within seconds and provides especially quiet operation. Helically geared steel feed roller ensures consistent and even wood feed Extra-long planing tables Large planing fence can remain in place when opening the planing tables. Planing tables open towards the rear Heavy machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Gkodpebuldyofx Ab Tsf Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter/number of knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutterhead, anodized planing fence Available from stock in Bitburg - immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014,

Stanje: dober (rabljeno), Leto izdelave: 1982, Rabljeni debelinski skobeljni stroj Gebr. Martin, tip: T 42 Leto izdelave: 1982 Širina skobljanja: 630 mm Višina skobljanja: 250 mm Podajalna hitrost: 8-20 m/min Sesalni priključek: 160 mm Teža: cca 870 kg Gumirani vstopni in izstopni valji Dvo-nožni valj z ravnimi rezili Centralno mazanje Gkedpfx Aot U Rn Sjb Tef Višina skobljanja nastavljiva z ročnim kolesom Preklopno stikalo zvezda-trikot Lokacija: na zalogi 54634 Bitburg - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Gsdpopq If Djfx Ab Tjkf Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Godpfx Asff Efcjb Tjkf Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, 4-knife cutter block for optimal planing results Smooth operation thanks to precision unit and robust cast iron construction Front steel infeed roller with helical serration for optimal feed Satin-finished steel outfeed roller, optionally with rubber roller in outfeed Work table mounted on four large columns for maximum stability under all working conditions Thickness table adjustment via handwheel with numeric height indicator (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator side High-power industrial motor Stable welded steel and grey cast iron construction Equipment Details: Work Table Mounted on four oversized spindles for maximum stability in all working conditions Special lifting device ensures table position remains secure even without locking Tersa Cutter Block No more adjustment or bolting required Knife change in seconds Self-locking Exceptionally quiet Thickness Table Adjustment on S 41 elite s Via handwheel with numeric indicator, precise to 0.1 mm Dimensions and Weights Length: approx. 900 mm Width/Depth: approx. 1070 mm Weight: approx. 361 kg Dust Extraction Connection Extraction port diameter (thicknessing): 120 mm Drive Power Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Space requirement explanation: Dimensions include maximum movement paths or working lengths. Machine body length: 1040 mm Machine body width/depth: 900 mm Length: 3000 mm Width: 1600 mm Working area explanation: Please add these dimensions to the space requirement to determine the recommended clear installation area for the machine. Thicknessing Table Thicknessing table length: 423 mm Thicknessing table width: 775 mm Gksdpfx Abod Hx Hno Tsf Work height min.: 3 mm Work height max.: 240 mm Min. work length: 180 mm Max. material removal: 5 mm Electrical Data Supply voltage: 400 V Cutter Block Type: TERSA Diameter: 95 mm Number of knives: 4 pcs. Speed: 5000 rpm Max. planing width: 410 mm Feed Speed: 6/12 m/min

Stanje: novo, Leto izdelave: 2025, CASADEI PF 520 M Tersa – Jointer/planer for professional use, with 520 mm planing width and motorized adjustment of the infeed table - Oversized jointer tables made of hardened and stress-relieved cast iron Gkedpfx Aeb D Sblob Tof - Rigid steel-cast iron design for precision and durability - The robust fence is easily adjustable and offers a generous support surface - Large fence, tiltable from 90° to 45° - Fence tilt angle can be read easily from the operator's position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision unit and heavy-duty cast construction - Powerful 7.0 kW (S6) motor - Maximum operator safety with the simplest operation Scope of delivery: - PF 520 M Tersa - Tilting auxiliary fence - TX-Matic planer cutterhead guard - Reinforced main motor 7.0 kW Technical data: Total length of jointer tables: 2960 mm Planing width: 520 mm Fence dimensions: 1100 x 160 mm Fence tilt range: 90° - 45° Max. depth of cut: 8 mm Cutterhead diameter / number of knives: 120 mm / 4 pcs. Speed: 5000 rpm Motor output 400 V / 50 Hz / P2 / S1: 7.0 kW (9.0 HP) Extraction port diameter: 120 mm Weight: Location: Ex-stock Bitburg Available for immediate delivery

Leto izdelave: 2022, Stanje: novo, Thickness Planer KD410 Weight: 205 kg Voltage: 400 V – 3 phase, Power (S6) 4.4 kW / 6.6 HP Chip and dust extraction diameter: 100 mm Planer table dimensions: 600 x 410 mm Maximum planing height: 230 mm Cutterblock diameter: 70 mm Number of knives: 3 Maximum thickness per pass: 4 mm Speed: 5500 rpm Feed speed: 6 m/min Accessories: - Handwheel with readout for thickness adjustment - Tersa cutterhead Gedpfxegx T Hhj Ab Tokf Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Gsdpfx Abod Hx Hpo Tokf Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min

Leto izdelave: 2022, Stanje: novo, XSD310 400 Volt Weight: 280 kg Surface Planer Planing width: 310 mm Total length of planer tables: 1400 mm Cutter block diameter: 70 mm Gsdpfxodkl Sqo Ab Tokf Tersa cutter block Speed: 5500 rpm Planer fence dimensions: 1300 x 150 mm Tilting range of planer fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power: 4 HP Thickness Planer Thickness table dimensions: 430 x 310 mm Thicknessing pass-through height: 230 mm Infeed roller diameter: 30 mm Feed speed: 6 m/min Accessories: Tersa cutter block Handwheel adjustment of thicknessing table with mechanical indicator Location: In stock at 54634 Bitburg Machine is on display at our showroom and available immediately.

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed Gkodpfx Absqlclbj Tof • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -