Agregat

Cummins 4B3.9-G12 - 33 kVA Generator - DPX-19830.1

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.470 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 230 l, barva: bež, moč: 27,21 kW (37,00 KM), Izhodni tok: 47 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 17 kW (23,11 KM), nazivna (navidezna) moč: 22 kVA, neprekinjena moč: 20 kW (27,19 KM), neprekinjena (navidezna) moč: 20 kVA, skupna dolžina: 2.800 mm, skupna širina: 1.063 mm, skupna višina: 1.703 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Cummins, vrsta hlajenja: voda, AVS Diesel Generator Set DW 20 CU 15 AK14A PRP Power Output: 16 kW / 20 kVA ESP Power Output: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Level: - Speed: 1,500 rpm Mechanical governor Operating Voltage: 12 V Cooling: water-cooled Alternator: Stamford PI114D Voltage: 400/231 V Control Panel: InteliLite AMF Type: Canopy design; weatherproof, sound-attenuated • Emergency stop switch Isdpfowu D Unsx Adkstd • Radiator with mechanical fan • Base frame construction with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency regulation according to ISO 8528-5 • Unit intended for stationary use only Please note that, according to current EU regulations, these generator sets are not approved for mobile use. These units are sold as B-grade goods. B-grade means the generators may have cosmetic imperfections such as minor surface rust or rust on the housing. However, these defects in no way affect the functionality or performance of the units. By accepting this offer, you explicitly acknowledge the described characteristics and the associated condition of the generator sets.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, Brand: Pramac GWB 22 Y CDS Soundproof Canopy: 64 dB(A) at 7m Continuous Power Output: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel Engine: Yanmar 4TNV88 BIPGE Emission Standard: STAGE V Cooling System: Water-cooled Cylinders: 4 in-line Displacement: 2190 cm³ Aspiration: Naturally aspirated Speed: 1500 rpm Engine Regulation: Mechanical Electric Start Fuel Consumption at 3/4 Load: 3.87 litres/hour Fuel Consumption at Full Load: 5.17 litres/hour Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Itjdpfsq A U Axex Adked Number of Poles: 4 Regulation: Electronic (AVR) Manual Control Panel: - Key Start - Voltmeter, Ammeter, Hour Meter - Engine Fault Indicator Sockets: - 1 x Schuko 220V - 2 x CEE 16A - 230V - 1 x CEE 16A - 400V - 1 x CEE 32A - 400V Dimensions: Length: 1645 mm Width: 870 mm Height: 1072 mm Tank Capacity: 51 litres Weight: approx. 560 kg Lifting Eye Forklift Pockets

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9673240, širina brušenja: 1.100 mm, moč: 15 kW (20,39 KM), vrsta nastavitve višine: električni, dolžina brusnega traku: 1.900 mm, priključek za stisnjen zrak: 6 letvica, širina brusilnega traku: 1.120 mm, Combined sanding unit with contact roller and air sanding shoe Brush roller Pneumatic sanding belt tensioning, motorized thickness adjustment Technical data: - Max. working width: 1100 mm - Max. workpiece thickness: 150 mm - Min. workpiece thickness: 3 mm - Sanding belt dimensions: 1900 x 1120 mm - Feed speed: 5/10 m/min - Main sanding aggregate motor power: 15 kW - Height adjustment motor power: 0.50 kW - Feed belt motor power: 0.5/1.0 kW - Operating pressure: 6 bar - Air consumption: approx. 20 l/min - Extraction connection: 2 x 200 mm Iedpfx Adjtppzvekotd - Weight: approx. 2100 kg - Machine width: approx. 1750 mm - Machine depth: approx. 1700 mm - Machine height: approx. 1900 mm

Leto izdelave: 2023, stanje: novo, * Year of manufacture: 2023 (new unit) * Prime power (PRP): 32 kVA / 26 kW * Rated standby power (ESP): 33 kVA / 26 kW * Rated voltage: 400V * Rated frequency: 50Hz * With terminal strip (without external sockets) * Dimensions: 2,225 x 970 x 1,185 mm (L x W x H) - Weight without fuel: 137 kg Iedsl Iyyuspfx Adketd

Stanje: novo, FORKBERG Pallet Truck – New Manual Hand Pallet Jack The FORKBERG pallet truck is a manual hand pallet jack designed for efficient handling of loads up to 2,500 kg. It is perfectly suited for use with the most common Euro pallets. The robust design, precise construction, and manual hydraulic pump ensure reliable performance even under intensive use in warehouses, wholesale outlets, logistics centers, or production facilities. Engineered for environments where every centimeter counts – ideal for narrow aisles, retail stores, cold storage, or delivery vehicles. Fitted with polyurethane (PU) wheels and rollers for quiet, smooth operation and superior abrasion resistance. Key Features of the FORKBERG Pallet Truck: • 2,500 kg load capacity – safe and efficient transport of heavy pallets and loads. • Sturdy integrated frame – durable mechanical joints: wheel connectors, rockers, and lever arms for maximum strength. • Ergonomic A-type handle – convenient, intuitive operation even during heavy-duty use. • Powder-coated chassis in RAL3028 – enhances visibility and workplace safety, and makes equipment identification easier. • Heavy-duty hydraulic unit – 18 self-lubricating bearings ensure long service life and trouble-free operation. Offer applies to FORKBERG Pallet Truck: Item code: MTP004727 Minimum fork height (cm): 8 Maximum fork height (cm): 20 Fork length (cm): 115 Overall length (cm): 153 Fork width (cm): 16 Fork spacing (cm): 54 Roller dimensions (cm): 8x7 Itjdswxtmzopfx Adkjd Steering wheel diameter (cm): 20 Wheel type: NTN Load capacity (kg): 2,500 Net price – €199 per unit Offer applies to FORKBERG Pallet Truck: Item code: MTP004726 Minimum fork height (cm): 8 Maximum fork height (cm): 20 Fork length (cm): 115 Overall length (cm): 153 Fork width (cm): 16 Fork spacing (cm): 54 Roller dimensions (cm): 8x7 Steering wheel diameter (cm): 20 Wheel type: VTV Load capacity (kg): 2,500 Net price – €209.00 per unit Offer applies to FORKBERG Pallet Truck: Item code: MTP004728 Minimum fork height (cm): 8 Maximum fork height (cm): 20 Fork length (cm): 80 Overall length (cm): 118 Fork width (cm): 16 Fork spacing (cm): 54 Roller dimensions (cm): 8x7 Steering wheel diameter (cm): 20 Wheel type: VTV Load capacity (kg): 2,500 Net price – €219 per unit Special Offer – BUNDLE of 6 UNITS at a special price. Offer applies to FORKBERG Pallet Truck: Item code: MTP004726/SET Net price – €1,139 per bundle Bundle includes 6 units. Package dimensions: 220x60x75 cm Bundle weight: 450 kg Offer applies to FORKBERG Pallet Truck: Item code: MTP004727/SET Net price – €1,119 per bundle Bundle includes 6 units. Package dimensions: 220x60x75 cm Bundle weight: 450 kg Offer applies to FORKBERG Pallet Truck: Item code: MTP004728/SET Net price – €1,199 per bundle Bundle includes 6 units. Package dimensions: 200x60x75 cm Bundle weight: 400 kg * Large quantities available. * Delivery possible throughout Europe. * Prices do not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Isdpfxodkdi Ts Adkjtd Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 69.000 h, Funkcionalnost: omejena funkcionalnost, moč: 625 kW (849,76 KM), vrtljajska hitrost (min.): 1.500 obr/min, vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, delovne ure: 69.000 h, Motor z generatorjem je demontiran iz obstoječega kontejnerja. Prodaja se samo motor z generatorjem in pripadajoča krmila omara. Vsi servisi so bili redno izvedeni s strani Jenbacher serviserjev, saj smo imeli sklenjeno vzdrževalno pogodbo. Zadnji cečji servis je bil opravljen pri 50.000h, menjana je bila tudi turbina. Isdpfx Adsw Dn Spekjtd Je v dobrem stanju, shranjen v skladišču.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2198535, skupna masa: 2.409 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: rdeča, moč: 160 kW (217,54 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 160 kW (217,54 KM), nazivna (navidezna) moč: 220 kVA, neprekinjena moč: 160 kW (217,54 KM), neprekinjena (navidezna) moč: 220 kVA, skupna dolžina: 3.300 mm, skupna širina: 1.200 mm, skupna višina: 1.970 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: FPT/Iveco, vrsta hlajenja: voda, poraba goriva (kombinirana): 42,1 l/100 km, poraba goriva (mestna vožnja): 24 l/100 km, poraba goriva (izven mesta): 32,87 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 600 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 12 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 1.970 mm, dolžina elektro omare: 3.300 mm, širina krmilne omare: 1.200 mm, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 200 KVA generator is a reliable and versatile solution for temporary and long-term power requirements in a wide range of environments. This genset is ideal for mobile use and complies with Stage V emission standards. The efficient FPT/Iveco engine, combined with a Stamford generator, delivers outstanding performance with low operating costs. The generator is housed in a sound-insulated enclosure that ensures minimal noise emissions, making it perfect for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external sockets with circuit breakers for added safety. With a 600-litre fuel tank, the generator offers an autonomy of up to 14 hours under continuous load. The system operates on diesel, HVO or GTL fuel, providing flexible fuel options. Technical Specifications: - Model: Bredenoord 200 KVA - Nominal Power: 220 KVA - Maximum Power: 220 KVA - Engine: FPT/Iveco NEF67TM7 - Generator: Stamford brushless alternator (AVR) - Output: 220 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 68 dB(A) at 7 metres - Fuel tank: 600 litres - Autonomy: - 100% PRP: 14 hours - 70% PRP: 18 hours - Engine power: 160 KW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2409 kg - Emission class: Stage V Fuel consumption: - 100% PRP: 42.1 L/h - 70% PRP: 32.87 L/h - 50% PRP: 24 L/h Options: - Engine pre-heater - Battery charger - 3-way fuel valve - XXL fuel tank Sound attenuation: The generator is designed with optimised air intakes and special insulation materials to minimise noise. The sound insulation is reinforced with wool of varying thickness to dampen sound across a wide frequency spectrum, making it ideal for use in noise-sensitive areas. Durability: The enclosure is corrosion-resistant thanks to a coating tested for more than 2000 hours (C5I-H), guaranteeing a long service life even in the most challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree bevel to prevent water accumulation and minimise oxidation. Transport and Handling: The generator is easy to move thanks to reinforced lifting eyes and steel beams, ensuring straightforward transport on construction sites. The design provides a stable and secure relocation without risk of damage. Customisation: The Bredenoord 200 KVA generator is available in various outputs from 20 KVA to 600 KVA. Customer-specific adaptations are possible, allowing the generator to be tailored to specific requirements and applications. Certifications: - CE certified Iodpfx Aewf Nkcsdkjtd - Made in Europe Fields of Application: The generator is suitable for various sectors, including construction, industry and other areas where reliable and efficient power supply is required.

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: bež, moč: 513 kW (697,49 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 408 kW (554,72 KM), nazivna (navidezna) moč: 510 kVA, neprekinjena moč: 368 kW (500,34 KM), skupna dolžina: 4.460 mm, skupna širina: 1.606 mm, skupna višina: 2.493 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Doosan, vrsta hlajenja: voda,

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Itsdsxpn T Ujpfx Adked Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)