Koordinatni merilni stroj

Coord3 / METRIS KRONOS 30-50-13

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories Hnjdet Hw Nyjpfx Abxen • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Hnsdpfjifn N Nox Abxen Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 1.000 mm, Measuring ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld terminal: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe change system: Renishaw (Price REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Original year of construction: 2014, modernized in 2017 and 2025 Hnjdjdv I Abepfx Abxen Exchange for another CMM possible

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Control system: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tooling System Turning tools (12x12x130): 5 Tool holder / Cut-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, tailstock (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specifications Footprint (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Hodpjxf Hqqefx Abxonn Input power: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x driven tools for rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 loading magazine - Option for long parts - Spindle flushing (Scherzinger pump)

Stanje: rabljeno, Technical details: Swing diameter: 626 mm Turning length: 3000 mm Turning diameter: 600 mm Spindle bore: 100 mm Spindle speeds: 2800 rpm Machine weight approx.: 18 t Machine overhauled in 2003 and equipped with Siemens 840 D Hodpfsvgmimex Abxsnn - NC steady rest - Power chuck 400 mm - 12-station turret

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 46650051, Horizontal machining centre with multipallet system + B39 NIIGATA SPN 501-P8 FANUC 18I-MB Hsdpfx Abogay Evjxjnn Accessories: Chip conveyor High-pressure coolant system through the spindle line

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Max. swing over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: Hjdpfjuddimox Abxjnn - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Hnsdod N H A Nspfx Abxen Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, premer struženja nad prečnim suportom: 925 mm, stružna dolžina: 2.800 mm, premer struženja: 1.200 mm, izvrtina vretena: 132 mm, največja hitrost vretena: 2.000 obr/min, Siemens 840D CNC 48-position tool changer with Capto C8 tools Chip conveyor Forkardt 400 mm chuck 2 SMW Autoblok hydraulic steadies Hnedpfx Abjwzyn Rsxsn Capacity: 2,800 x 1,250 mm Spindle bore: 132 mm Weight: 23,500 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Baty SM350 Profile Projector – Powerful Inspection for Demanding Applications Hedpfouyh Rpjx Abxjnn The Baty SM350 is a high-end profile projector featuring a 350 mm screen and a robust, precision-machined stage with a measuring range of 250 mm x 125 mm. It is ideal for high-precision optical inspection in environments where reliability and accuracy are of utmost importance. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands the functions to include geometric measurements, such as calculation of angles, radii, and distances. It also enables the creation of tolerance reports. FT2: The most advanced version features a touchscreen interface with Fusion 2D software. This variant includes optical edge detection and comprehensive reporting capabilities, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret that allows for rapid and effortless switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also delivers advanced measurement capabilities such as edge detection and DXF overlays. These features make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing environments.