Kotel

COMPTER CFC 1000

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction. Isdpjh Ayyqsfx Adkjtd

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Ijdpfxswtgcxj Adkotd Fusing: 25 A Condition: used

Leto izdelave: 2001, obratovalne ure: 123 h, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Iedoftdv Uepfx Adkstd Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Uporabljena balansirna naprava Schenck HU 9 T z rabljeno merilno enoto CAB 690 H. Itedpfx Ajw Aaugedkod Stroj je opremljen z originalnimi temeljnimi risbami, dokumentacijo in navodili za uporabo. Stroj je mogoče preizkusiti v Keravi. Tehnični podatki: - Največja teža rotorja z valjčnimi ležaji: 50.000 kg - Največja masa za simetrični rotor: 56.000 kg - Nosilnost posameznega ležajnega stojala: 28.000 kg - Nosilnost posameznega utornega stojala (T-utora): 28.000 kg - Najmanjša masa rotorja: 2.500 kg (1.000 kg) - Največji premer nad ležiščem stroja: 4.000 mm - Dolžina strojne postelje: 15.000 mm - Nastavljivi premeri valjčnih ležajev: 125–270 mm, 450–900 mm - ABB električni pogon, FC: 90 kW - 4-stopenjski menjalnik: pribl. 120–1.400 min⁻¹ (vrtljajev/min) - Pnevmatska blokada za pogon na koncu - Električno upravljana pomična stojala - Natančnost: Umar 0,5 gmm/kg pri 270 vrt/min, 1.000 gmm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1991, Torwegge multi-blade saw Chain width: 250 mm Itedpfxsucnuks Adkod Cutting height: 100 mm Total connected load: 39 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viessmann Vitoplex 700 kW Year: 2014 Model: SX2A Output: 700 kW Inspection by prior telephone arrangement only! Preferred sale to dealers, commercial operators, or for export. All information is provided without guarantee; subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typographical or data transmission errors. Isdpetu T I Uefx Adketd Naturally, we will also handle all formalities. Loading possible Request more information

Leto izdelave: 1993, stanje: zelo dobro (rabljeno), 2 kosu centrifugalnih črpalk Proizvajalec: KSB Model: WKF 50/7 Pretok: 5,5 l/s (19,8 m³/h) Dvižna višina: 214 metrov (21,4 bar) Maks. temperatura: 130°C Tesnilo: Mehansko tesnilo z priključkom za zaporno vodo Elektromotor: VEM Iedpfx Aoibwaredkotd Pogonska moč: 30 kW Hitrost vrtenja: 2935 obr/min ! Cena na kos !

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Itjdpfx Ajh Eld Ejdkod Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Stanje: rabljeno, SPE Renergi nizkotemperaturni sušilnik. Renergi sušilnik se uporablja za sušenje žagovine in drugih materialov za proizvodnjo biogoriv. Sušilnik lahko suši žagovino, lubje ali lesne sekance, zmanjšujoč vsebnost vlage približno s 50 % na približno 10 %. Ta nizkotemperaturni sušilnik uporablja toplo (ali vročo) vodo s priporočeno temperaturo od 65 °C naprej. Najvišja temperatura vode: 110 °C. Varnost napajanja: Sušilnik sme biti priključen izključno na trifazno omrežje 3x400 V AC (630 A), 50/60 Hz, z ločenim zaščitnim ozemljitvenim vodnikom. Podatki o napajanju: • Napetost: 400 V AC, trifazno • Priporočene varovalke: največ 3x630 A Iodpfx Aowp Rqfedkotd • Tipična poraba energije: 200 kW Dimenzije sušilnika so cca 17,4 x 5,7 m, višina 10,7 m. Potrebna talna površina znaša približno 21,4 x 8,0 m. Višina stropa naj bo vsaj 15 m (oziroma 4 m nad vrhom dovoda materiala). Dovod zraka: Za obratovanje naprave je potreben dovod vsaj 24 kg/s svežega zraka (kar ustreza 20 nm3/s ali 72.000 nm3/h). Pretok zraka: največ 200 l/min Tlak zraka: najmanj 4,5 bar, priporočljivo 6,0–8,0 bar Vodni dovod: topla voda, pretok 32 dm3/s Tlak vode: najmanj 1,5 bar, največ 6,0 bar Obratovalno temperaturno območje: • Temperatura dovedenega zraka: -20 °C do +50 °C • Relativna vlažnost: 0 % do 60 % Surovina/material: • Relativna vlažnost: 45–55 % (teža) • Zahtevana vlažnost po sušenju: 8–15 % Zmogljivost: • Dvo-celični sušilnik širine 4 m lahko praviloma obdela 2.400 kg materiala z vsebnostjo vlage 55 % v vsaki seriji • Sušilnik lahko posuši 6.000 kg surovine (od 55 % na 10 % vode) v eni uri SRE sušilnik je izdelan skladno z evropskimi direktivami in ustreza zahtevam: • Direktiva o strojih 2006/42/ES • LVD 2006/95/ES • EMC 2004/108/ES Sušilnik se nahaja v občini Straupe, okrožje Cēsis, LV-4152, Latvija. Ogled je možen ob delavnikih od 8.00 do 17.00, predhodno po dogovoru. Sušilnik je že demontiran. Na voljo so vsi električni shematski prikazi, navodila za uporabo in servisna dokumentacija. Po dogovoru zagotovimo kontakt z uporabnikom tovrstnega sušilnika za strokovno svetovanje. Cena: 20.000,00 EUR (DDV ni vključen)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 160 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only exhibition unit available in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speeds up to 18 m/s Isdpewcqr Ajfx Adketd - Table extensions at infeed and outfeed - Industrial PC 15.6" - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration return roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (bored) for connection of the vacuum blower - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air jet pipe - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.