CNC stružnica

Comev Leonardo CM 300x2000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 40.255 h, Funkcionalnost: popolnoma funkcionalen, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in travelling column design. The machine was built in 2008 and underwent a complete retrofit in 2022, featuring an upgrade to Siemens Sinumerik 840D Solution Line. Equipped with: - 5-axis simultaneous operation license - Siemens Sinamics drive technology - Siemens OP15 Black Operator Panel - MCP control panel and electronic handwheel Dedpfx Acjyuzg Hsdjwa Technical Specifications: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Type: 5-axis universal machining center / travelling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Retrofit / Modernization: Siemens CNC & drive retrofit 2022 5-axis simultaneous operation: license available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V Power-on hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X axis: Siemens Sinamics 160 A, 2x SMC20 encoder module Y axis: Siemens Sinamics 50 A, 2x SMC20 encoder module Z axis: Siemens Sinamics 80 A, 2x SMC20 encoder module B axis: Siemens Sinamics 25 A, 2x SMC20 encoder module A axis: Siemens Sinamics 25 A, 2x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: - 5-axis simultaneous operation license - Axis licenses - Operator software license Equipment: - Integrated rotary table / swiveling bridge structure - Paper tape filter system - Coolant / filter unit - Electrical cabinet - Full enclosure - Work area lighting - Siemens operator console Condition: - Machine is in well-maintained condition - Upgraded Siemens control and drive technology - 5-axis simultaneous operation available

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Dsdpfxsgyy I Ao Acdswa Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, X-travel 2,500 mm Y-travel 3,000 mm Z-travel 1,250 mm Control HEIDENHAIN iTNC530 Spindle speeds – stepless up to 22,000 rpm C-axis ±300° Swiveling head ±110° Tool holder HSK 63 A Tool changer with 50 positions Total power requirement 130 kW Machine weight approx. 53.5 t Installation dimensions approx. 7.6 x 7.3 x 5.7 m This ZIMMERMANN FZ33c is immediately available and in good condition. – NEW spindle installed 6 months ago Description: Technical specifications of the system and working areas X-axis 2,500 mm Y-axis 3,000 mm Z-axis 1,250 mm A-axis ±110° C-axis ±300° Dsdpfx Acjzak Hgedowa Including vibration sensor Including bearing temperature sensor Including rotary feedthrough for internal high-pressure coolant (IKZ) 5-axis path control: Heidenhain iTNC 530/manual pulse generator HR520, 15" TFT color display Extraction system LTA Industrial Air Cleaning Machine enclosure roofing Tool changer 50 positions, chain magazine, rear of the machine Chip conveyor, discharge 60° left, front end Probe not included!!! Blum laser tool measurement "Control NT-Micro" Clamping table Length x Width x Height: 2,500 x 3,250 x 400 mm Table load 8,000 kg/m² (max. 16,000 kg) T-slots, longitudinal 18H12 T-slot spacing 250 mm Dimensions and Weights Required space (without peripherals): approx. 7,600 x 7,300 x 5,650 mm Total weight approx. 53,500 kg Electrical specifications Voltage (three-phase): 400 V Frequency: 50 Hz Compressed air connection (on-site) Required pressure: 6 bar Average air consumption: approx. 15 m³/h (depending on machine equipment) Linear axes drives Rapid traverse X, Y, Z axes: 60 m/min Axis acceleration X, Y, Z axes: up to 5 m/s² Rotary axes drives – VH30 Rapid traverse A, C axes: 360 °/s Axis acceleration A, C axes: 700 °/s² Resolution A, C axes: 0.0001 Linear axes accuracy – according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Y-axis P = 0.028 mm Z-axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y-axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Measurement system resolution (interpolated) A, C axes: 0.0001° Rotary axes accuracy – VH30 Positioning accuracy A, C axes P = 12" = 0.0033° Repeatability A, C axes Ps = 8" = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% duty cycle): 60kW Spindle speed: 22,000 rpm, 95 Nm, HSK-A63 External fork head dimensions L x W approx. 500 x 600 mm Nominal torque rotary axes closed-loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Grease-lubricated for life with automatic re-lubrication system) Swivel axis – spindle nose: 326 mm Tool holder: HSK 63 A Tool clamping: spring clamp Tool release: hydraulic Admissible tool weight: 4.5 kg (manufacturer specification) Coolant supply external and internal Coolant/lubricant delivery (emulsion) at the face of the milling spindle with band filter system Capacity 1,500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar Blow air at the face of the milling spindle

Stanje: dober (rabljeno), potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 800 mm, obremenitev mize: 12.000 kg, skupna višina: 3.900 mm, skupna dolžina: 7.200 mm, skupna širina: 5.200 mm, dolžina mize: 1.800 mm, širina mize: 1.600 mm, hitrost pomika os X: 8.000 m/min, hitrost podajanja osi Y: 8.000 m/min, hitrost podajanja os Z: 8.000 m/min, največja hitrost vrtenja: 2.000 obr/min, Namizna vrtalno-rezkalna naprava TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Proizvajalec: TOS VARNSDORF Tip: WHN 13 CNC Krmiljenje: Heidenhain TNC415 X-os: 3500 mm Y-os: 2000 mm Z-os: 800 mm W-os: 1000 mm Dolžina mize: 1800 mm Dwodsy H Dahopfx Acdoa Širina mize: 1600 mm Obremenitev mize: 12 t Hitrost vrtenja: 2000 obr./min Moč: 37 kW Vpenjanje orodja: ISO50 ISO/Bt/Mk Pomik X-os: 8000 mm/min Pomik Y-os: 8000 mm/min Pomik Z-os: 8000 mm/min Pomik W-os: 8000 mm/min Dolžina: 7200 mm Širina: 5200 mm Višina: 3900 mm Teža: 34.500 kg Prosimo, upoštevajte: Podatki na tej strani so bili po naših najboljših močeh pridobljeni od nas in kjer je mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar za točnost ne moremo jamčiti. Zato ne predstavljajo nobenih zagotovil ali pogodbenih pogojev. Priporočamo, da pred nakupom preverite vse pomembne podrobnosti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 800 mm, obremenitev mize: 25.000 kg, premer vretena: 132 mm, največja hitrost vretena: 2.500 obr/min, skupna višina: 50 mm, skupna dolžina: 80 mm, skupna širina: 50 mm, dolžina mize: 2.000 mm, širina mize: 1.750 mm, dolžina pomika os W: 10.000 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, največja hitrost vrtenja: 2 obr/min, pomik osi W: 800 mm, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 10 m/min, teža obdelovanca (maks.): 25.000 kg, moč: 37 kW (50,31 KM), REM CPAF 132 | CNC Tischebohr- und Fräsmaschine | Fanuc 31i-A Voll funktionsfähige CNC-Horizontalbohrmaschine – hergestellt von REM Bacau (2016), generalüberholt und modernisiert in 2022. Maschine läuft unter Strom und steht zur sofortigen Besichtigung bereit. FRÄS- & BOHRKOPF: • Bohrspindeldurchmesser: 132 mm • Spindelaufnahme: ISO 50 • Drehzahlbereiche: 2 • Spindeldrehzahl: 0–2.500 U/min • Werkzeugspannung: Automatisch • Hauptantriebsleistung (S1): 37 kW RUNDTISCH: • Abmessungen: 1.750 × 2.000 mm • Indexierung: 360.000 × 0,001° • Indexiergenauigkeit: 6 Bogensekunden • Max. hydrostatische Belastung: 25.000 kg VERFAHRWEGE: • X (Querschlitten): 2.500 mm • Y (Schlittenstock): 1.600 mm • Z (Spindel): 800 mm • W (Ständervorschub): 1.100 mm VORSCHÜBE: • X/Y/Z-Arbeitsvorschub: 2–10.000 mm/min • W-Arbeitsvorschub: 2–6.000 mm/min • B-Achsen-Vorschub: 0,025–3 U/min • Kugelgewindetriebe auf allen Linearachsen Dodjrwx U Iopfx Acdewa CNC-STEUERUNG: Fanuc 31i-A Hinweis: Neue teleskopische X-Achsen-Abdeckungen erforderlich (Preis angepasst). Maschine läuft unter Strom – Besichtigung jederzeit möglich. Hergestellt von REM Bacau – Rumänien. Weltweiter Export. Kontaktieren Sie uns für vollständige Spezifikationen und Preise.

Stanje: pripravljen za uporabo (rabljen), Prodam dobro ohranjeno rezkalno stroj Mikron VC 1000 zaradi nakupa novega stroja. Dedpfx Acsh Tnpxsdjwa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, 1 kos rabljene CNC ležiščne rezkalne stroje z upravljalnikom Heidenhain. Dwedewxxzqjpfx Acdsa Dodatno rotacijska miza Rotacijska miza ima premer 1200 mm. 220.000 € leto 2012/2013 predelano z novo popolno rotacijsko mizo Rexroth, vgrajena kot C-os. Naklonska glava je na voljo. Priložena je velika količina orodij in 3D-merilna sonda.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 3.220 mm, pomik osi Y: 800 mm, pomik po osi Z: 600 mm, število mest v zalogovniku orodij: 55, skupna višina: 3.600 mm, skupna dolžina: 7.500 mm, skupna širina: 4.200 mm, skupna masa: 15.500 kg, dolžina mize: 3.900 mm, širina mize: 750 mm, model krmilnika: Heidenhain, razdalja od središča mize do nosu vretena: 720 mm, moč vretenovega motorja: 35 W, hitri pomik na osi Z: 40 m/min, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, največja hitrost vretena: 18.000 obr/min, hitrost vretena (min.): 30 obr/min, obremenitev mize: 3.500 kg, premer orodja: 80 mm, dolžina orodja: 330 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Mobile column vertical machining center "HEDELIUS model CB80 MAGNUM" with Heidenhain TNC-530 Dsdev Sdc Uopfx Acdjwa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 8.155 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.800 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 1.000 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 50 obr/min, širina mize: 850 mm, dolžina mize: 2.000 mm, skupna masa: 13.500 kg, moč: 30 kW (40,79 KM), CME FS-2 Bettenfräsmaschine mit nur 8.155 Betriebsstunden Dodpoquqq Asfx Acdswa Steuerung: Heidenhain 426B inklusive Messtaster und komplettem Satz an Handbüchern

Stanje: rabljeno, Leto izdelave: 2004, Technical Details: X-axis travel: 1500 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1st gear: 30 to 930 and 2nd gear: 930 to 4000 / stepless rpm Tool holder, horizontal/vertical: SK 50 (DIN 69871 / DIN 69872 Form A) Spindle torque: 1000 Nm Swiveling spindle head left and right: 90° Dwsdpfsu Nc Risx Acdea Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Table clamping area (L x W): 1600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. (LxWxH): 3.1 x 4.7 x 2.6 m Cooling filter dimensions: 1.9 x 1.6 x 1.4 m Required floor space approx. (LxWxH): approx. 38.5 m² Applications: Milling, drilling, tapping, boring with direct encoded linear measuring systems The guides of all 3 axes are boxways Milling head positioning controlled +/-90° Internal and external coolant supply Milling spindle rated motor power: 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high-pressure pump 60 bar (internal coolant supply), nominal flow rate 20 l/min, and low-pressure pump 4 bar (external coolant supply), as well as spray gun Compact belt filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO