DVOJNO VRETENO Z VRTLJIVIM BOBNOM

COMEC MANGUSTA

Stanje: novo, Pre-bending: 13.0 mm Working length: 3100 mm Plate thickness: 16.0 mm Total power requirement: 17.5 kW Approx. weight: 11,600 kg Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Maximum opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torsion shaft Fodpfx Afed Auacjlepb • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes on cone rolling: • The maximum sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: Fpedpshzbipjfx Aflob 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: rabljeno, Leto izdelave: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speeds: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev cross: 0.025 - 0.376 mm/rev Fedpfx Afovav Sdoljpb Spindle bore diameter: Ø 42 mm Tailstock taper (ISO): MK4 Tailstock quill stroke: 180 mm Total connected load: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions approx. (LxWxH): 2.4 x 1.0 x 1.7 m The lathe does not feature rapid traverse. Positioning via 2 axes Display via Pinacho Lathe Controller Multifix quick-change tool post with turning tool Coolant system Foot switch Thread cutting possible (metric, Whitworth, module, pitch)

Stanje: rabljeno, D-6886-Delford Type SP 800 Fjdpfx Ajc Nlxpjflspb Delford SP800, folieviklingsmaskine, emballeringsmateriale: strækfilm 12,5–25 mikron (50-100 gauge) PVC eller andre egnede varmeforseglbare folietyper. Maks. rullebredde: 450 mm, maks. rulle diameter: 250 mm. Arbejdshastighed: 40–80 pakker pr. minut. Maks. pakkestørrelser: L 300 mm, B 200 mm, H 120 mm, omkreds 420 mm. Min. pakkestørrelser: L 130 mm, B 90 mm, H 10 mm, omkreds 200 mm. Maskindimensioner: 5290 x 1049 x 1430 mm. Maskinvægt: ca. 1.400 kg.

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Fpedpfergahxex Aflsb

Leto izdelave: 2019, Stanje: novo, Preparation of a written offer / cost estimate for a powder coating system by Romer. Fedpjc Sd D Sefx Aflopb

Stanje: rabljeno, številka stroja/vozila: 4131, Comm. No. Lg 34422 High-performance punching press BRUDERER BSTA 60 H From ongoing production. Stroke adjustment requires repair. Without soundproof enclosure and without strip feeding line. Feeder BBV 202/120 Fjdpfxoinzdls Afljpb

Stanje: skoraj kot novo (rabljeno), Profile grinding machine Utma model P20 Fsdpfx Afeff H E Rolepb

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Multispindle lathe Schütte AG20 Fsdpfx Afehrihyjljpb

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - 8-OSNI CNC STRUŽNICA S FREZALNO GLAVO, SPODNJO REVOLVERSKO GLAVO IN PROTIVRETENOM MAKS. PREMER VRTLJANJA: 660 mm MAKS. DOLŽINA OBDELAVE: 1495 mm MAKS. PREMER OBDELAVE: 660 mm PREMER PALICE: 65 mm VRETENO: 35-5000 vrt./min; 22 kW; 254 mm Fjdpfx Aow Ey R Tefljpb PROTIVRETENO: 35-5000 vrt./min; 18,5 kW; 254 mm GLAVA: CAPTO C6 ; -30°/+195° ; 15-12000 vrt./min; 18,5 kW POMIK OSI X: 580 mm POMIK OSI X2: 150 mm POMIK OSI Y: 160 mm POMIK OSI Z: 1545 mm POMIK OSI Z2: 1490 mm POMIK OSI B: 1550 mm HITRI POMIKI X-Y-Z: 38 - 26 - 38 m/min REVOLVERSKA GLAVA: 9 POZICIJ MAGAZIN ORODIJ: VERIŽNI TIP; 80 POZICIJ VISOKOTLAČNO HLADILNO SREDSTVO: 18 Bar KRMILNA ENOTA: MAZATROL MATRIX TEŽA: 11800 kg SKUPNE DIMENZIJE: 5090 x 3270 x 2830 mm DODATKI: TRANSPORTNI TRAK ODPADKOV; PAPIRNI FILTER; NAPRAVA ZA MERJENJE ORODIJ