Štirismerni bočni nakladalnik

Combilift C6000 SL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, An all-terrain four-way Combilift side loader is available. Fuel type: LPG, load capacity: 6,000 kg, load center: 600 mm, lift height: 5,552 mm, mast type: triplex, overall height: 2,845 mm, free lift: 1,600 mm, forks: 1,400 mm, valves: 3, weight: approx. 9,800 kg, operating hours: 561 h. Includes fork positioner, heater, full cab, and dual gas bottle holder. Documentation available. On-site inspection possible. Iedpfx Aownr I Njdkeap

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Leto izdelave: 1998 Lokacija: Francija, Savoja Iasdpfx Aowmm Alsdksp

Leto izdelave: 2026, stanje: novo, Mobile cleaning centrifuge including buffer tank for wastewater, agitator, and double diaphragm compressed air pump. - New machine - Numerous other versions and special designs available on request. Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing, general solid-liquid separation, coolant processing, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces in the system of over 1800 times gravity - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on expensive additives for the vibratory finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process fluids up to 70°C (optional cooling available) - Frequency-controlled motor drive for gentle acceleration and braking of the rotor Looking for innovative solutions for surface finishing and process water treatment? We offer a wide range of systems in the fields of vibratory finishing, drying, and process water technology tailored exactly to your requirements. From development to production: we supply all our products from a single source and everything is "Made in Germany." ----- Please do not hesitate to contact us, we are happy to assist you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place electronically (email, fax, phone, messaging portal), where we first provide you with a non-binding quotation, and at the same time inform you about our general terms and conditions, right of withdrawal, and legal notice before any purchase/contract is concluded. Iedpjf Sqfqefx Adkeap

Stanje: rabljeno, Leto izdelave: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of Delivery • 1 set of armored shafts HW 8/10 with comb scrapers and re-breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and re-breaking bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine output: approx. 566 kW (approx. 770 HP) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked chassis, hydraulically driven Applications: scrap, commercial waste, bulky waste, mixed waste, wood, recyclables — Condition: • Well-maintained machine • Fully operational Iodpfxex Nkhqs Adkjap • Sale as inspected on-site Additional Information / Service History The machine has always had a full maintenance and service contract directly with Lindner. All maintenance and service work has been performed professionally according to manufacturer specifications and documented. Notes: • Sale is without any warranty or guarantee. • No returns or renegotiation. • Subject to prior sale. All details are provided without guarantee. The seller accepts no liability for any errors, incompleteness, or changes to the information provided. The sale is exclusively subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2004, IMAMO 24 TAKIH REZALNIKOV, PRI NAKUPU VEČ KOSOV LAHKO PONUDIMO PAKETNO CENO Tip: EH 400/1 Serijska številka: 901 Leto izdelave: 2004 Napetost/frekvenca: 400 V/50 Hz Nazivna moč: 3 kW CE certifikat: Da 🛠️ Opis naprave Industrijski rezalnik ali mlin (rezalnik/granulator). Vidne lastnosti na slikah: Isdoxapr Hspfx Adkeap Sistem z vrtečimi rezili (rezalna enota) na 2 mm osi 3 kW SEW motor z reduktorjem 8 mm sito (označeno kot ‘8 mm sito’) – določa velikost izhodnih delcev Mobilna in transportna zasnova Kontejner za izpust materiala in spodnji motorni sistem Stroji te vrste se običajno uporabljajo za drobljenje naslednjih materialov: Plastika Guma Les Ostružki lahkih kovin Elektronski odpadki

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, Naprodaj je kot nova škarja za staro železo, ki si jo je mogoče kadarkoli ogledati v obratovanju. Iodpeykzuijfx Adkeap

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 8x4 (2,4 x 1,2 m) dvonadstropno sito 2,2 kW pogonski motor Teža: 1800 kg Dolžina: 5000 mm Širina: 2000 mm Višina: 2300 mm 4,5 m transportni trak za fine delce 3 kW pogon z menjalnikom Iajdpfx Asin E Hqedkep 8,5 kW bencinski vgrajeni generator Kmetijska ali cestno legalna kolesa Možna je dostava po vsem svetu, ponudbe trgovcev dobrodošle,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, številka stroja/vozila: SY008CE0693K8, Year of manufacture: 2024 Engine power: 73 HP (53.7 kW) Operating weight approx. 8,800 kg Yanmar engine, Stage V, approx. 73 HP, 202 Nm, 3,319 cc Load-sensing hydraulics, max. 185 l/min 1st proportional auxiliary control circuit (pressure/return/hammer) on joystick 1 2nd proportional auxiliary control circuit (grapple) on joystick 2 Safety load-holding valves for dipper arm and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Iaedpsv Nix Aofx Adksp Cylinder protection on arm Bucket breakout force ISO 56 kN Arm tear-out force ISO 38 kN Operator cab ROPS Adjustable boom, dipper arm 2,050 mm Dozer blade Rubber tracks 450 mm Battery main switch Travel alarm and beacon Engine emergency stop LED work lights 2x on roof LED work light 1x on boom 12V socket Document compartment Radio with speaker

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 5 kW (6,80 KM), vrsta goriva: električni, lastna masa: 4.200 kg, Leto izdelave: 2024, fill hopper with trough hopper capacity 10.5m³ Iaedpfeuqynmjx Adksp S355 / St52-3 vibrating chute with 10mm Hardox 450 wear plate chute fully stress-relieved annealed 2 x unbalanced motors 2.5kW each NEW

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device Isdpfxeq Sc Aus Adkeap - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.