Sredinski stružnica in stružnica za vreteno

COLCHESTER STUDENT 2500VS

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1962, številka stroja/vozila: 7867/162, Funkcionalnost: popolnoma funkcionalen, Power supply: 400V, 4.0 kW Extraction connection: 1x Ø 100 mm, 1x rectangular 300x140 mm Spindle diameter: 30 mm Height adjustable via handwheel Spindle brake via cable pull Spindle locking via locking pin Forward/reverse rotation 2 speeds Spindle not tiltable Dimensions (LxWxH): 1060 x 960 x 1100 mm Weight approx. 650 kg Bljdeh Ux Rwepfx Agtog Unfortunately, we cannot respond to inquiries without complete contact details.

Stanje: novo, Swing diameter: 400 mm Turning length: 1,000 mm Speed range: 70 – 2,000 rpm Weight approx.: 500 kg Description: - Lead- and feed-screw lathe features a robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing achieved through heavily ribbed GG cast iron - Hardened and ground face spindle ensures high accuracy and durability - High material removal rates during rough machining enable production of fine surfaces and tight tolerances - Wide range of threads and feeds without requiring a gear change in the change gear compartment - Bed guideways hardened and precision-ground - Perfectly running main spindle mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic brake for the main spindle - All controls (electrical) are centrally accessible - 4-position longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA 21 - User-friendly membrane keypad, splash-proof, sealed, and anti-glare - Increased working accuracy - Reduced error rate - X, Y, Z0, and Z-axes each with 8-digit display - Glass scales Bsdpfod Eauksx Agtolg Equipment details: Feed gearbox – All gears made of steel, hardened and ground - Shafts run on needle bearings - All components lubricated in an oil bath Apron – Housing fully sealed - Safety feature to prevent simultaneous operation of threading and feed mechanism Tailstock – Hardened and ground quill, generously dimensioned, quill with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Full illumination of the work area Main spindle – Perfectly concentric running, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad - Machine lamp - Coolant pump - Direct drive - Two-speed motor control - Emergency stop button Coolant tank – Removable, level indicator, easy and complete draining/cleaning Control cabinet – Clearly arranged, 24V DC power supply, all contactors and relays from Schneider or Siemens Chip tray – Hinged, easy chip cleaning Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6 to MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phase(s): 3-phase Current type: AC Network frequency: 50 Hz Spindle mounting: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Distance between centres: 1,000 mm Swing over bed: 400 mm

Stanje: novo, Turning diameter: 325 mm Turning length: 1000 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 440 mm Speeds: 12 (85-2000) rpm Tailstock MT 3 Quill stroke: 100 mm Quill diameter: 40 mm Spindle mount: DIN 55027 No. 5 Spindle bore: 32 mm Longitudinal feed: 0.006 - 1.77 m/min Cross feed: 0.003 - 0.885 m/min Total power requirement: 2.2 kW Machine weight approx.: 770 kg Space requirement approx.: 2150 x 950 x 1350 mm Equipment: - Coolant system - Machine lamp Bledpfx Ajtycpaegtog - Chip guard rear wall - Spindle guard - Chuck guard - Tool holder guard - Change gears *Special equipment: - 3-jaw chuck Ø 160 mm Type 3204/ DIN6350, BISON - MULTIFIX quick-change tool post Type A, incl. 4 tool holders - 2-axis digital readout DRO Newall - Foot pedal with brake function CE

Stanje: pripravljen za uporabo (rabljen), Turning length 500 mm Swing diameter over bed 297 mm Swing diameter over cross slide 160 mm Spindle bore 36.0 mm Spindle mount DIN 55022 size 5 Quill: 3 MT Quill travel 90.0 mm Spindle speed 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions (L x W x H): 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Especially suitable for medium-precision turned parts - In checked condition – machine video – ?v=B9svaSOEWiY Equipment: - Robust lead screw/feed shaft lathe - HEIDENHAIN 3-axis digital display "VRZ 773" - RÖHM 3-jaw chuck Ø 160 mm - Hinged chuck guard - Chuck key - MULTIFIX tool post A, with 3 new inserts - Movable tailstock - Swiveling machine light - Control panel, front left Blsdpfx Aoxndbfogteg - Automatic feeds for facing and cross slide - Machine base with cabinet door (storage space) - Chip splash guard rear panel - 1 empty tool cabinet - Emergency stop button - Operating manual

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 3.300 h, Funkcionalnost: popolnoma funkcionalen, Base Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, approved for road use up to 80 km/h Braking system incl. ABS and lighting compliant with EC Directive Bljdpjxx Tigofx Agtog Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection, 20 l/min Load-dependent control of feed material including automatic reversing scraper floor Separate drives for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 litres Feed roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally arranged lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is stopped 24V electrical control system Separate control box at the rear of the machine Hydraulically foldable Multimesh fine shredding basket (mesh size from 30 - 280 mm, gradation available on request) incl. one-piece rear flap Rear conveyor: length 7,500 mm, width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. antimagnetic centre section Underscreen conveyor: length 3,800 mm, width 1,400 mm Moistening system for external water connection Scraper floor with 71 slats Wear protection in the drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL 2011 deep orange Optional Equipment: Hydrostatic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: Engine compartment and rear conveyor Watering system Delivery date by arrangement Available from 06/2026

Stanje: rabljeno, Turning length: 500 mm Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Spindle bore: 36.0 mm Spindle mount: DIN 55022 Size 5 Tailstock quill: Morse taper 3 Quill travel: 90.0 mm Spindle speed: 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement: 3.3 kW Voltage: 380 V Machine weight approx. 620 kg Dimensions (LxWxH): 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regular WEILER factory service Especially suitable for medium-precision turned parts Equipment: - Robust lead- and feed-screw lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with extensive set of collets - Hinged chuck guard - Chuck key - MULTIFIX toolpost size A with 3 new inserts - Movable tailstock - Adjustable bed stop Bsdjxacirepfx Agtjlg - Control panel, front left - Automatic feeds for facing and cross slide - Pole-changing drive motor - Machine base with cabinet door (storage compartment) - Chip and splash guard rear wall - Emergency stop button, bottom right - Machine leveling feet - Original operating manual

Stanje: dober (rabljeno), Premer kolesa: 420 mm Iztek: 405 mm Višina obdelovanca: 380 mm Hitrost rezanja: 16 - 2200 m/min Delovna površina mize: 615 x 615 mm Dolžina tračnega lista: 3450/3650x6–20x0,9 mm Delovna višina: 955 mm Napetost: 380 V Skupna priključna moč: 3,0 kW Teža stroja: pribl. 470 kg Potrebna površina: pribl. 1250 x 1000 x 2100 mm iz izobraževalne delavnice v dobrem stanju (!!) Oprema: - robusten vertikalni tračni žagalni stroj - frekvenčno krmiljen, brezstopenjski pogon traku Blsdoxf Nahjpfx Agtog - nastavitev višine vodenja traku z ročnim kolesom - naprava za varjenje tračnega lista IDEAL z škarjami in brusnim motorjem - nagibna miza 15°/45° - stojalo za stroj - nastavljiva strojna svetilka

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, 1. WEISHAUPT WM-G10/4-A (z plinsko vejo) - Moč: 100-1100 kW - Izvedba: ZM-LN - Leto izdelave: 2020 2. WEISHAUPT WM-G10/3-A (z plinsko vejo) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2015 (1 kos), 2013 (2 kosa na voljo) 3. WEISHAUPT WM-G10/3-A (z plinsko vejo) - Moč: 125-900 kW - Izvedba: ZM-LN - Leto izdelave: 2011 4. WEISHAUPT WM-G10/3-A (z plinsko vejo) Bsdpjwgyrtsfx Agtelg - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2011 5. WEISHAUPT WM-G10/3-A (z plinsko vejo) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2009

Stanje: dober (rabljeno), Stock no.: 2889 Manufacturer: Weiler Year of manufacture: 1969 Type / Model: FDU 260/38 Machine number: 11597/330 Control: conventional Distance between centers: 400 mm Spindle bore: 38 mm Center height: 125 mm Swing diameter over bed: 250 mm over cross slide: 140 mm Speed range: 30 – 2,500 rpm Bljdpfeugr Aaox Agteg Number of turret stations: 6 Power requirement: 0.9 kW Accessories/Equipment: Various collets and turret inserts Condition: good Weight: approx. 0.5 t Dimensions: 1,300 x 700 x 1,200 mm

Stanje: dober (rabljeno), NHH Lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Bljdpfoqgdkisx Agtog Dimensions: 150x85x155 cm (LxWxH)