Stroj za upogibanje

CoastOne HorizOne 50

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! Hfodpfx Aowbh Ifeb Esd ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 rabljeni stroj za umetanje Haeger 412 za umetanje umetaka u lim (studs i matice sa samourezivanjem) na prodaju. U kompletu s alatom i donjim alatom u obliku slova J. Hfsdpfx Abswbhipj Ejd

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Hfsdpfjd Hy Elsx Ab Ejd Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 30 h, Oprema: centralizirani mazalni sistem, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Tube Laser Cutting System – The Ideal Entry-Level Solution. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for craft businesses, metal fabricators, and more, this laser is designed for those looking to take their first steps into tube laser processing. It offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your manufacturing process with precise cuts and user-friendly technology—adding true value to your business. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Max. tube diameter: Ø250 mm - Max. square profile dimensions: 160x160 mm - Max. rectangular profile dimensions: 200x150 mm - Min. tube diameter: 16 mm - Max. material length: 6000 mm - Min. remnant length: 65 mm - Discharge length: 3000 mm - Semi-automatic unloading unit: Optional (6 m) - Max. material weight: 58 kg/m - Max. total workpiece weight: 350 kg - Supported profile types: round, square, rectangular, elliptical - Open section types: I, C, L - Max. open section dimensions: 240x240 mm Dynamics: - X-axis: 40 m/min - Y-axis: 94 m/min - Z-axis: 30 m/min - A-axis: 510°/s Accuracy: - Positioning accuracy: ±0.2 mm - Positioning repeatability: ±0.05 mm - Tube center detection with capacitive sensor: Yes Available Configuration Options: LASER POWER OPTIONS: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser (incl. chiller) + Durma cutting head Hjdsrkntcepfx Ab Ejfd ADDITIONAL OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar air) - CNC bevel cutting head (+/- 45°) - Semi-automatic front loading system - Discharge table (6 m) with conveyor belt - Discharge table (3 m) with conveyor belt - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud license + D-Mobile + Smart Watch - STEP importer

Stanje: novo, Leto izdelave: 2024, Drilling and Milling Unit Kudu with CNC Control and Tool Changer (3-axis) Drilling and milling unit with traversing machining head – the table remains stationary while the drilling head moves. The unit supports both manual and fully automatic operation modes. After each drilling cycle, the machining unit automatically repositions itself in both the X and Y axes to the next drilling position. The operation is kept very user-friendly. Data transfer to the machine control is possible in DXF/DWG file formats via a programming station. Alternatively, programming can be performed directly at the machine control. The machine is highly robust and built from proven machine components. Technical Specifications: - Measuring length: 6,000 mm - Total length: 8,050 mm - Rigid machine base frame - Drilling head speed: up to 2,500 rpm (standard version); delivered with the optimal speed for your application - Tool holder: SK 40 - X, Y, and Z-axis driven by servomotors - Rapid traverse in X-axis: 20 m/min - Rapid traverse in Y-axis: 5 m/min - Distance from table top to tool holder bottom: 400 mm - Table width: 480 mm - Working height: 1,050 mm - Drilling diameter: 3 to 30 mm in St. 50 (tool-dependent) - Tapping: M4 – M30 (with compensation chuck) Hfedpfefu Ivzjx Ab Eod - Y-axis machining travel: 300 mm - X-axis tolerance: ±0.1 mm - Y-axis tolerance: 0.06 mm - Z-axis tolerance: 0.06 mm - Drilling head drive motor: 5.5 kW - Machine weight: 2,300 kg - Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) - Power supply: 32 A - Air supply: 8 bar - Front safety via light barrier - Rear access protection via machine fence - Control: 21.5" touch screen panel with reinforced front glass - Simple programming at the machine - Milling of long holes and circles - Lubrication via minimum quantity spraying system - Without material clamps - Remote maintenance via TeamViewer possible (LAN interface) - Tool storage for drilling tools, with dimensions and speed - Simulation of work processes - Digital handwheel Your Advantages: - Workpiece surfaces are protected - Clear, graphical user interface - Machining right to the end of the workpiece is no problem - 50% space saving compared to moving-table systems - Chips are collected in an integrated chip tray - Easiest programming & operation - Minimum quantity spraying system (standard) - Programming errors are eliminated through CAD/CAM You are welcome to inspect the desired system at our production/demo facility at any time. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2025, Punkcijski varilni stroj / Namizni punkcijski varilni stroj – aktualna izvedba letnik 2025 – nova naprava Krmiljenje TE 101 z digitalnim prikazom varilnega toka Nazivna moč 20 kVA/50 % ED Priklop na omrežje 400 V Kratkostični tok 19 kA Varilni tok 15,2 kA Varovalka 63 A Dovod/ faza 25 mm² Sila elektrode 187 daN pri 6 bar Izvitje 160 mm Stožec elektrode MK1 Masa 81 kg - 2-stopenjsko nožno stikalo - Glavno stikalo - Pnevmatska vzdrževalna enota s filtrom - Stroj je naš demonstracijski stroj - Stroj je možno po dogovoru in predhodnem terminu predstaviti v Dresdnu Hedpfx Absh Nu A Ns Esfd

Stanje: novo, Leto izdelave: 2023, Horizontal Bending Machine AH 40 - Manufacturer: ZOPF - With semi-automatic control - NC control unit - Includes bending pin - Includes tool holder for dies and foot pedal - Pressing force: 40 tons Hedpfx Asqvm Ukeb Eefd - Infinitely adjustable stroke setting - Adjustable working speed Max. working stroke: 10 mm/sec Return speed: 20 mm/sec - Adjustable hydraulic pressure - Max. tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Enclosed work table - Weight: 1000 kg - Bending capacities: Flat material: 150x22 mm Round tube: up to 60 mm

Stanje: dober (rabljeno), 1 x stroj za valjanje navojev Thommen G 07 / PR - 07 Tehnični podatki: Tlačna zmogljivost: 7 t Premer: 1,2 - 22 mm Maks. širina pri potopnem načinu: 55 mm Premer valjev: 65 - 95 mm Vpenjalna gred: 28 mm Dodatna oprema: 22 kompletov valjev, delno novih (seznam sledi) Hsdpfx Aevwdb Ujb Ejfd Stroj si je možno ogledati pod napetostjo po predhodnem dogovoru.

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Hfedpfx Abjwbknbj Ejd Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: rabljeno, Leto izdelave: 1996, Hydraulic mandrel bending machine with extensive accessories Preselection of 8 different bending angles with digital display Digital length measurement as well as digital display of rotation Max. working length: 6096 mm Round tube, steel (S 235): 60.0 x 6.0 mm Round tube, stainless steel (S 355): 60.0 x 4.0 mm Square tube, steel: 50 x 50 x 4.0 mm Rectangular tube, steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Hfedpfx Ajq Daxtob Eed Weight: approx. 1800 kg