CNC avtomatska stružnica

CMZ TC-30 YS

Stanje: rabljeno, Leto izdelave: 2004, Technical details: X travel: 750 mm Y travel: 600 mm Z travel: 520 mm Table clamping surface: Ø 700 x 500 mm Spindle speed: 42,000 rpm Tool holder: HSK E50 Control: HEIDENHAIN iTNC 530 Automatic tool changer: 60 positions Ffjdswzx Nmepfx Abvjw Rapid traverse: 50 m/min Table load – central/maximum: 350 kg Total power requirement: 50 kVA Machine weight approx.: 9 t Space requirement approx.: 3.2 x 2.65 x 2.8 m 5-axis simultaneous HSC machining center, NC rotary/swivel table 700 x 500 mm, B-axis 180°, C-axis 360°, Chip conveyor, Electronic handwheel, Laser, Preparation for 3D probe HEIDENHAIN TS 641 (probe not included) BA 4, Oil mist extraction system, Spindle cooler, No internal coolant supply (IKZ), Approx. 141,300 power-on hours, approx. 64,500 total spindle hours Machine in good condition (measurement protocol available).

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Fsdpfx Aewbh Ifjbvefw Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: dober (rabljeno), WEBER pipe extrusion line including: Fodpfxevryhys Abvefw WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 rpm - Spindle drive power: 7.6 kVA LINEAR AXES - Travel distance X/Y/Z axes: 500 / 410 / 610 mm TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 sec TABLE - Table size: 650 x 400 mm - Max. table load: 200 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total drive power: 25 kVA WEIGHT AND DIMENSIONS - Space requirement: 1,640 x 2,100 mm - Machine height: 2,274 mm - Machine weight: 2,250 kg MACHINE HOURS - Operating hours: 9,070 h ACCESSORIES - Control: BROTHER A00 - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without frequency inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 bar Ffjdpfx Ajuhbt Robvow - Oil mist extractor: AAF Astrosta - Electrical transformer - Tool holders: 42 pcs

Leto izdelave: 2012, stanje: dober (rabljeno), Muratec MW120 GT naprodaj Ffjdpfxeifi D Tj Abvew Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm Fodpfx Aehzbipsbvefw DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total connected load: 11 kVA WEIGHT AND DIMENSIONS - Required space: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 13,837 h ACCESSORIES - Control: Fanuc Oi-TD - 3-color status light Ffedpfx Aouhbbzjbvjw - Driven guide bushing - Parts removal - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire extinguishing system * NB: Functionality not guaranteed. Inspection by a qualified company on the part of the buyer is recommended. - Electrical transformer

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 12.000 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina medeninaste pločevine: 80 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 1.550 mm, pomik osi Y: 3.050 mm, pomik po osi Z: 290 mm, teža obdelovanca (maks.): 1.400 kg, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 9.100 mm, skupna širina: 3.120 mm, skupna višina: 2.200 mm, trajanje garancije: 24 meseci, delovno območje: 3.015 mm, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Brandneue Full-Cover-Faserlaserschneidemaschine | GS-CE/ GS-CE PRO-Serie | 3000–60000 W MACHINE IN STOCK - AVAILABLE Fsdpfoub Nwdox Abvjfw This FULLY COVERED FIBER LASER CUTTING MACHINE from the GS-CE series provides maximum safety for metal cutting. Thanks to the full enclosure and the observation window made from protective glass, you can monitor the process and avoid hazards such as laser radiation, sparks, etc. It also features an exchangeable table with rapid changeover—table can be swapped within 10 seconds. It is the ideal solution for safe and efficient metal cutting! Working area sizes: 3000 mm * 1500 mm, 4000 mm * 1500 mm, 6000 mm * 1500 mm, 6000 mm * 2500 mm; Laser power: 6 kW - 80 kW CNC controller: FSCUT Max. acceleration: 4G BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Cooling system fault alarm Laser safety glass Water chiller TÜV CE certificate Optional: automatic loading and unloading system The control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System is delivered complete including chiller, extraction unit, and safety light barriers Demo machine - as new condition

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Ffodpet Apugjfx Abvow Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Leto izdelave: 2010, obratovalne ure: 29.000 h, stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Numéro : DE27699 Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral Ffedpfx Aoxykcgobvsw L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.