1999 CM lamelni tračni transporter za sušenje stolov ali podobnih lakiranih izdelkov

CM

Leto izdelave: 2006, obratovalne ure: 12.169 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 1.400 kg, Strojna naprava za peskanje, izdelana leta 2006, z vrtljivo mizo. Ta model C.M. T-10 ima vrtljivo mizo s premerom 1.000 mm in uporabno višino v delovnem območju 450 mm. Največja dovoljena obremenitev mize je 900 kg, naprava pa deluje z močjo 5,5 kW. Če iščete visokokakovostno strojno napravo za peskanje, razmislite o modelu C.M. T-10, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. - Omrežna napetost: 400 V - Število faz: 3 f / 3+PE - Frekvenca: 50 Hz Pjdpfx Aloz Ha Eno Dsrb - Obratovalna obremenitev (moč): 4,741 kW - Obratovalna obremenitev (tok): 10,02 A - Zaščita pred kratkim stikom / prekinjalna moč: 30 kA - Največji tok motorja: 7,90 A - Moč turbine: 5,5 kW - Premer vrtljive mize: 1.000 mm - Uporabna višina v delovnem območju: 450 mm - Največja dovoljena obremenitev mize: 900 kg - Krmilnik / HMI: ESA VT50 - Varnostni stikalo: Telemecanique XC2SE7311 / XC2SE - Priložena oprema / obseg dobave: Vsi kabli in cevi, potrebni za neposredno uporabo, držalo za vijake za nastavitev kota obdelovancev v peskalni komori.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 511001M, nazivna moč: 160 kW (217,54 KM), Popolnoma kompleten in delujoč Lindemann ZB 120 x 100 - 160kW Schorch pogon - Voith tekočinski sklop - Dovodni jekleni verižni transporter - Cyrus vibracijski izločevalnik Predpfjyizcqjx Al Djb - Izvlekač osi - Hidravlična enota - Rezervne rešetke - Kladiva - Razni obrabni deli

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, For sale: a complete overhead travelling crane with an electric chain hoist from the renowned brand Stahl, with a lifting capacity of 1,000 kg. Year of manufacture: 2013. The set is fully functional and ready for further use. ✅ Technical specifications: * Year of manufacture: 2013 Prsdpfx Aswcrazsl Dsb * Lifting capacity: 1,000 kg (1 tonne) * Hoist: STAHL ST2010 – robust, reliable unit * Drive type: electric, chain * Total crane length: 10,460 mm (10.46 m) * Stable load-bearing beam + cable and power supply tracks * Available for inspection on-site – operated in a clean production facility The crane is in very good technical condition – well-maintained and ready for operation. Ideal for workshops, industrial plants, warehouses, metalworking shops, or toolrooms.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Prsdsz E U Syepfx Al Djb Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, approx. 300 cm incl. base, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE100 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, and unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally mandated hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and upright back are welded together, providing additional security and reducing assembly time, as feet do not need to be bolted to the upright back - Bracing made from angle steel – no tension rods necessary, which shortens assembly times - No slotted hole system – this means no weakening of the upright profile Price: €2,404.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on postal code. Assembly: Our trained personnel are available to assist with professional assembly and dismantling of your facility, if required. Our recommendation: Let us know your requirements... We are happy to help realize your projects from planning to ordering to installation.

Stanje: rabljeno, številka stroja/vozila: 5063, System: Used Decanter / Centrifuge Manufacturer: KHD Model: Solid Bowl Screw Centrifuge Type: CP 3-0.1 Machine No.: 5063 Max. Permissible Speed: 2950 rpm Drum Inner Diameter: approx. 530 mm Drum Wall Thickness: 12.5 mm Drum Material: W 2 Gearbox: Integrated hydraulic gearbox Hydraulic Drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total Weight: 2400 kg Pjdpfxeddzm Te Al Derb Purchase and rental available.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) Racking consists of: - 04 x uprights incl. base, approx. 416 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - Including all necessary connecting elements and bolts Why BLT Cantilever Racking? - Certified German manufacturer – DIN EN 1090 – Made in Germany - All stated load capacities for frames and arms are statically verified at 100% load. - All racking systems are delivered hot-dip galvanized. Suitable for indoor and outdoor use, and won’t rust like painted racks. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term availability guarantee for spare parts - Base and spine of upright are welded together, ensuring maximum safety and reduced assembly time, as there’s no need to bolt the base to the upright separately - Bracing made from angle steel means there’s no adjustment required via turnbuckles, further shortening assembly times - No slotted hole system, ensuring no weakening of the upright profile Price: Predpfsz E U R Nsx Al Djb EUR 2,578.00 net + VAT as required by law. You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., are also available from us. Transport: Delivery can be arranged by our partner forwarding company on request, with shipping costs depending on postal code. Installation: Our trained staff are available to assist you with professional assembly and disassembly of your warehouse equipment as needed. Our recommendation: Let us know your requirements… We are pleased to help you realize your projects, from planning and ordering to installation.

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm Pjdjz E U R Aspfx Al Djrb - NEW, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 4 x uprights, incl. base, approx. 300 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE80 - Incl. all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verified at 100% capacity. - All racking is supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use, does not rust like painted racks. Maintains consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term aftermarket guarantee - Upright foot and upright back are welded together, providing extra safety and reducing assembly time as the feet do not need to be bolted separately to the upright backs. - Bracing made from angle steel eliminates the need for adjustable turnbuckles, thus shortening assembly time. - No slotted hole system, meaning no weakening of the upright profile. Price: €2,265.00 net + applicable statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery by our partner freight forwarder on request, costs depend on postal code. Assembly: Our trained staff are happy to assist with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.

Stanje: pripravljen za uporabo (rabljen), * Znamka: Metso/Lokomo * Model: drobilnik s lijakom in vibrirnim koritom Podpfsywncnox Al Djrb * Tip: čeljustni drobilnik C125 * Vstopna odprtina: 1250 x 950 mm * Vključuje: lijak in vibrirno korito * Vključuje: Volvo dizelski motor * Vključuje: komplet rezervnih strižnih plošč * Drobilnik: nedavno opremljen z novimi hidravličnimi cilindri, ležaji in nihajno gredjo.

Stanje: novo, Leto izdelave: 2022, Cantilever Rack – NEW STOCK Specifications: - Height (H): approx. 400 cm - Depth (T): approx. 137 cm - Length (L): approx. 402 cm - Cantilever Arms: approx. 120 cm - Axle dimension: 131 cm - BRAND NEW, immediately available from stock. - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack includes: - 4x uprights, incl. base, approx. 400 cm, made from IPE160 - 12x cantilever arms, approx. 120 cm, made from IPE80 - incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer, DIN EN 1090 – Made in Germany Predpfx Aez E U E Tel Djb - All stated load capacities for uprights and arms are structurally verified at 100% load - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use and will not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt assemblies in accordance with DIN EN 15048-1 - Long-term spare parts availability - Upright base and rear are welded for added safety and reduced installation times, as the bases do not need bolting to the upright backs - Bracings made from angle steel, no adjustment via turnbuckles required; this reduces installation time - No elongated hole system, so the upright profile is not weakened Price: €2,462.00 net + VAT as legally required. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on your postal code. Installation: Our trained personnel are available to assist you with professional installation and dismantling of your facility if required. Our recommendation: Let us know your requirements… We are happy to assist you with your projects, from planning and ordering to installation.

Stanje: novo, nosilnost na konzolno roko: 650 kg, višina police: 4.000 mm, skupna dolžina: 4.000 mm, skupna širina: 1.480 mm, nosilnost na stojalo: 1.950 kg, Data: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm deflector at the front - Axle spacing: 130 cm - NEW stock available for immediate delivery. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights painted in RAL7016 - Cantilever arms painted in RAL3000 - Arms are hooked in - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) The uprights included in this racking set are pre-prepared free of charge for potential conversion to double-sided use. Advantages of the hooked-in cantilever arm: see images. Racking consists of: Prjdpfxjz E U Ete Al Dob - 04 x uprights incl. base, approx. 400 cm made from IPE180 - 12 x cantilever arms, approx. 120 cm, profile 10 cm x 4 cm - incl. all necessary connecting elements and bolts Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc., can also be purchased from us. Transport: Delivery is available on request via our partner shipping company; costs depend on postal code. Assembly: Our trained staff are available to professionally assemble and dismantle your equipment if required. Our recommendation: Let us know what you need... We are happy to assist you with your projects, from planning and ordering to installation.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, obratovalne ure: 12.500 h, Funkcionalnost: nefunkcionalno, Hammel VB 850 E stacionaren z magnetom + 2 para novih gredi Pedpfx Alsyt Iaws Djrb Stroj je brez menjalnika.

Stanje: novo, Leto izdelave: 2020, Cantilever rack NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights incl. base approx. 416 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE100 - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically verified at 100% load - All racking systems are supplied in hot-dip galvanized finish. This makes them suitable for both indoor and outdoor use and unlike painted systems, they will not rust. Consistent appearance for many years - We use legally approved hot-dip galvanized bolt sets according to DIN EN 15048-1 Prodpfxsz E U Emo Al Deb - Extended repurchase guarantee - Upright base and rear are welded together for additional safety and reduced assembly times, as the foot does not need to be bolted separately to the upright - Bracing made from angle steel eliminates the need for adjustment with turnbuckles, shortening assembly time - No slotted hole system, so there is no weakening of the upright profile Price: €2,631.00 net + statutory VAT You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. are also available from us. Our recommendation: Let us know your requirements... We are happy to assist you with the implementation of your projects, from planning and ordering to assembly. Delivery possible at a favorable rate upon request.

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolt-on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, incl. base approx. 350 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE80. - Incl. all necessary connecting elements and bolts. Why choose BLT Cantilever Racking? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for both uprights and arms are statically verifiable at 100% load. - All racking systems supplied in hot-dip galvanized finish. Can be installed indoors or outdoors, and do not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fastener assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright foot and upright back are welded together, offering enhanced safety and quick installation, as feet do not need to be bolted separately. - Bracing made of angle steel, eliminating the need for tension rod adjustments. This significantly reduces assembly time. - No slotted hole system, so the upright profile remains uncompromised. Price: €2,356.00 net + statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our partner freight forwarder upon request. Freight cost depends on postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your storage systems if required. Our recommendation: Pjdpfxsz E U D Ae Al Derb Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to assembly.

Stanje: dober (rabljeno), 1 used radial drilling machine Manufacturer: Stimin Model: GR 820 H Serial No.: 773 Year of manufacture: 2004 Technical specifications: Prodpetzctmjfx Al Deb Drilling capacity: 80 mm Arm reach: 1600 mm Spindle taper: Morse Taper 6 Spindle stroke: 390 mm Spindle speeds: 24 steps, 20 – 1400 rpm Right/left rotation Feed: 12 steps, 0.045 – 1.5 mm/rev Motor power: 400 V / 14.5 kVA Arm and head clamping: electromechanical Distance from machined bed to quill: min. approx. 400 mm max. approx. 1800 mm Usable machine table with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Required space approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.280 mm, skupna širina: 390 mm, skupna višina: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm, SSI Schäfer R3000, Second Choice (New Item) Shelf Racking, Workshop Racks, Storage Racks, Manual Storage, Boltless Shelving, Small Parts Storage B40/392/70, ZB341315, ZB9414 Specifications: - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Quantity: 120 pcs. shelves SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf - Surface: Sendzimir galvanized - SECOND CHOICE (NEW ITEM) (This is a second-choice product, new and unused. Second choice means that dust deposits, minor scratches, or slight soiling may be present.) - Ex stock Wietmarschen Price: €960.00 net €1,142.40 gross You will receive an invoice with VAT shown separately. Shipping: Delivery is available upon request via our partner freight forwarder. Shipping costs depend on the postal code. Prjdpfoz E Rcuex Al Dob Assembly: Our trained staff is happy to provide professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with implementing your projects, from planning through ordering to installation.