Giljotinske škarje - mehanske

CIDAN MS M 10/3.0

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display Cgsdegg N Twspfx Ahxst - Can be used horizontally / vertically - Foot switch - Emergency stop - Documentation - 400V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Mechanical guillotine shear Make: Petersen Machinery Model: Cidan HSM-F 20/3 Year: 2005 Technical Data Manufacturer: CIDAN Model: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle: 2° Connection: 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 m Weight: approx. 1.5 t Features • Manual backgauge 750 mm • Continuous hold-down bar with hard rubber strip • Angle gauge • Extendable support table All information is provided without guarantee. Cgedpfxsu Utaie Ahxet A demonstration is possible at any time in our showroom.

Stanje: rabljeno, Leto izdelave: 2003, Tehnične podrobnosti: Vrtalna zmogljivost v jeklu (premer): 25 mm Iztegnjenost: 255 mm Vrtalni hod: 140 mm Vreteno MK: MK 3 Hitrost vrtenja vretena: 105 - 2980 / 8 stopenj vrt/min Razdalja vreteno/miza min./maks.: 350 / 950 mm Pritrdilna površina mize: 420 x 270 mm Miza vrtljiva: 360° Miza nagibna pribl.: 30° levo/desno Ročna nastavitev vrtalne mize: 600 mm Premer stebra: 100 mm Cgsdpfju Idhyox Ahxet Napajalna napetost: 400 V / 50 Hz Skupna priključna moč: 0,9 kW Teža stroja pribl.: 180 kg Dimenzije stroja (DxŠxV): 0,6 x 0,5 x 1,8 m Oprema: Röhm hitroprijemalna glava 3 - 16 mm Preklop za desni/levi tek za rezanje navojev

Stanje: rabljeno, Motor power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you from stock, subject to prior sale and errors: DECKEL Universal Tool Milling Machine with FAGOR 3-axis Digital Readout Type FP 3 Year Serial No. Table travel: longitudinal, motorized / manual 490 / 500 mm vertical, motorized / manual 370 / 380 mm Transverse milling slide travel, motorized / manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Installation height under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feed rates 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive motor 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special features • FAGOR 3-axis digital readout V 300 (glass scales) with advanced functions such as chain dimensions, absolute dimension, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, tiltable +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Additional manual DECKEL universal rotary table ? 380 mm with direct and indirect indexing, various index plates • Coolant equipment, chip tray, central lubrication, separate control cabinet, operating manuals Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Cgsdov Nq Skopfx Ahxjt Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: rabljeno, Technical details: X-axis travel: 600 mm Y-axis travel: 300 mm Z-axis travel: 360 mm Speed range, max horizontal: 40–2000 rpm Spindle taper (vertical/horizontal): SK 40/SK 40 Speed range (max permissible): 40–2000 rpm Feed rate: 2–3600 mm/min Quill travel: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Machine dimensions approx. (LxWxH): 1.8 x 1.35 x 1.95 m Milling machine with shaping head Stroke length: 32–80 mm, with 10 double strokes, 24–285 strokes/min Cgodpeu U E T Iofx Ahxot Heidenhain 3-axis digital readout *

Stanje: rabljeno, Column Drilling Machine Make: IBARMIA Model: A-35 Year of Manufacture: 1980 – workshop tested Machine No.: 1294-C Spindle speed: see technical data Accessories: - Automatic feed - Machine lamp - Machined coolant base plate - Coolant system Cedsw Hxbmspfx Ahxsgt - Operating manual Technical Data: 9 spindle speeds via gearbox steps 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation 4 automatic feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Drilling capacity in cast iron (GG 20): 45 mm Tapping capacity in steel (ST 60): M 27 Tapping capacity in cast iron (GG 20): M 33 Spindle taper: MK 4 Spindle travel: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Table can be rotated Weight approx. 490 kg Used, sold as seen, without guarantee

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Erlo SEAR 25-RS drilling machine, geared-head drill with automatic feed, equipped with tapping system, spindle speeds 64-3060 rpm, comes with drill chuck and safety guard. Machine in very good condition, year 2006. 2 identical units available. Cgjdpfx Ajv Rnhxshxet

Stanje: kot nova (razstavni stroj), Leto izdelave: 2007, I-beam - flat 50 x 10 mm I-beam - upright 80 x 15 mm Angle steel 50 mm Round bar material 30.0 mm Raw diameter max. 1 1/2" mm Solid material diameter 30.0 mm Cjdpfet U R H Usx Ahxsgt Weight 0.185 t Dimensions L-W-H 670 x 530 x 1350 mm Square material 40 x 40 x 3 mm Tubes 60 x 2.0 mm Total power requirement 0.75 kW Demonstration unit Equipment: - Machine stand - Foot switch - Standard rollers (split) - Horizontal and vertical bending possible

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.250 mm, trajanje garancije: 12 meseci, število podajalnih valjev: 1, Demonstration machine Slit Cut 1250 mm Cgjdpfxowy Hwpj Ahxjt Manufacturer: CIDAN Forstner Year of manufacture: 2025 Motorized infeed Longitudinal slitting with 5 pairs of blades with automatic feed Cross-cutting with rotary shear SPS1 control for automatic feed, longitudinal and cross-cutting The Forstner SLIT longitudinal and cross-cutting line is optimally designed for all sheet metal workshops, drawing on years of experience. It consists of a proven combination of traditional Forstner machines and can be combined with any manual or motor-driven decoiling device. Main advantages: - The new design further improves your SLIT system. - Now even more space-saving with the same strength. - LED slit knife illumination. - Table can be operated from both sides. - Extremely easy blade setting. Standard equipment: - Roller feed hopper - Feed table - 5 pairs of longitudinal slitters - Rotary shear for cross-cutting - SPS1 touch control - Speed: 25 m/min - Cutting capacity for steel during longitudinal slitting: - 1.5 mm with 3 pairs of blades - 1.25 mm with 4 pairs of blades - 1.0 mm with 5 pairs of blades

Leto izdelave: 1973, stanje: zelo dobro (rabljeno), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, subject to prior sale and errors, from stock: W E I L E R Precision Machinist Lathe Model MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning Ø over cross slide 140 mm Max. swing Ø over bed 260 mm Between centres 500 mm Cedpjxpxqwefx Ahxogt Spindle bore 28 mm Range 1 – Speed range: 220–1,800 rpm Range 2 – Speed range: 110–3,600 rpm Spindle drive kW Total power kW - V - Hz Weight 500 kg Accessories / Special features • Equipped with a 3-jaw chuck from RÖHM, 110 mm Ø, mounted • Machine base with integrated tool storage and comprehensive accessory package, including collet sets Condition : Very good – ready for demonstration. Ideal for training workshops, maintenance, etc. Please click here for a video of the machine : MDU260/4 Delivery : ex-stock – as inspected Payment : strictly net on collection – after receipt of invoice