Enote za nadzor temperature

CHURCHILL-ISITAN CH220X2

Stanje: zelo dobro (rabljeno), Engel Victory 1350H500V/220 Combi Clamping force: 220 tons Year of manufacture: 2004 Mounting platen (W x H): 960 x 830 mm Screw diameter: 55 mm + 40 mm Injection volume: 618 cm³ + 251 cm³ Ledpfxepa Rhbs Aahjai Control unit: EC100/A03 Minimum mould installation height: 320 mm Maximum: 730 mm

Stanje: rabljeno, številka stroja/vozila: 11647, Rotor knife rows: 3 Stator knife rows: 2 Rotor width: 280 mm Rotor diameter: 280 mm Infeed dimensions: 300 x 300 mm Ljdpfx Asghgqzjahsai

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Clamping force: 275 t, injection weight: 455 g, cylinder diameter: 55 mm, max. opening stroke: 850 mm, weight: 20 t, operating hours: approx. 63,000 h, including documentation, a set of new pumps, and GEIGER LR 16 EC handling unit. The handling unit should be overhauled. Ljdpfxsiiv Aqj Aahoai

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Laedpfx Aaeg Ey Rfjhei Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), Here we offer you a Zwick / Roell tensile testing machine (table-top testing machine). Zwick / Roell Materials Testing Machine Model: BDO-FB0.5TH - Load testing in tension/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm Lsdpfjd Sr S Isx Aahjai - Width of test area: unlimited - Test area depth: 100 mm - Max working stroke without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection (for PC operation): COM 1 - Power specifications: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see pictures) (Subject to change and error in technical data and specifications!) If you have any further questions, we are happy to answer them by phone.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stock No. 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: - 1 volumetric dosing unit - Extruder Plastmachines type PME 100 Single screw Ø 100 mm – 35 L/D ratio Drive 134 kW – DC motor - 1x degassing zone - Melt filter BKG type K-SWE 121 RS – back flushable incl. Hydraulics 3 kW - Strand die head with 20 holes x Ø 3.5 mm - Strand cooling trough 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 3000 - ResoTec control / switch cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available & ready for demonstration at our Wuppertal facility Laedpfotvfhcjx Aahsi

Leto izdelave: 1999, Stanje: rabljeno, Used Entex Extruder PL-WE150 complete with control cabinet, previously used for powder coatings, in good condition. Ljdpfebqt Arox Aahsai We can also offer you an Entex PL WE 70!

Stanje: rabljeno, Hymmen CombiCoater ELX-S 1400 coating line with UV dryer. Lajdjlf H Tcepfx Aahsi - Technical data will follow shortly - For self-dismantling and self-collection.

Leto izdelave: 2011, Stanje: delavnici obnovljeno (rabljeno), No. 2401 1 used double-piston screen changer – backflusher Manufacturer: ECON Model: ESK 480-4B Year: 2011 Screen Block 1: 2 pistons, each 2x Ø 123.5 mm Screen Block 2: 2 pistons, each 2x Ø 176.3 mm, with screen area 490 cm² Complete with: hydraulic station Siemens control system The screen changer is demonstration-ready; inspection possible at short notice by arrangement. Further screen changers / melt filters available ex stock Wuppertal: EREMA RS and laser filter Kreyenborg K-SWE / RS Ettlinger ECO BD Plast Alphatec Gneuss Laedpfjgbfwmex Aahei Brit-Ass

Stanje: rabljeno, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVEL - Travel X/Y/Z axes: 350 x 250 x 250 [mm] - Travel U/V axes: +/- 90 [mm] - Max. taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] - Surface finish quality: 0.125 [μm] WIRE GUIDING - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY - Supply voltage: 380 [V] Lajdpjuhq Rlofx Aahsi - Total drive power: 11 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank