Strojno orodje

CHARMILLES HD10

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Charmilles Millenium control system Travel (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1450 x 900 x 510 mm Max. workpiece weight: 3000 kg Cutting speed: 400 mm²/min Gedpfx Absuuz Iis Touk Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg capacity (K250) Overall system dimensions: 2670 x 2870 x 2645 mm Total weight of system: 6300 kg The machine will be cleaned, fully overhauled, and tested for all functions upon receipt of order. Options: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport - Clamping bar set

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Grinding diameter: 80 - 250 mm Grinding length: 600 mm Gedpfx Abju D I Tle Tsuk Centre height: 175 mm Longitudinal travel: 750 mm Workpiece speed: 6 - 600 rpm Grinding spindle speed: 1500 - 3600 rpm Cross travel - automatic and manual: 320 mm Control: Kelco 80 Total power requirement: kW Machine weight approx. 4.4 t Space requirements approx. 3.1 x 2.1 x 2.0 m

Stanje: rabljeno, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVEL - Travel X/Y/Z axes: 350 x 250 x 250 [mm] Guedpjuhq Rlofx Ab Tjk - Travel U/V axes: +/- 90 [mm] - Max. taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] - Surface finish quality: 0.125 [μm] WIRE GUIDING - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total drive power: 11 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 26 kVA WEIGHT AND DIMENSIONS - Space requirements: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7,300 kg MACHINE HOURS - Operating hours: 48,894 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor Gujdpfx Aboup Hw Ej Tok - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: novo, POVSEM NOV 3-OSNI OBRATOVALNI CENTER HEIDENHAIN TNC 640 digitalno vodenje poti HEIDENHAIN paket (motorji, merilni sistemi in ročno kolo) X-os: 1.430 mm Y-os: 670 mm Z-os: 640 mm Dimenzija mize: 1.500 x 620 mm Nosilnost mize: 1.200 kg Hitrost vretena: 10.000 obr/min (oljno hlajeno) Vpetje vretena: SK 40-BIG PLUS (BVD 40) Maksimalna moč vretena: 32 kW IKZ – notranje dovajanje hladilne tekočine – 20 bar Hitri pomiki: 30.000 mm/min Pozicionirna natančnost: ± 0,005 mm Ponavljajoča natančnost: ± 0,003 mm Menjalnik orodij WZW: 30 mestni (opcijsko do 60 mest) Gjdpfehy Atfox Ab Tjuk Transporter ostružkov s členkasto verigo Priprava za 4. os (vrtljiva miza) Popolna ohišja Odgovorjeno bo le na povpraševanja iz Nemčije.

Stanje: zelo dobro (rabljeno), Centre height 180 mm Centre distance 1000 mm Grinding length 650 mm Godpfx Aovhafdob Tsuk Grinding wheel 500 x 80 x 127 mm + 250 x 32 x 127 mm With internal grinding attachment Various accessories MARCELS MASCHINEN AG

Leto izdelave: 2007, Stanje: generalkompletno obnovljen (rabljeno), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (non-submerged) Achievable surface quality: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Guodsmmfwuspfx Ab Tok Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy machine setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and completely overhauled at our facility upon order placement. A 6-month warranty is provided on all machine components. Commissioning and training services are available upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Gujdew Ucyujpfx Ab Tjk Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Required space: approx. 3.6 x 3.5 m As a global leader in Kellenberger overhauls/retrofits, we are able not only to deliver machines in as-new quality with warranty, but also to provide comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - Repainted Electrical overhaul: - New modern CNC cylindrical grinding machine control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical cables, limit switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (on B axis) Standard equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper, optionally with fine adjustment - Grinding spindle head T1 / T2 / T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Gsdpfeuwv H Tex Ab Tsuk Optional extras at additional cost: - HF internal grinding spindle - High-precision, maximum rigidity workhead - Measuring control - Extraction unit - Paper band filter Control system: Basic grinding cycles: - Zero-setting workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B axis swivelling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles: - Profile plunge grinding, external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single- and multi-thread external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-round grinding, external and internal Price: 15,000

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Gsdpfx Abeu A Dn Ne Tsuk Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.