Stroj za razjezitev žice

CHARMILLES 240

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalni hodi X/Y/Z: 350mm/220mm/220mm, dimenzije mize X/Y: 680mm/450mm. Največja teža obdelovanca: 750kg, največje dimenzije obdelovanca X/Y/Z: 1000mm/550mm/250mm. Obseg premera žice: 0,1mm-0,3mm, velikost koluta žice: 8kg, kapaciteta nagiba: 0°-30°. Dimenzije X/Y/Z: 2020mm/2050mm/2000mm, teža: ca. 2500kg, delovne ure: ca. 60000. Gkjdpfx Abox E Ulxe Tjf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type Gksdpfx Asw Ucyuob Tof All technical data is given without obligation and subject to errors or omissions.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: nepreverjeno, rabljeno, v dobrem stanju Gkodpfxox D Uvxj Ab Tsf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 27.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, lastna masa: 2.500 kg, Oprema: dokumentacija / priročnik, Machine in excellent condition. Already cleaned. Godpov Im R Tefx Ab Tskf Sold as is or reconditioned on request. Machine can be inspected at our premises in Semsales, Switzerland.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 36 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Maximum travel: 420 mm Minimum automatic travel: 1 mm Table feed rate: 100–3500 mm/min Gkjdpfjw T Sc Nsx Ab Tjf Reversal dwell time: 0–5 sec Table tilt angle (400/650 mm): 30°/15° CROSS SLIDE: Maximum travel: 170 mm Rapid traverse: 30 mm Plunge depth per diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual travel: 120 mm Swivel range to the right: 15° + 30° Optional wheelhead guard for max. wheel set width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Max. load during unsupported grinding: 12 Nm Optional continuously variable drive, adjustment range I: 30–300 rpm Optional continuously variable drive, adjustment range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Straightness of generator: Between centers 400 mm Measured over 400 mm: 0.002 mm Between centers 650 mm Measured over 650 mm: 0.003 mm Roundness deviation for unsupported grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Admissible voltage variation: –15% to +10% Admissible frequency variation: +/- 3% Compressed air: 5 bar Unless otherwise stated, technical data is provided without obligation or warranty.

Stanje: rabljeno, Leto izdelave: 2004, Wire EDM Machines / EDM Travel X: 350 mm Travel Y: 220 mm Travel Z: 220 mm Max. workpiece size X: 1000 mm Gedpfjvyzgaox Ab Tskf Max. workpiece size Y: 550 mm Max. workpiece size Z: 220 mm Max. workpiece weight: 750 kg Table size X: 680 mm Table size Y: 450 mm With automatic wire threading U / V-axis: 350 mm / 220 mm Cutting in water bath

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.900 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Water bath Operating hours 5900 h Travel paths X 350 mm Y 220 mm Z 220 mm Gkodpfswzyr Asx Ab Tof U 350 mm V 220 mm Year of manufacture 2008

Stanje: dober (rabljeno), Leto izdelave: 2007, AgieCharmilles FI 240 ALP (2007) Technische Daten der AgieCharmilles FI 240 ALP Drahterodiermaschine (2007) • Hersteller: AgieCharmilles Godpfxjv I Snqe Ab Tokf • Modell: FI 240 ALP • Baujahr: 2007 • Maschinentyp: Drahterodiermaschine (EDM – Elektrische Entladungsbearbeitung) Technische Daten: • X-Achsen-Verfahrweg: 350 mm (13,78 “)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 921022, teža obdelovanca (maks.): 750 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper angle/height: ±30° / 220 mm Machining type: submerged cutting technique Control: Windows NT with 12" TFT display, standard keyboard, and remote control Gjdpfx Ajv Ul I Djb Tskf WORKING AREA Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Taper cut: max. ±30° / 220 mm WIRE EDM SYSTEM Wire diameter: Ø 0.33 to 0.10 mm Diameter for automatic threading: Ø 0.33 to 0.10 mm Diameter for automatic rethreading: Ø 0.33 to 0.15 mm DIELECTRIC Filter: 2 paper cartridges Dielectric temperature: ±1 °C Ion-exchange resin filling volume: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire chopper - Standard interfaces (PCMCIA, Ethernet, etc.)

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Spindle taper: SK 40 Control system: HEIDENHAIN TNC 150 Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Gksdjtqqplepfx Ab Tef Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system