Stroj za upogibanje cevi

cesurbend PBH-32 E

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. Ppjdpfxol Dw D Eo Aczsl We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Pjdpot Iklksfx Aczopl Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje os Z: 500 mm, Na prodaj je pripravljalna naprava za orodje znamke Garant, tip VG1. Merilni sistem je v zelo dobrem stanju in je takoj pripravljen za uporabo. Tehnični podatki: Letnik: 2010 Merilno območje X-os: 400 mm Merilno območje Z-os: 500 mm Merilna natančnost: 1 µm Vpenjalno mesto vretena: SK50 Na željo lahko po dogovoru in za doplačilo organiziramo transport in nakladanje po vsej Evropi. Cene so brez DDV. Psdpfx Aoxf T R Rsczspl Ogled možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Možen je tudi odkupi ali menjava! Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV IPD. Potrebujete kakovosten, a cenovno ugoden stroj za obdelavo kovin za vašo proizvodnjo? Ali želite svojega prodati? Za več informacij ali možnosti kontakta obiščite našo spletno stran.

Stanje: novo, Leto izdelave: 2025, Pressure: 40 t Stroke: 250 mm Table size: 625 x 1100 mm Flat bar (flat): 200 x 20 mm Maximum pipe diameter: 2" Table height: 950 mm Working speed: 9.1 – 4.7 mm/sec Return speed: 45 mm/sec Podpfx Ajvx Dwrjczepl Machine weight: approx. 750 kg Space requirements: approx. 1.25 x 0.9 x 1 m Total power requirement: 3 kW Oil capacity: 45 l New hydraulic horizontal bending press with 4 advantages over other manufacturers: 1) Infinitely variable pressure regulation UNDER LOAD with hand wheels 2) UNDERSLUNG cylinder allows 360° bending! 3) Operation from the front rather than the side 4) Patented tapered tool holder In addition, immersion depth and return point can be set via hand wheel, infinitely variable feed rate adjustment. Machines also available in the following sizes: Pressing force from 22 to 150 t, stroke from 200 to 450 mm, as well as with 2-axis control (immersion depth + lateral stop). A wide range of tooling for various applications available on request. SIMASV bending presses have been quality machines since 1957.

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: Lifting Capacity: 5 t Span: 21,000 mm Lifting Speed: 8.0 m/min Fine Lifting: 0.8 m/min Rope Diameter: 14 mm Connected Load: 10.2 kW SINGLE-GIRDER SUSPENSION CRANE Crane Classification according to DIN 15018H2 B3 Ppsdpou Nvg Defx Aczol Crane Carriage: Designation: RF 400; Type: KBF 100 A8/2, Travel Speed: 12.5 / 50.0 m/min; and Type: KBF 71 A2, Travel Speed: 2.5 m/min Wheel Size: Ø 170 mm (16 pieces) Trolley Main Hoist: EKDH 525 H12 KV3-2/1 F10; Type: KBV 71 B8/2; Speed: 20.0 / 5.0 m/min; Wheel Size: Ø 125 mm (4 pieces) Hoisting Gear: Type KBH 125 B4; Lifting Height: 12,000 mm; Braked with traversing runner; Lifting Speed (main hoist: 8.0 m/min; fine hoist: 0.8 m/min) Single Hook Size 2.5 Rope Ø 14 mm; Rope Length: 28.3 m; Mechanism Group: FEM 1 AM Operation via pendant pushbutton controller with DST Special features: Overrun piece with locking mechanism and guiding rails + infrared Additional bridge cranes with a span of 21 meters are also available for sale.

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), DP-05180-JEC Lobe pumpa 5,5kW POLJOVNA JEC rotaciona lobe pumpa sa Nord zupčastim motorom – pogodna za sirnu skutu i viskozne proizvode Visokokvalitetna JEC higijenska rotaciona lobe pumpa, kompletna sa Nord zupčastim motorom snage 5,5 kW (izlazna brzina 379 obrtaja/min). Proizvedena 2012. godine, ova pumpa je konstruisana za blago i nežno prepumpavanje viskoznih i delimično čvrstih prehrambenih proizvoda kao što su sirna skuta, pavlaka, jogurt, voćni preljevi ili sosevi. Tehnički podaci: Proizvođač: JEC Ltd., Koreja Ppodpsh Inqisfx Aczol Model/Kod: ZF120-021-05M Godina: decembar 2012. Materijal: Prohrom (nerđajući čelik), higijenski dizajn Motor: Nord Drivesystems SK 672.1-132SH/4 TF Snaga: 5,5 kW Izlazna brzina: približno 379 obrtaja/min Prenosni odnos: 3,88 : 1 Stepen zaštite: IP55 Montaža: Na prohromskom ramu Stanje: Polovno, u izuzetno dobrom radnom stanju Područja primene: Dizajnirana za sirnu skutu, mlečnu industriju, prehrambenu, pića i farmaceutsku industriju, gde je potreban blag tretman proizvoda i nisko smicanje. Lokacija: Danska Cena: Na upit

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding power source: TIG WSM400R Ppodpfsqnt N Dox Aczjl -Cooler

Leto izdelave: 2016, Stanje: zelo dobro (rabljeno), Waukesha Lobo črpalka Model: 015 U1 2016, inox lobo črpalka s 100-litrskim zalogovnikom na mobilnem ogrodju, nastavljiva hitrost, iztok premera 60 mm, 0,0142 gal/obr., največ 800 obr/min Ppodpfegmtilox Aczsl

Stanje: pripravljen za uporabo (rabljen), skupna dolžina: 5.500 mm, skupna širina: 1.400 mm, skupna višina: 1.000 mm, lastna masa: 600 kg, Stroj za krivljenje cevi: premer 6–48 mm, za polni material: maks. 30 mm, z orodji za premer cevi 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm. Največji premer cevi x debelina: Ø 6–48 mm (45 kg/mm²). Največji radij upogibanja: 180°. Ppsdpfx Acsxcqi Eezsl

Stanje: dober (rabljeno), Leto izdelave: 1996, Pipe diameter: 6 – 28 mm Wall thickness: 2 mm Minimum bending radius: 2 x D Control system: IPU 20 Maximum bending radius: 5.0 x D mm Maximum bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space required: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and display in the control panel for presetting the bending angle, angle detection and measurement via absolute rotary encoder, automatic tool plate return, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulic on/off, mode selection, clamp open/close, advance/retract clamping, mandrel in/out, bend in/out, lock/unlock, mandrel lubrication, rotation device in/out, tool plate return, length stop forward, emergency stop. The machine comes from prototype production and was only used occasionally until 2000. Subsequently, the machines from this department were sold. The buyer Psdpfjvtgn Njx Aczspl never used the tube bending machine, so it has only been in storage since then and has not been operated (original paint). Machine at a special low price! This is a used machine, therefore sold under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.