Enota za sesanje in filtriranje

CATTINAIR

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Kompaktna izvedba – debelina robnega traku 0,4 – 8 mm Gjdpfx Afexrr Uzjqjil SPS zaslonsko krmiljenje Edge-Control PPC 221 s barvnim zaslonom Predrezalna enota pred lepilno enoto Popolnoma avtomatski magazin za robni material za kolutni in trakasti material Lepilna postaja GLU JET s kartušami + PU lepljenjem – multisistem+ Nanos lepila z uporabo šobne tehnologije Višina obdelovanca: 6–65 mm Avtomatska nastavitev višine lepila Stiskalna enota 1912-3 pnevmatska Odrezovalna enota 1918 pnevmatska za kolutni in trakasti material do 8 mm debeline robu S pnevmatskim nastavljanjem naklona od 0–10° za odrezne žage Rezkalna enota za poravnavanje do 8 mm, radijsko rezkanje – posnetje faze 15° preko upravljalne plošče Oblikovna rezkalna enota 1832 pnevmatska: zaobljanje robov do debeline 3 mm v prehodu Strgalo za posnetje faz in radije Ravnina strgala – končna obdelava Škropilna enota – PU Kompletna DIA-oprema orodij vključena Stroj je DELAVNIŠKO OBNOVLJEN, v ODLIČNEM STANJU Na voljo iz zaloge Lieboch

Leto izdelave: 2023, Stanje: novo, Always in stock, available in left- and right-hand versions with automatic motorized cleaning. Riedex DM-200 Motor power: 4.0 kW Plug-and-play. Packed on a pallet! Ready for shipping. Alternatively available with JET cleaning system. Many different configurations possible: - with rotary valve (can be supplied with base frame if required) Godpoku Aibjfx Afqeil - with briquetting press and more...

Stanje: dober (rabljeno), Ceia THS Kontrolní váha s detektorem kovů Godstt D S Uspfx Afqoil Nerezová kontrolní váha s detektorem kovů, průchod 340 mm x 100 mm, vážicí plošina 420 mm x 290 mm, s odfukovým odmítacím systémem do odmítacích košů, s tiskárnou, mobilní provedení, 1fázové napájení.

Stanje: novo, Vacomats are mobile dust extractors designed to remove large volumes of dust and chips in confined spaces. These clean air extraction units (negative pressure), intended for indoor installation, can be used for single- or multi-machine extraction with air volumes of up to 10,000 m³/h. Manufactured according to the latest EU standard EN 16770, they are specifically suitable for woodworking operations where increased safety requirements apply due to the risk of dust explosions. Suitable for dusts classified under explosion group St1. Filter cleaning on the Vacomat XPe models is performed entirely electro-mechanically via an efficient shaking motor, which starts automatically once all connected machines are switched off. Control is managed via potential-free contacts triggered by the woodworking machine. The control for motorized shaking is included in the delivery. Supplied without coils. Gisdpfx Aju T Dv Eofqjl Features: - Motorized filter regeneration - Mobile design - Extraction side configurable to the right or left - Height reduction possible for transport ----- Technical Data ----- - Extraction nozzle diameter: 200 mm - Airflow: 2,495 m³/h - Rated airflow: 2,262 m³/h - Max. negative pressure: 2,000 Pa - Filter surface: 14.5 m² - Residual dust content: < 0.1 mg/m³ - Number of bags: 3 - Motor: 4.0 kW - Dimensions (LxWxH): 2,645 x 900 x 2,130 mm - Weight: 500 kg - Sound pressure level: 73 dB(A) - Dust class: M Includes: built-on control cabinet

Leto izdelave: 1991, Stanje: dober (rabljeno), Dust extraction, welding fume extraction, filter ventilation, self-cleaning pneumatic vacuum dust collector, extractor for plasma cutting, laser, sandblasting, and all types of dry dusts. Donaldson Torit Model: 3DF18 Cyclo – with pre-separator Cartridge filter elements are pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Giedpfx Ajmrm Rasfqjl The fan is positioned after the filter on the clean air side, minimizing explosion risk. Cartridge filter elements. Fan power: 7.5 kW Capacity: 6,000 m³/h Vacuum: 3,000 Pa Filtration area: 378 m² Inlet diameter: 350 mm Ultra WEB cartridge filter elements – 18 pcs.

Stanje: novo, Clean Air Extraction Unit SCHUKO Vacomat 140/160 XPe - Exhibition Model - Motorized filter system, mobile, extraction port can be mounted on either the right or left side ----- Technical Data ----- Certification: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal airflow: 1,447 m³/h, Max. negative pressure: 2,200 Pa, Filter surface area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Giodpeu R Szyefx Afqol Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - New exhibition machine -

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, nosilnost: 2.000 kg, dvižna višina: 6.350 mm, vrsta goriva: električni, tip droga: triplex, dolžina vilic: 1.150 mm, barva: rumena, gorivo: elektrika, Brand: Aisle-Master Model: 20NE Capacity: 2,000 kg Year of manufacture: 2022 Mast type: Triplex Lifting height: 6,350 mm Godpot Dwbdofx Afqsil

Stanje: rabljeno, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging system Fan Type S 140 / 0 / S1 Serial No. Year of manufacture 12 / 2004 Nominal air flow: 1451 m³/h Negative pressure: 1398 Pa Filter area: 18 m² Extraction connection: Ø 140 mm, reduced to Ø 120 mm Air outlet: 480 x 480 mm Motor power: 1.1 kW Power supply: 400 volts, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning via shaking motor - 2 discharge pipes at the bottom for waste collection bags, each Ø 500mm reduced to Ø 300mm - Dry fire extinguishing line with connection for C-hose, fire brigade connection for filter fire - Differential pressure switch for detecting filter contamination - Without control system (no control unit included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as shown in photos: 3050 mm Required space (L x W): 1850 x 1000 mm Weight: approx. 400 kg Gisdpfxsr R Ewlj Afqol Very good condition Ideal for wood dust, wood chips, plastic dust, or plastic chips.

Leto izdelave: 2019, Stanje: dober (rabljeno), Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 The filter is cleaned via a microprocessor-controlled compressed air pulse system during operation, ensuring high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central filter ventilation unit, Filtercube, equipped with cartridge filters, provides an ideal solution for almost all challenges in fume and dust filtration. The fan is located on the clean air side, which minimizes explosion risk. Applications: - Central extraction system for multiple welding booths Godpenyhvqofx Afqjil - Extraction system for welding robots - Extraction system for thermal cutting tables and grinding stations - General hall ventilation filtration (push-pull, displacement systems) - Extraction in combination with extraction tables - Extraction for grinding of non-explosive materials Specification: - 5.5 kW fan motor - Capacity: 3800 m³/h - Vacuum: 3250 Pa - Inlet diameter: 250 mm - Filter area: 100 m² - Equipped with "DUST-VAC" unit, which automatically transfers dust to a separate container - Option to order new filter cartridges tailored to specific customer needs - Complete technical documentation included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 - 8 manually adjustable supports along X-axis - 3 vacuum suction cups per console - Vacuum pump 100 m³/h -2* - Vacuum connection for templates - LED display for suction cup position indication - Working area X: 200 – 6150 mm - Working area Y: 0 – 1600 mm for milling/drilling, up to 1525 mm with edge banding - Working area Z: 12 – 125 mm (clearance 150 mm) Gjdpoxrltksfx Afqeil - 14 vertical drilling spindles - Horizontal drilling and grooving saw unit, swiveling 90° - Milling spindle 11 kW / 7.5 kW up to 24,000 rpm - With C-axis, 360° interpolation, liquid circulation cooling - 18-position tool changer mounted on Y-support - VT 100 edge banding unit, 4-sided/complete, rotation range 740 degrees - With 2-position roller magazine, automatic granule feed Adapter units: – Fixed saw 90° – 5-axis saw/drill/milling unit, Vario NC – Horizontal milling head (corner notching) – Flush milling and profile scraper with flat scraper extension - ICOS open control with 17″ TFT - ImaWop 6.0 including MDC and production list software - Chip conveyor - Side safety fencing and front safety mats - Rear: wall installation or separate safety protection required