Nakladalec na kolesih

Caterpillar IT62H

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 25.000 h, številka stroja/vozila: CAT09500EAYL02286, Stroj u ispravnom radnom stanju. Ksdpfx Adsww Nv Aokeww

Stanje: dober (rabljeno), Leto izdelave: 2011, Fully automatic wood infeed with feed roller conveyor Extension for cross conveyor and infeed roller conveyor for timber lengths up to 13 m Cross conveyor for loading and feeding Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse groove milling machine Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning system "two-hand operation" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm timber tray Kwjdpswuppwefx Adksw Safety devices and perimeter guarding

Stanje: rabljeno,

Stanje: dober (rabljeno), Leto izdelave: 1996, skupna masa: 9.960 kg, JENZ AZ 35 D/Električna težava/Rezalnik/Seckalnik • Proizvajalec: Jenz • Tip: AZ 35 D • Leto izdelave: 1996 • Skupna masa: 9960 kg • Motor: Mercedes-Benz, 6-valjni • Električna težava • Rotor in kladiva v redu • Izmetni trak kot nov • Moč: kW/ KM • Dokumentacija • Nemški stroj Kodexb Dkyepfx Adkjww • Takojšnja pripravljenost za uporabo • Ta ponudba ni zavezujoča in je predmet sprememb. - Možna predhodna prodaja, - Napake in/ali tipkarske napake niso izključene. - Prodaja po naših splošnih pogojih poslovanja.

Stanje: rabljeno, Leto izdelave: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that secures panels and sheets using vacuum pressure. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is fitted with a set of valves that allow switching different table zones on or off, focusing the vacuum in a specific area and optimizing the clamping of small components. Capable of interpolated milling and drilling of composite panels, as well as aluminum, steel, or titanium sheets, and aluminum profiles. Tekna supplies user-friendly software that can be operated by both experienced CNC programmers and users with less experience. TKE 783 is a machining center with 3 controlled axes, designed for interpolated drilling and milling of composite panels, aluminum, steel, or titanium sheets, and aluminum profiles. Technical specification: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Table dimensions: 2010 x 6300 mm Weight: 4842 kg Travel speeds: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: Used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. Kwedpjv D A Imsfx Adksw If you have any additional questions, we will be happy to answer them.

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine For use without a power supply (e.g. breakdown service vehicles or mobile tyre service) The compressor is used, built in 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you not only the usual advantages of RENNER systems but also, above all, flexibly available compressed air on construction sites, in service vehicles, and for many other applications "without a power socket". They guarantee a reliable compressed air supply independent of location. The small version is mobile and can be repositioned quickly thanks to the ergonomic handle, while the larger variant, with its compact design, can easily be moved with a pallet truck or forklift and loaded onto vehicles. VE = Electric Start. Please note: supplied without battery. Technical data: Intake capacity: 550 l/min Effective output: 400 l/min Petrol engine: 3.6 kW Honda unit with 4.8 HP Max. pressure: 10 bar Cylinders/stages: 2/1 Speed: 1,400 rpm Sound level: 98 dB(A) Air receiver: 50 l Kjdsd H Dr Sepfx Adksww Dimensions (L x W x H): 810 x 460 x 830 mm Weight: 70 kg Visit our store in Erlangen. We have a large selection of new and used compressors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 67 kW (91,09 KM), obratovalna teža: 9.800 kg, Leto izdelave: 2005, številka stroja/vozila: CAT0432DKWEP01798, odlično stanje Kwodpfx Aoylmkxjdksw

Stanje: novo, številka stroja/vozila: 246203 xxxx, Funkcionalnost: popolnoma funkcionalen, Model-making portal milling machine – Ideal base for building CNC machines and applications. The FB2 flat-bed unit is excellently suited for entry into CNC technology and is perfect for model making and hobby use. The FB2 is also often utilized in industry for measurement and dosing technology, as it offers extensive expansion options. Access to the isel modular system is also available with this unit. Various sizes with travel ranges from 530 x 500 mm up to 1030 x 1250 mm, as well as options like machine base and enclosure, are available and can be individually configured. IDEALLY SUITED FOR: • Optimal for laboratory, model-making, and workshop applications • Assembly and mounting • Printing and engraving • Drilling and milling • Dispensing and screwing • Shaping and modeling • Gluing and potting • Soldering and welding • Measuring and testing • Sawing and cutting, etc. Ksdpfxehqmame Adkeww Z-clearance = 190 mm (Z-clearance = 300 and 500 mm available on request!) FEATURES: • Durable 200W class stepper motors • Drive systems equipped with robust LES units with steel ball screw spindles • Workpiece clamping via T-slot table • Available with or without safety enclosure • Adjustable portal clearances according to customer application OPTIONS: • iFM or UFM spindle motor • Coolant spray system • Cool-Min cold air cooling • Automatic tool length measurement • Rotary axes • Workpiece clamping systems (toggle clamps, vacuum tables, etc.) • Extraction systems • LED machine area lighting • Choice of RAL color finish • CAD/CAM software • Z-clearances of 190 mm, 300 mm, or 500 mm • High-performance 4-axis motion controller • Machine base frame • Enclosure with sliding/folding door

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kompletna pakirna linija Ilapak, sestavljena iz večglave tehtnice Ilapak model WA 10/50 in vertikalnega pakirnega stroja Ilapak model VT 2000 GF S s premerom cevi 185 mm. Leto izdelave obeh strojev: 2012. Vključuje čistilno platformo za tehtalne lijake. Kwodpfx Aoxl T Ayedksw

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 44 kW (59,82 KM), vrsta goriva: dizel, skupna masa: 5.400 kg, lastna masa: 3.500 kg, Leto izdelave: 1999, dobro stanje Kjdpfx Aoyv Db Dodkjww