Ventilator za odsesavanje prahu 37 kW

CAT Blower IF

Stanje: generalkompletno obnovljen (rabljeno), Druck: 150 t Duedpegd H Tpjfx Afljl Hubweg: 140 mm Tischgröße: 510 x 530 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Dusdpfxeph Uk No Aflsl Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 82 mm Centre distance: 2000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Spindle speed range: 9 - 1600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Dujdpfod I A Aujx Aflol Quill travel: 150 mm Quill taper: Morse Taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3132 x 975 x 1270 mm

Stanje: rabljeno, Brugte vertikale tanke, kapacitet 40.000 liter Udvendige mål: Diameter Ø 3200/3400 mm, total højde 9600 mm inkl. gear. Cylinderhøjde: 7200 mm. Vertikale rustfri ståltanke – 3 stk. Isoleret med 100 mm stenuld og afsluttet med plan plade. Kegleformet bund 35 grader med 4" udløb. Klöffer-top med mandehul. Dujdpoi E Abiofx Aflol Kraftig toptilsluttet omrører. 37 kW omrører. AISI 316.

Stanje: novo, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool mount, shaft diameter: 80 mm Tool diameter: 245 mm Working speed: 4.5 m/min Motor: 4 kW Hydraulics: 30 t Dimensions (LxWxH): 1450 x 1050 x 1800 mm Weight: 1,400 kg 3 driven rollers Hardened standard rollers Hardened and ground tool mount, shaft Dujdoh T Ulnspfx Aflel Mobile control panel Horizontal and vertical operating positions Digital display Compliant with CE standards

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Clear opening height 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature display on tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots according to customer specification, otherwise 22 mm i) Controls mounted on a pivoting arm attached to the bridge j) Pressure adjustable from 50 T up to 300 T via MONITOR k) Bridge travel driven by two geared motors, rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine body double-coated n) Cylinder induction-hardened Design Type: Gantry Press Duedpfjh Agnuex Aflsl Thermally neutral 80–120 °C Number of operator sides: 3 Forces Maximum pressing force: 3,000 kN Maximum free tear-off force: 500 kN Pressure build-up time (closed die, steel on steel): Max. 3 sec Dimensions Maximum opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 980 mm Height above floor (overall height): approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at maximum closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press (without operating fluids and table plate): approx. 22 T Speeds Rapid closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Sound Pressure Sound level measured at 1.5 m height at control panel: max. 78 dB(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders: 1 Operating pressure: max. 350 bar Pressing pressure build-up time: 2-3 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: HLPD 46 MW, 900 liters Ambient temperature: max. 45 °C Oil temperature: max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Connection for hydraulic main motor: IE3, 22 kW Total connected load: approx. 30 kW

Stanje: novo, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Duodpfod Rw Rhex Aflsl Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x width: 200 / 155 mm Flat grinding table: 460 x 150 mm Extraction port Ø: 100 mm Motor output S1 100%: 2.1 / 2.8 kW Motor input S6 40%: 2.8 / 3.6 kW Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Approx. weight: 85 kg

Stanje: novo, Leto izdelave: 2025, Main features, functions, and advantages of the welding positioner: Functions: 1. Rotation direction switch-off: Allows control of the turntable’s rotation direction. 2. Rotation direction change switch: Enables changing the direction of the turntable rotation. 3. Stepless rotation speed adjustment: This function allows you to set the turntable's rotation speed to suit a specific task. 4. Robust, compact design: Durable construction ensures longevity and reliability of the unit. 5. Foot pedal control: Facilitates convenient operation of the positioner. 6. Thermal fuse: Provides additional safety during equipment operation. 7. Brushed motor: The brushed DC motor is suitable for a range of applications. 8. Turntable tilt range 0 - 90°: The ability to tilt the turntable from 0 to 90 degrees is useful for welding in various positions. 9. Option to install a centering chuck: Allows for additional alignment of workpieces. Advantages: 1. Increased work efficiency: The positioner helps enhance productivity in assembly and welding processes. 2. Reduced production costs: Automation or the facilitation of rotating components can contribute to lower production costs. 3. Consistency of welds: The device helps maintain uniformity and quality of welded joints. 4. Flexibility of use: The ability to adjust speed and rotation direction makes the unit adaptable to different tasks. 5. Improved working conditions for the welder: Provides the welder with a more ergonomic and comfortable working position during welding. Set includes: 1. PS-500 positioner unit 2. Foot pedal control 3. Power cable 4. Operating manual 5. Boom with welding torch holder The PS-500 positioner by CORMAK is a valuable tool for industries requiring rotation and alignment of workpieces, especially during welding processes. It helps increase productivity, reduce costs, and improve quality. Technical specifications: Maximum load: 300 kg Table diameter: φ500 mm Tilt angle: 0° ~ +90° Rotation speed: 0.2 ~ 2.5 rpm Rotation power: 200 W Tilting: manual Voltage: 220V, single phase, 50Hz Torch support: yes Dimensions: 700 x 650 x 710 mm Weight: 97 kg Duedporigmgefx Aflsl *Three-jaw chuck is not included in the set.

Stanje: novo, Technical Data: Band speed: 15 / 30 m/s Grinding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Flat grinding table: 400 x 100 mm Dedpfx Asqvmqysfloul Contact wheel ø x width: 195 x 100 mm Extraction port ø: 2 x 75 mm Speed: 1420 / 2660 rpm Motor power: 2.5 / 3.3 kW Dimensions (W x D x H), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension thanks to spring-loaded tensioning mechanism - Standard with round grinding device for diam. 20 - 76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface improves the sliding properties of the abrasive belt - Large-sized flat grinding surface with protective cover - Low belt speed (15 m/s) ideal for grinding stainless steel and aluminium - User-friendly belt change, quick and straightforward - Fast and easy change of grinding rollers without tools - Various grinding angles from 30° to 90° possible without issue - Shorter processing times compared to milling Scope of supply: - Abrasive belt K 36 - Rubberised grinding roller - 1 pc. grinding roller for 1 1/4" (42/44 mm tube) - 2 pcs. foldable protective screens - Grinding and support table - 2 x dust extraction ports diam. 75 mm - 2 pcs. chip collection containers - Graphite coating - Motor protection switch

Stanje: novo, Leto izdelave: 2018, številka stroja/vozila: DF0116 - Rev.00, Press force: 110 t Clear width: 1300 mm Stroke: 1500 mm Machine weight approx. (without operating fluids): 12 t Dimensions (L x W x H): approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Column diameter: 140 mm Djdpfx Aodxvfleflsul Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Other components colour: RAL 7021 Cladding and balcony colour: RAL 1021 Motor power: 18 kW Max. approach speed: 300 mm/sec Pressing speed: 15 mm/sec Oil tank: 150 l Control system Siemens: S7 1200