Rezalnik furnirja

CASATI CIO 31

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Naprodaj: prečna lepilka za furnir Fisher+Rueckle FZR-24, letnik 2013! Dolžina traku furnirja: 400–1100 mm (dvojna linija) / 350–2100 mm (enojna linija). Širina traku: 50–500 mm. Debelina traku: 0,3–1,5 mm. Največji nazivni izhod/cikli stroja: 30 ciklov/min. Povprečna hitrost proizvodnje: 17–20 ciklov/min. Učinkovita dolžina grelne cone: 2478 mm. Priključna moč: 22 kW. Komprimiran zrak: 6 bar. Vrste lepila: na osnovi PVA ali UREE. Dedpjumrf Ajfx Abgjci

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Dcedpfsx D H Hcjx Abgoi Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Djdpfx Asu Agh Ssbgeci Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, double tenoning and double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units Maximum length: 2500 mm Dcsdpfx Abew A A E Ijgsi

Stanje: pripravljen za uporabo (rabljen), Four-side planer / Timber planing machine Dcsdow Dn Uqepfx Abgsi Maximum working width: approx. 55 cm Maximum working height: approx. 14 cm Immediately available Location: Austria, near Grieskirchen

Stanje: dober (rabljeno), Stroj je sestavljen iz dveh enot in ima naslednje funkcije: 1. Vrtanje lukenj za grče 2. Rezkanje moznikov 3. Vbrizg lepila 4. Vtikanje moznika Popolnoma očiščen lepilni sistem; Pozicijski laser; Pošljemo vam lahko video delovanja stroja. Dsdjtpqafopfx Abgjci Čas procesa je približno 3 sekunde na takt. Pokličete ali nam pišete. Govorimo in pišemo nemško in rusko. Sporočila lahko pošljete tudi v angleščini. 5.3.4

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, For sale: used Rilesa Unix drilling machine - 4 top-mounted drilling units Dcjdeu Shx Djpfx Abgsi - 4 rear drilling units - Right and left operation

Stanje: rabljeno, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on a pedestal u- re-li-o-u.o Without feed unit machine only The machine is dismantled and immediately available Dedpsncc Igsfx Abgjci Transport can be arranged

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Configuration: soft drum with electronic segmented pad. Working width: 1150 mm Dsdpfx Ajgq U R Njbgjci Abrasive belt dimensions: 1180 x 2620 mm Pressure rollers for short workpieces. Vacuum fan included. Air blow-off on both units. Total weight: 2500 kg Two motors: 7.5 kW and 15 kW Total power: 27 kW Condition: very good, regularly serviced machine. Available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm, max. 100 mm - Feed rate: 5–30 m/min, stepless adjustment - Roller conveyor included - Condition: as new The machine can be inspected and tested if you are interested. Djdstykw Sepfx Abgsci If you have any questions, please feel free to contact us.