Odluščevalnik

Cambio Cambio 45

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2025, 1) Roundwood handling yard with 10 boxes (discharge boxes) – New and used Tedpjykr Aqefx Aiqjc New roundwood infeed and sorting line Feed speed 50 m/min. Includes the following used components: - Cross conveyor infeed step feeder, new - Log transfer carriage, used - Log transfer carriage with ejector, used - Cambio 50 debarker, used - Slab scanner with belt, used - Measuring zone and sorting log transfer carriage Including debarking; inspection and painting; including roundwood infeed. Excluding boxes, cladding, measuring system, outfeed control, and control cabinet. Root reduction included. 2) Roundwood infeed for chipper line Heavy-duty roundwood cross conveyor, NEW - 4-strand roundwood cross conveyor - Axle spacing: 7.5 m - Overall length: 8.0 m - Drive shaft diameter: 100 mm - Chain: bushing conveyor chain, pitch 100 mm – heavy-duty design - Fixed end stops at the rear, without cladding - Steel substructure: HEB 200, installation height: 1000 mm - Drive: geared motor 7.5 kW 3) Log alignment conveyor (Entzerrer) NEW - Number of chains: 4 - Axle spacing: 3,500 mm - Overall width: 5,730 mm - Lug spacing: 1,000 mm - Drive shaft diameter: 100 mm - SEW drive: 7.5 kW - Speed: 10 m/min - Version: completely clad between chain tracks 4) Step feeder, NEW - Number of feed steps: 4 - Width: 4,200 mm - Plate thickness (movable steps): 12 mm; (fixed steps): 20 mm - SEW drive: 18.5 kW - Drive via crank mechanism and geared motor 5) Chipper line (Make: WD) Log transfer carriage before RB 2 infeed Length to be extended to 18.5 m – with drive and return station RB 2 infeed: - Driven chain bed with steel enclosure, designed for side feed of logs - Conveyor chain with carriers, welded frame structure Infeed & centering unit ZE - With log rotation device (TDV) and centering unit - Infeed unit ZE - Log length: 2.5 – 5 m - Minimum clear width: 80 mm - Maximum clear width: 780 mm - Installation height: 1,000 mm - Weight: 5,400 kg Profile chipper FZ 3 - Machine frame with base - 2 knife head housings with main bearing - 2 knife heads with finishing segments - Drive power: 90 kW - Roundwood diameter: min. 100 mm / max. 400 mm - Chipping height above chain: max. 515 mm - Distance between discs: max. 570 mm / min. 60 mm - Disc diameter: 1,260 mm - Positioning by electric motors 2 hydraulic power units, 35 kW each, for pre- and post-cutting Cant turning device for pre-cut Electrically driven roller conveyor TR 800 Centering and infeed unit ZE with FZ 3 chipper

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Braun-žaga tip CH6B-70, letnik 1972 Nihajni okvir brez nastavitve širine z razcepnim klinom Napenjač žage - stranski pritisk hidravlični, letnik 1989 Prečni transporter za hlodovino, 4 verige, približno 7 m dolg, letnik 1980 Razvrščevalnik hlodovine, 5 verig, približno 1,40 m dolg, letnik 1980 Napetostni voziček Mayerhofer tip VH s pomožnim vozičkom, letnik 2002 Pogonski transportni valj za žago, 4 m dolg, 1,60 m širok, letnik 1980 Pogonski transportni valj za žago, 1,60 m širok, približno 15 m dolg z integriranim izmetavalcem s 5 verigami Tsdpfx Aijv I D Ezeqsc Prečni transporter, 5 verig, približno 6 m dolg za stransko blago, letnik 1980 Oprema za ostrenje, sestavljena iz: Meinert nastavljalni stroj za žagine liste PH4D, letnik 1967 Vollmer avtomatski nastavljalni stroj za žagine liste AT

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 60 mm, širina valja: 62 mm, skupna širina: 160 mm, skupna višina: 150 mm, skupna dolžina: 3.000 mm, razmak osovin: 33 mm, Težki dvojni valjčni tirnice, 6 kosov Tsdpfx Asrby Iloiqjc Valjčne letve Dolžina posamezne tirnice: 3 m Tirnice je možno poljubno opremiti z valjčki.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1990, Bobnasta sekljalnica / Sekljalni stroj / Drobilnik lesa temeljito obnovljen (obnovljen v delavnici) Proizvajalec: Rudnick & Enners Letnik: 1990 sestavljen iz: Todpfxozq Sqgs Aiqec Bobnasta sekljalnica Rudnick & Enners, tip TH-200/650/3 obnovljena v delavnici (temeljito obnovljena) z novimi ležaji (nižnimi valjčnimi ležaji) in preverjenim rotorjem noži in proti-noži so novi Širina/višina dovodnega odprtine: 650 x 200 mm Premer rotorja: 600 mm Premer lukenj sita: 50 x 50 mm Moč pogona: 75,0 kW Pogon za dovod: 2 x 3,0 kW Teža: približno 3.500 kg Barva stroja: RAL 6011, zelenkasta brez električne instalacije in brez omarice za nadzor

Stanje: zelo dobro (rabljeno), Brusilni stroj za nože GRIFO s priloženo mizo, mehanski, dolžina 1.500 mm Todpfx Aioykrzyoqsc

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, moč: 45 kW (61,18 KM), skupna masa: 4.700 kg, barva: siv, Maximum chipping height: mm 200 Infeed width: mm 650 Number of infeed rollers: pcs 3 Rotor flight circle: mm 600 Chipping length approx.: mm 20-30 Output capacity: 18 – 22 cubic meters/hour wood chips Chipping knives: pcs 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Infeed: horizontal Machine frame: Steel, gas-shielded welded Rotor: Steel, gas-shielded welded, dynamically balanced Bearing: Oversized rolling bearings Bearing housing: Steel, flange-mounted Feed rollers: Steel, specially toothed Tedpfx Aijynzg Hjqec Chip outlet: below the machine Machine grate (screen): for secondary shredding of oversized pieces Drive pulley: matched to main motor N=1500 rpm Hydraulic system: consisting of hydraulic pump, accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: Driven by 2 gear motors, manufacturer NORD GETRIEBE

Stanje: rabljeno, Leto izdelave: 2010, težek drobilnik z velikim rotorjem malo delovnih ur Tsdoxddukjpfx Aiqsc rabljeno, odlično stanje, malo uporabljen Znamka: DHB-Maschinenbau Tip: 800 Leto izdelave: 2010 Delovne ure: 2108 Št. stroja: 30123 CE-tipno preizkušeno Motor: 30 + 2,2 kW Počasni pogon s hidravličnim potisnim dnom Velikost lijaka: 800 mm x 1000/1300 mm / 1,25 m³ Širina rezalne enote: 800 mm Rotor: 800 x 400 mm premer Dušilci vibracij Število nožev: 46 kosov, konkavni Velikost lukenj sita: 15/20 mm Nova cena približno 45.000,00 € Priključek za odsesovanje D 200 mm Prostorske zahteve cca 2700 mm x 1600 mm x 1900 mm Teža cca 3400 kg Skupna priključna moč cca 32,5 kW Skladišče: 97447 Gerolzhofen, naloženo prosto, nezapakiran Predaja v videnem stanju brez garancije in jamstva

Stanje: novo, The new Pilous DB700Automatic double edger stands out for its top functionality and long service life thanks to its robust construction. - 3 powered steel feed rollers below, 2 idling pressure rollers with rubber coating above - Control panel for automatic saw blade adjustment - Number of saw blades can be expanded as required - 2 return rollers on the machine for easy workflows - 4 rows of anti-kickback technology - Multiple emergency stop switches - Clearly positioned, easy-to-read scale - Saw shaft made of extra hardened premium steel (60HRC) for longevity - Developed, built, and quality-tested in Europe! Technical data: Clearance width 700 mm Maximum cutting height 75 mm Minimum cutting height 10 mm Side fence 1000 mm Table length 500 mm Minimum cutting width 15 mm Maximum cutting width 520 mm Cutting width adjustment Automatic Minimum board length 800 mm Saw blade diameter up to 300 mm (not included) Speed 3500 rpm Shaft diameter 50 mm Kerf 3.2 mm Motor 11 kW Feed speed Stepless, 4–18 m/min Dimensions 1500 x 1900 x 1200 mm Working height 830 mm Weight approx. 1050 kg Tedpfx Asvrvgrjiqoc Optional equipment: - 15 kW motor power, recommended for more than 2 saw blades - 2 lasers (1 fixed, 1 adjustable) - Table length 2000 mm - Top pressure rollers made of steel + additional powered roller below - Additional saw blade mount (1 pc.) on fixed unit - Additional saw blade mount (1 pc.) on movable unit Extras not included in the price. (Image for illustration purposes only)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 5.500 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 40 mm, vrsta vhodnega toka: trifazni, število vreten: 9, moč: 95 kW (129,16 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed Tedpfx Aiox Hkp Noqsc working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6 – 36 m/min, spindle arrangement: 1-bottom (5.5 kW) 2-right (5.5 kW) 3-left (5.5 kW) 4-right (5.5 kW) 5-top (11 kW) 6-bottom (5.5 kW) 7-top (7.5 kW) 8-bottom (37 kW) 9-universal (11 kW) 5 powered rollers in the table

Stanje: dober (rabljeno), Gear motor, electric motor, three-phase motor - Speed: 103 rpm - Power: 1.1 kW - Design: B3 Tsdsb A R Nqspfx Aiqjc - Shaft diameter: Ø 30 mm - Protection class: IP 33 - Quantity: 1 unit available - Weight: 28 kg